The estimation of cutting force coefficients in milling of thin-walled parts using cutter with different tooth radii

The precise estimation of the cutting force coefficients in milling is very important, which has great impact on the precise calculation of the milling forces and the stability lobes of the system. On the basis of the imprecise estimation of cutting force coefficients in milling of thin-walled part using cutter with different tooth radii, the calculation process of actual cutting force coefficients is proposed in this article. First, based on the different amplitudes of milling forces caused by the long and short teeth of cutter, the nominal milling forces and nominal cutting force coefficients are constructed, and the radii error of the long and short teeth of cutter is calculated. Then, actual cutting force coefficients are derived based on radii error of cutter teeth. Finally, an experiment is performed to verify the validity of the calculation process of actual cutting force coefficients proposed in this article, and the results show that the actual cutting force coefficients obtained by consideration of radii error are more effective than theoretical cutting force coefficients obtained without consideration of radii error in the calculation of milling forces.

[1]  Li Hao,et al.  Analysis of cutting forces in helical milling of carbon fiber–reinforced plastics , 2013 .

[2]  Liu Qiang.  Study on the Identification of the Milling Force Parameter Model Based on Partial Least Square Regression and Application , 2005 .

[3]  Tony L. Schmitz,et al.  A closed form mechanistic cutting force model for helical peripheral milling of ductile metallic alloys , 2010 .

[4]  Moon-Chul Yoon,et al.  Cutting dynamic force modelling of endmilling operation , 2004 .

[5]  Klaus Weinert,et al.  Mechanistic identification of specific force coefficients for a general end mill , 2004 .

[6]  Richard E. DeVor,et al.  Estimation of the specific cutting pressures for mechanistic cutting force models , 2001 .

[7]  Shao-Hsien Chen,et al.  The prediction of cutting force in milling Inconel-718 , 2005 .

[8]  Jiang Cheng-yu,et al.  Study of the Classification of Cutting Forces and the Build of the Accurate Milling Force Model in End Milling , 2007 .

[9]  Matthew S. Dargusch,et al.  Experimental investigation of cutting forces and tool wear during laser-assisted milling of Ti-6Al-4V alloy , 2011 .

[10]  Jon Rigelsford,et al.  Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design , 2004 .

[11]  Chen Ming,et al.  Study on Cutting Force Coefficients in End Milling Die Steel 4Cr16Mo , 2009 .

[12]  Yung C. Shin,et al.  A new procedure to determine instantaneous cutting force coefficients for machining force prediction , 1997 .

[13]  Amauri Hassui,et al.  Analysis of the cutting forces in plunge milling , 2013 .

[14]  K. Jayakumar,et al.  An investigation of cutting force and tool–work interface temperature in milling of Al–SiCp metal matrix composite , 2013 .

[15]  Huaizhong Li,et al.  Assessment of cutting forces in high-speed milling of Inconel 718 considering the dynamic effects , 2013 .