The effect of pulsating pressure on the performance of a PEM fuel cell with a wavy cathode surface

In the context of attempts to improve the performance of Proton Exchange Membrane (PEM) fuel cells with a heterogeneous porous gas diffusion layer (GDL) consisting of carbon paper, we investigated whether - and to which degree - pulsating the pressure in a single waveform cathode channel affects the flow field in the channel and the performance of the fuel cell. In this 2-D study, the GDL was modeled by a stochastic arrangement of circular solid obstacles the macroscopic transport properties of which, such as permeability and tortuosity, were numerically simulated and found to compare favorably with experimental data. The focus of this paper is on the effects of varying amplitude and frequency of the pressure pulsations on cell performance. The results obtained show that a pulsating pressure enhances the convective species transport to the reaction sites and thereby increases cell performance. We found that in a waveform channel a pulsatile pressure with an amplitude as high as 0.7 times the pressure drop over the cathode channel improves the fuel cell performance by around 7%, while the effect of pulsation frequency on output power is marginally small only.

[1]  N. Kojima,et al.  Mass transfer enhancement in a symmetric sinusoidal wavy-walled channel for pulsatile flow , 1995 .

[2]  A. Tamayol,et al.  Transverse permeability of fibrous porous media. , 2011, Physical review. E, Statistical, nonlinear, and soft matter physics.

[3]  G. Molaeimanesh,et al.  Agglomerate modeling of cathode catalyst layer of a PEM fuel cell by the lattice Boltzmann method , 2015 .

[4]  Trung Van Nguyen,et al.  A Two-Dimensional, Two-Phase, Multicomponent, Transient Model for the Cathode of a Proton Exchange Membrane Fuel Cell Using Conventional Gas Distributors , 2001 .

[5]  Peter M. A. Sloot,et al.  Finite-Difference Lattice-BGK methods on nested grids , 2000 .

[6]  Liang Hao,et al.  Lattice Boltzmann simulations of water transport in gas diffusion layer of a polymer electrolyte membrane fuel cell , 2010 .

[7]  H.E.A. van den Akker,et al.  A multi-component two-phase lattice Boltzmann method applied to a 1-D Fischer–Tropsch reactor , 2012 .

[8]  T. Nishimura,et al.  Influence of imposed oscillatory frequency on mass transfer enhancement of grooved channels for pulsatile flow , 2000 .

[9]  Ralph E. White,et al.  A water and heat management model for proton-exchange-membrane fuel cells , 1993 .

[10]  M. Fowler,et al.  In-plane and through-plane gas permeability of carbon fiber electrode backing layers , 2006 .

[11]  Qinjun Kang,et al.  Lattice Boltzmann Method for Reacting Flows in Porous Media , 2010 .

[12]  Sassi Ben Nasrallah,et al.  Numerical simulation of droplet dynamics in a proton exchange membrane (PEMFC) fuel cell micro-channel , 2015 .

[13]  Xianguo Li,et al.  Application of lattice Boltzmann method to a micro-scale flow simulation in the porous electrode of a PEM fuel cell , 2007 .

[14]  Xianguo Li,et al.  Analytical approach to polymer electrolyte membrane fuel cell performance and optimization , 2007 .

[15]  O. Filippova,et al.  Boundary-Fitting and Local Grid Refinement for Lattice-BGK Models , 1998 .

[16]  Liang Hao,et al.  Lattice Boltzmann simulations of anisotropic permeabilities in carbon paper gas diffusion layers , 2009 .

[17]  J. Kuo,et al.  The effects of buoyancy on the performance of a PEM fuel cell with a wave-like gas flow channel design by numerical investigation , 2007 .

[18]  Min-Soo Kim,et al.  Enhanced diffusion in polymer electrolyte membrane fuel cells using oscillating flow , 2010 .

[19]  Yonghao Zhang,et al.  Multiscale lattice Boltzmann approach to modeling gas flows. , 2010, Physical review. E, Statistical, nonlinear, and soft matter physics.

[20]  B. R. Gebart,et al.  Permeability of Unidirectional Reinforcements for RTM , 1992 .

[21]  Z. H. Wang,et al.  Two-phase flow and transport in the air cathode of proton exchange membrane fuel cells , 2000 .

[22]  Shan,et al.  Lattice Boltzmann model for simulating flows with multiple phases and components. , 1993, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[23]  G. Molaeimanesh,et al.  A pore-scale model for the cathode electrode of a proton exchange membrane fuel cell by lattice Boltzmann method , 2015, Korean Journal of Chemical Engineering.

[24]  W. Tao,et al.  Three-dimensional transport model of PEM fuel cell with straight flow channels , 2006 .

[25]  G. Molaeimanesh,et al.  A three-dimensional pore-scale model of the cathode electrode in polymer-electrolyte membrane fuel cell by lattice Boltzmann method , 2014 .

[26]  Li Chen,et al.  Pore-scale simulation of coupled multiple physicochemical thermal processes in micro reactor for hydrogen production using lattice Boltzmann method , 2012 .

[27]  Qisu Zou,et al.  N ov 1 99 6 On pressure and velocity flow boundary conditions and bounceback for the lattice Boltzmann BGK model , 2008 .

[28]  M. A. Delavar,et al.  Numerical simulation of direct methanol fuel cells using lattice Boltzmann method , 2010 .

[29]  Frano Barbir,et al.  PEM Fuel Cells: Theory and Practice , 2012 .

[30]  Won-Yong Lee,et al.  Performance improvement of electrode for polymer electrolyte membrane fuel cell , 2002 .

[31]  Q. Zou,et al.  On pressure and velocity boundary conditions for the lattice Boltzmann BGK model , 1995, comp-gas/9611001.

[32]  Matthew M. Mench,et al.  Fuel Cell Engines , 2008 .

[33]  A. Kornyshev,et al.  Mechanisms of Proton Conductance in Polymer Electrolyte Membranes , 2001 .

[34]  A. Tamayol,et al.  Through-Plane Gas Permeability of Proton Exchange Membrane Fuel Cell Gas Diffusion Layers , 2011 .

[35]  Aimy Bazylak,et al.  Developing a new form of the Kozeny–Carman parameter for structured porous media through lattice-Boltzmann modeling , 2013 .

[36]  Jenn-Kun Kuo,et al.  Evaluating the enhanced performance of a novel wave-like form gas flow channel in the PEMFC using the field synergy principle , 2006 .

[37]  Nam Hyeon Choi,et al.  Simulation and experimental analysis on the performance of PEM fuel cell by the wave-like surface design at the cathode channel , 2014 .

[38]  Rui Chen,et al.  Nanotomography based study of gas diffusion layers , 2010 .

[39]  Jussi Timonen,et al.  Permeability and effective porosity of porous media , 1997 .

[40]  A. Louisa,et al.  コロイド混合体における有効力 空乏引力から集積斥力へ | 文献情報 | J-GLOBAL 科学技術総合リンクセンター , 2002 .

[41]  Li Chen,et al.  Pore-scale flow and mass transport in gas diffusion layer of proton exchange membrane fuel cell with interdigitated flow fields , 2012 .

[42]  Hua Meng,et al.  Numerical studies of interfacial phenomena in liquid water transport in polymer electrolyte membrane fuel cells using the lattice Boltzmann method , 2013 .

[43]  D. Chu,et al.  Performance of polymer electrolyte membrane fuel cell (PEMFC) stacks. Part I. Evaluation and simulation of an air-breathing PEMFC stack , 1999 .

[44]  Pierre R. Roberge,et al.  Development and application of a generalised steady-state electrochemical model for a PEM fuel cell , 2000 .

[45]  O. Filippova,et al.  Grid Refinement for Lattice-BGK Models , 1998 .

[46]  Jin Hyun Nam,et al.  Lattice Boltzmann simulation of liquid water transport in microporous and gas diffusion layers of polymer electrolyte membrane fuel cells , 2015 .

[47]  Jenn-Kun Kuo,et al.  Three-dimensional numerical analysis of PEM fuel cells with straight and wave-like gas flow fields channels , 2008 .

[48]  M. Abdollahzadeh,et al.  Influence of cathode flow pulsation on performance of proton exchange membrane fuel cell with interdigitated gas distributors , 2016 .

[49]  Shiyi Chen,et al.  LATTICE BOLTZMANN METHOD FOR FLUID FLOWS , 2001 .

[50]  M. H. Akbari,et al.  Impact of PTFE distribution on the removal of liquid water from a PEMFC electrode by lattice Boltzmann method , 2014 .

[51]  Wei Shyy,et al.  Force evaluation in the lattice Boltzmann method involving curved geometry. , 2002, Physical review. E, Statistical, nonlinear, and soft matter physics.

[52]  Peter Kuster,et al.  Principles Of Heat Transfer In Porous Media , 2016 .