Finite element modelling of wall pressures in a cylindrical silo with conical hopper using an Arbitrary Lagrangian-Eulerian formulation

Abstract Silos, especially the ones consisting of cylindrical section with conical hopper, are commonly used for bulk material handling in many industries. Whilst the pressure acting on silo walls during filling is reasonably well understood, a reliable prediction of pressure during discharge remains an important open problem for silo design. This paper describes a finite element analysis of the granular flow in a model silo consisting of a cylindrical section with a conical hopper. The computations were performed using an Arbitrary Lagrangian–Eulerian formulation with an explicit time integration approach to permit large deformations and overcome mesh distortion problems. The finite element results of silo pressure were temporally averaged and compared with the experimental observations in a model silo, which shows a satisfactory agreement in the wall pressure distribution. Two critical modelling issues have been addressed in some detail: one is the numerical treatment of the abrupt transition between the cylindrical section and the conical hopper, and the other is the interaction between the granular solid and the silo walls that is modelled using a dynamic friction model in this study. The simulation results show significant pressure fluctuations during silo discharge, which are comparable to the fluctuating pressure patterns reported in previous experiments. Two dominant frequencies are identified from the dynamic pressure, and a scrutinization of the simulation results suggests that the causes may be attributable to the propagation of the longitudinal waves within the stored granular solid and the intermittent macro-slip of the granular solid against the silo wall. These dynamic events could be a source of silo quaking and honking phenomena.

[1]  Yin Wang,et al.  Numerical modelling of dynamic pressure and flow in hopper discharge using the Arbitrary Lagrangian–Eulerian formulation , 2013 .

[2]  C. A. Brockley,et al.  The Time-Dependence of Static Friction , 1968 .

[3]  N. M. Newmark,et al.  Test and analysis of composite beams with incomplete interaction , 1951 .

[4]  Yunming Yang,et al.  Numerical analysis of silo behavior using non-coaxial models , 2011 .

[5]  R. M. Nedderman,et al.  Theoretical prediction of stress and velocity profiles in conical hoppers , 1993 .

[6]  J. T. Oden,et al.  Models and computational methods for dynamic friction phenomena , 1984 .

[7]  Gianluca Ranzi,et al.  Locking problems in the partial interaction analysis of multi-layered composite beams , 2008 .

[8]  Alessandro Zona,et al.  A steel–concrete composite beam model with partial interaction including the shear deformability of the steel component , 2007 .

[9]  Jörg Schwedes,et al.  DYNAMIC MEASUREMENT AND SIMULATION OF BULK SOLIDS DURING SILO DISCHARGE , 2003 .

[10]  Mohammad Asaduzzaman Chowdhury,et al.  The effect of amplitude of vibration on the coefficient of friction for different materials , 2008 .

[11]  D. C. Drucker,et al.  Soil mechanics and plastic analysis or limit design , 1952 .

[12]  Andrea C. Santomaso,et al.  Simulation of dense granular flows: Dynamics of wall stress in silos , 2009 .

[13]  E. Rabinowicz,et al.  Friction and Wear of Materials , 1966 .

[14]  Songxiong Ding,et al.  Loads on walls and inserts in a mass-flow silos , 2003 .

[15]  Gianluca Ranzi,et al.  Full-scale long-term experiments of simply supported composite beams with solid slabs , 2011 .

[16]  A. G. Razaqpur,et al.  A finite element for modelling the nonlinear behavior of shear connectors in composite structures , 1989 .

[17]  H. D. Wright,et al.  The deformation of composite beams with discrete flexible connection , 1990 .

[18]  R. Nedderman.  Statics and Kinematics of Granular Materials: Euler's equation and rates of strain , 1992 .

[19]  Tomasz Wróblewski,et al.  Vibration of Steel–Concrete Composite Beams Using the Timoshenko Beam Model , 2005 .

[20]  D. Moore,et al.  Principles and Applications of Tribology , 1976 .

[21]  J Eibl,et al.  A dynamic finite element model for silo pressures and solids flow , 1998 .

[22]  J. Tejchman,et al.  FE-studies on rapid flow of bulk solids in silos , 2001 .

[23]  D. M. Walker.  An approximate theory for pressures and arching in hoppers , 1966 .

[24]  Fabrizio Gara,et al.  General method of analysis for composite beams with longitudinal and transverse partial interaction , 2006 .

[25]  Brian Uy,et al.  Ultimate strength of continuous composite beams in combined bending and shear , 2004 .

[26]  Jianguo Nie,et al.  Steel-Concrete Composite Beams Considering Shear Slip Effects , 2003 .

[27]  A. Sarkar.  Friction and wear , 1980 .

[28]  J. M. Rotter,et al.  Normal pressures and frictional tractions on shallow conical hopper walls after concentric filling: Predictions and experiments , 2013 .

[29]  J. R. Johanson,et al.  Bin Loads—Part 3: Mass-Flow Bins , 1973 .

[30]  E. Rabinowicz.  The Nature of the Static and Kinetic Coefficients of Friction , 1951 .

[31]  Francisco Ayuga,et al.  Analysis of dynamic discharge pressures in cylindrical slender silos with a flat bottom or with a hopper: comparison with Eurocode 1 , 2005 .

[32]  Dan M. Frangopol,et al.  Nonlinear Analysis of Composite Beams with Deformable Shear Connectors , 1998 .

[33]  Jørgen Munch-Andersen,et al.  Silo model tests with sand , 1992 .

[34]  Pierre Chapelle,et al.  A hybrid numerical model for predicting segregation during core flow discharge , 2006 .

[35]  Tsuneo Matsubayashi,et al.  On the Dynamic Behavior of Machine Tool Slideway : 3rd Report, Pitching and Yawing Motion of Moving Element Caused by Stick Slip , 1970 .

[36]  P. Aguado,et al.  SE—Structures and Environment: Static and Dynamic Silo Loads using Finite Element Models , 2001 .

[37]  Brian Uy,et al.  Analysis of composite beams in the hogging moment regions using a mixed finite element formulation , 2009 .

[38]  Mark Lawson.  Building design using modules , 2007 .

[39]  Jin Y. Ooi,et al.  Numerical and experimental studies of the base pressures beneath stockpiles , 2011 .

[40]  Mohammed Hjiaj,et al.  Exact finite element model for shear-deformable two-layer beams with discrete shear connection , 2011 .

[41]  P. G. Howe,et al.  LONDON – VAN DER WAALS ATTRACTIVE FORCES BETWEEN GLASS SURFACES , 1955 .

[42]  R. M. Nedderman,et al.  Measurement of velocity profiles in conical hoppers , 1993 .

[43]  Jian Fei Chen,et al.  Finite element simulation of the pressure dip in sandpiles , 2013 .

[44]  Thorsten W. R. Keiter,et al.  Numerical Aspects of FE Simulations of Granular Flow in Silos , 2001 .

[45]  Andrea Dall'Asta,et al.  A geometric nonlinear model for composite beams with partial interaction , 2010 .

[46]  Mohammed Hjiaj,et al.  A space-exact beam element for time-dependent analysis of composite members with discrete shear connection , 2010 .

[47]  Pankaj,et al.  Investigation of Silo Honking: Slip-Stick Excitation and Wall Vibration , 2005 .

[48]  Songxiong Ding,et al.  Investigations of flow and pressure in silos during filling and discharging in presence of inserts , 2004 .

[49]  Jin Y. Ooi,et al.  Rarefaction wave propagation in tapered granular columns , 2012 .

[50]  Jacek Tejchman,et al.  Modeling of shear localization during confined granular flow in silos within non-local hypoplasticity , 2009 .

[51]  B. Derjaguin,et al.  Structural component of disjoining pressure , 1974 .

[52]  Christopher M. Wensrich,et al.  Experimental behaviour of quaking in tall silos , 2002 .

[53]  J. M. Rotter,et al.  Guide for the Economic Design of Circular Metal Silos , 2001 .