Influence of the rotation speed on the effectiveness parameters of a desiccant wheel: An assessment using experimental data and manufacturer software

The effectiveness parameters of desiccant wheels depend on the variable operating conditions. Experimental data measured in an air handling unit equipped with a desiccant wheel and data provided by the manufacturer software are used in the present work to investigate the dependence of effectiveness parameters on the rotation speed. The air handling unit belongs to a test facility with a microcogeneration system. The regeneration airflow is heated up to moderate temperatures in the range 45–70 °C by using thermal energy produced by the microcogenerator and/or a boiler. The analysis of the results shows that i) the manufacturer software tends to underestimate the increase of process air temperature and to overestimate the dehumidification capability of the desiccant rotor compared to experimental data; and ii) the various investigated effectiveness parameters present different dependences on the rotation speed: monotonic dependence, a maximum value for an intermediate rotation speed, and a negligible dependence.

[1]  Vivek V. Ranade,et al.  Modeling of Rotary Desiccant Wheels , 2005 .

[2]  Carlo Roselli,et al.  Experimental investigation to optimise a desiccant HVAC system coupled to a small size cogenerator , 2011 .

[3]  Tianshu Ge,et al.  A mathematical model for predicting the performance of a compound desiccant wheel (A model of compound desiccant wheel) , 2010 .

[4]  Carlo Roselli,et al.  Desiccant wheel regenerated by thermal energy from a microcogenerator: Experimental assessment of the performances , 2011 .

[5]  Hassan Pahlavanzadeh,et al.  Introduction of a new definition for effectiveness of desiccant wheels , 2009 .

[6]  Carlo Roselli,et al.  Effect of rotational speed on the performances of a desiccant wheel , 2013 .

[7]  Carlos E. L. Nóbrega,et al.  A graphical procedure for desiccant cooling cycle design , 2011 .

[8]  A. E. Kabeel,et al.  Solar powered air conditioning system using rotary honeycomb desiccant wheel , 2007 .

[9]  José J. Costa,et al.  Effectiveness parameters for the prediction of the global performance of desiccant wheels – An assessment based on experimental data , 2012 .

[10]  Carlo Roselli,et al.  Experimental analysis on the dehumidification and thermal performance of a desiccant wheel , 2012 .

[11]  Li-Zhi Zhang,et al.  Energy performance of independent air dehumidification systems with energy recovery measures , 2005, Energy.

[12]  M. H. Ahmed,et al.  Evaluation and optimization of solar desiccant wheel performance , 2005 .

[13]  Giovanni Angrisani,et al.  The effectiveness method to predict the behaviour of a desiccant wheel: An attempt of experimental validation , 2014 .

[14]  Vassilis Belessiotis,et al.  Experimental validation of a simplified approach for a desiccant wheel model , 2010 .

[15]  Akio Kodama,et al.  The use of psychrometric charts for the optimisation of a thermal swing desiccant wheel , 2001 .

[16]  Vassilis Belessiotis,et al.  Theoretical and experimental investigation of the performance of a desiccant air-conditioning system , 2010 .

[17]  Alfonso Capozzoli,et al.  Hybrid HVAC systems with chemical dehumidification for supermarket applications , 2006 .

[18]  Antonio Carrillo-Andres,et al.  Exponential correlations to predict the dependence of effectiveness parameters of a desiccant wheel on the airflow rates and on the rotation speed , 2013 .

[19]  Ruzhu Wang,et al.  Development of a novel rotary desiccant cooling cycle with isothermal dehumidification and regenerative evaporative cooling using thermodynamic analysis method , 2012 .

[20]  Antonio Carrillo-Andres,et al.  Interpolation procedures for the effectiveness method to account for the influence of the inlet airflow states on the desiccant wheels performance , 2012 .

[21]  Stefano De Antonellis,et al.  Simulation, performance analysis and optimization of desiccant wheels , 2010 .

[22]  Tianshu Ge,et al.  Experimental investigation on a one-rotor two-stage rotary desiccant cooling system , 2008 .

[23]  Vassilis Belessiotis,et al.  Solid desiccant air-conditioning systems Design parameters , 2011 .

[24]  Jianlei Niu,et al.  Energy savings potential of chilled-ceiling combined with desiccant cooling in hot and humid climates , 2002 .

[25]  Ryuichiro Yoshie,et al.  Experimental heat and mass transfer of the separated and coupled rotating desiccant wheel and heat wheel , 2010 .

[26]  Carlo Roselli,et al.  Experimental validation of constant efficiency models for the subsystems of an unconventional desiccant-based Air Handling Unit and investigation of its performance , 2012 .

[27]  Carlo Roselli,et al.  Desiccant HVAC system driven by a micro-CHP: Experimental analysis , 2010 .

[28]  Antonio Carrillo-Andres,et al.  A new approach to the effectiveness method for the simulation of desiccant wheels with variable inlet states and airflows rates , 2013 .

[29]  José J. Costa,et al.  On the behaviour of hygroscopic wheels: Part I - channel modelling , 2007 .