Influence of Ga and Ag on the KF Treatment Chemistry for CIGS Solar Cells

The KF postdeposition treatment (KF-PDT) is compared on Cu(In,Ga)Se2 (CIGS) and CuInSe2 (CIS), as well as Ag alloyed CIGS and CIS (ACIGS and ACIS), with the focus on surface chemistry and resulting device performance. Ga does not affect the surface K content; however, X-ray photoelectron spectroscopy shows a preferential reaction of F with Ga, in which CIGS+KF forms GaF3 and CIS+KF forms InF3. KF-treated devices have lower Cu and Ag concentration on the surface, but Cu is reduced more strongly than Ag. Films with Ga show a greater Cu and Ag reduction on the surface than CIS or ACIS. The KF-PDT improves CIS and CIGS device performance and allows for both CIS and CIGS to tolerate reduced CdS thicknesses. In ACIS and ACIGS, device performance decreases with KF, and the open-circuit voltage and fill factor loss is reduced with thinner CdS layers.

[1]  A. Lecours,et al.  Surface Studies of Laser Processing of W on GaAs from WF6 , 1991 .

[2]  D. N. Bose,et al.  Improved surface properties of InP through chemical treatments , 1991 .

[3]  M. Döbeli,et al.  Features of KF and NaF Postdeposition Treatments of Cu(In,Ga)Se2 Absorbers for High Efficiency Thin Film Solar Cells , 2015 .

[4]  C. Muzzillo.  Review of grain interior, grain boundary, and interface effects of K in CIGS solar cells: Mechanisms for performance enhancement , 2017 .

[5]  D. Zatko,et al.  Photoelectron and auger spectroscopy of indium halides, oxide and sulfide compounds , 1979 .

[6]  V. Bermudez.  Investigation of the initial chemisorption and reaction of fluorine (XeF2) with the GaN(0001)-(1 × 1) surface , 1997 .

[7]  Rong Chen,et al.  Phase diagram of KF–InF3 system , 2003 .

[8]  Nicholas Winograd,et al.  Initial and final state effects in the ESCA spectra of cadmium and silver oxides , 1977 .

[9]  Debora Keller,et al.  Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells. , 2013, Nature materials.

[10]  R. Menozzi,et al.  Alkali-templated surface nanopatterning of chalcogenide thin films: a novel approach toward solar cells with enhanced efficiency. , 2015, Nano letters.

[11]  Jinwoo Lee,et al.  Ag Alloying and KF Treatment Effects on Low Bandgap CuInSe2 Solar Cells , 2018, IEEE Journal of Photovoltaics.

[12]  L. Mansfield,et al.  Comparison of CIGS Solar Cells Made With Different Structures and Fabrication Techniques , 2017 .

[13]  S. Siebentritt,et al.  Potassium Fluoride Ex Situ Treatment on Both Cu-Rich and Cu-Poor CuInSe2 Thin Film Solar Cells , 2017, IEEE Journal of Photovoltaics.

[14]  P. McNamara,et al.  Devitrification theory and glass-forming phase diagrams of fluoride compositions , 2005, SPIE Micro + Nano Materials, Devices, and Applications.

[15]  T. Nakada,et al.  Comparative study of water and ammonia rinsing processes of potassium fluoride-treated Cu(In,Ga)Se2 thin film solar cells , 2017 .

[16]  Jinwoo Lee,et al.  The Comparison of (Ag,Cu)(In,Ga)Se$_{\bf 2}$ and Cu(In,Ga)Se$_{\bf 2}$ Thin Films Deposited by Three-Stage Coevaporation , 2014, IEEE Journal of Photovoltaics.

[17]  Jinwoo Lee,et al.  Ag Alloying and KF Treatment Effects on Low Bandgap CIGS Solar Cells , 2019, 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion (WCPEC) (A Joint Conference of 45th IEEE PVSC, 28th PVSEC & 34th EU PVSEC).

[18]  Jinwoo Lee,et al.  Secondary phase formation in (Ag,Cu)(In,Ga)Se 2 thin films grown by three-stage co-evaporation , 2017 .

[19]  L. Arzel,et al.  KF post deposition treatment in co‐evaporated Cu(In,Ga)Se2 thin film solar cells: Beneficial or detrimental effect induced by the absorber characteristics , 2017 .

[20]  Philip Jackson,et al.  Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6% , 2016 .

[21]  H. Sugimoto,et al.  From 20.9 to 22.3% Cu(In,Ga)(S,Se)2 solar cell: Reduced recombination rate at the heterojunction and the depletion region due to K-treatment , 2017 .

[22]  R. Bertoncello,et al.  Ion implantation effects in heavy metal fluoride glasses , 1990 .

[23]  J. Riga,et al.  High resolution esca study of uranium fluorides: UF4 and K2UF6 , 1977 .

[24]  L. Stolt,et al.  Secondary phase formation and surface modification from a high dose KF‐post deposition treatment of (Ag,Cu)(In,Ga)Se2 solar cell absorbers , 2018, Progress in Photovoltaics: Research and Applications.

[25]  R. Reedy,et al.  Enhanced Performance in Cu(In,Ga)Se$_{\bf 2}$ Solar Cells Fabricated by the Two-Step Selenization Process With a Potassium Fluoride Postdeposition Treatment , 2014, IEEE Journal of Photovoltaics.

[26]  Nina Shariati Nilsson,et al.  High Voc in (Cu,Ag)(In,Ga)Se2 Solar Cells , 2017, IEEE Journal of Photovoltaics.

[27]  Rommel Noufi,et al.  Optimization of CBD CdS process in high-efficiency Cu(In, Ga)Se2-based solar cells , 2002 .

[28]  P. Rodnyi.  Choice of Compounds with Fast Core-Valence Transitions , 1994 .

[29]  E. Handick,et al.  NaF/KF post-deposition treatments and their influence on the structure of Cu(In, Ga)Se2 absorber surfaces , 2016, 2016 IEEE 43rd Photovoltaic Specialists Conference (PVSC).

[30]  John R. Van Wazer,et al.  Inner-orbital photoelectron spectroscopy of the alkali metal halides, perchlorates, phosphates, and pyrophosphates , 1973 .

[31]  Jinwoo Lee,et al.  The electronic structure of Cu(In 1 - x Ga x)Se 2 alloyed with silver , 2011 .

[32]  S. Takagi,et al.  Study on Surface Modification of Indium Tin Oxide and Resist Surfaces Using CF4/O2 Plasma for Manufacturing Organic Light-Emitting Diodes by Inkjet Printing , 2008 .

[33]  V. G. Solomonik,et al.  Ab initio study of the molecular structure, isomerism, and vibrational spectra of MAF4. (M = Li, Na, K; A = Al, Ga) , 1999 .

[34]  Andreas Bauer,et al.  Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7% , 2015 .

[35]  Y. Kawamoto,et al.  F1s XPS of fluoride glasses and related fluoride crystals , 1999 .

[36]  Jinwoo Lee,et al.  Comparison of Ag and Ga alloying in low bandgap CuInSe2-based solar cells , 2019, Solar Energy Materials and Solar Cells.

[37]  T. Nakada,et al.  Effect of potassium fluoride post-deposition treatment on Cu(In,Ga)Se2 thin films and solar cells fabricated onto sodalime glass substrates , 2016 .

[38]  Takuya Kato,et al.  Record Efficiency for Thin-Film Polycrystalline Solar Cells Up to 22.9% Achieved by Cs-Treated Cu(In,Ga)(Se,S)2 , 2019, IEEE Journal of Photovoltaics.

[39]  D. Hariskos,et al.  A closer look at initial CdS growth on high-efficiency Cu(In,Ga)Se2 absorbers using surface-sensitive methods , 2016, 2017 IEEE 44th Photovoltaic Specialist Conference (PVSC).