Alkaline Stability of Anion-Exchange Membranes

Recently, the development of durable anion-exchange membrane fuel cells (AEMFCs) has increased in intensity due to their potential to use low-cost, sustainable components. However, the decomposition of the quaternary ammonium (QA) cationic groups in the anion-exchange membranes (AEMs) during cell operation is still a major challenge. Many different QA types and functionalized polymers have been proposed that achieve high AEM stabilities in strongly alkaline aqueous solutions. We previously developed an ex situ technique to measure AEM alkaline stabilities in an environment that simulates the low-hydration conditions in an operating AEMFC. However, this method required the AEMs to be soluble in DMSO solvent, so decomposition could be monitored using 1H nuclear magnetic resonance (NMR). We now report the extension of this ex situ protocol to spectroscopically measure the alkaline stability of insoluble AEMs. The stability ofradiation-grafted (RG) poly(ethylene-co-tetrafluoroethylene)-(ETFE)-based poly(vinylbenzyltrimethylammonium) (ETFE-TMA) and poly(vinylbenzyltriethylammonium) (ETFE-TEA) AEMs were studied using Raman spectroscopy alongside changes in their true OH– conductivities and ion-exchange capacities (IEC). A crosslinked polymer made from poly(styrene-co-vinylbenzyl chloride) random copolymer and N,N,N′,N′-tetraethyl-1,3-propanediamine (TEPDA) was also studied. The results are consistent with our previous studies based on QA-type model small molecules and soluble poly(2,6-dimethylphenylene oxide) (PPO) polymers. Our work presents a reliable ex situ technique to measure the true alkaline stability of AEMs for fuel cells and water electrolyzers.

[1]  Dario R. Dekel,et al.  Hydroxide Chemoselectivity Changes with Water Microsolvation. , 2022, The journal of physical chemistry letters.

[2]  M. Ishida,et al.  Water transport analysis during cathode dry operation of anion exchange membrane water electrolysis , 2022, International Journal of Hydrogen Energy.

[3]  Dario R. Dekel,et al.  Improving Alkaline Hydrogen Oxidation Activity of Palladium through Interactions with Transition-Metal Oxides , 2022, ACS Catalysis.

[4]  Yiyong Han,et al.  Water management in anion-exchange membrane water electrolyzers under dry cathode operation , 2022, RSC advances.

[5]  F. C. Fonseca,et al.  Enhancing the Durability and Performance of Radiation-Induced Grafted Low-Density Polyethylene-Based Anion-Exchange Membranes by Controlling Irradiation Conditions , 2022, SSRN Electronic Journal.

[6]  M. Zachman,et al.  Understanding Recoverable vs Unrecoverable Voltage Losses and Long-Term Degradation Mechanisms in Anion Exchange Membrane Fuel Cells , 2022, ACS Catalysis.

[7]  Dario R. Dekel,et al.  Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments , 2022, Chemical Society reviews.

[8]  Dario R. Dekel,et al.  Isoindolinium Groups as Stable Anion Conductors for Anion-Exchange Membrane Fuel Cells and Electrolyzers , 2022, ACS materials Au.

[9]  Dario R. Dekel,et al.  Magnetic-field-oriented mixed-valence-stabilized ferrocenium anion-exchange membranes for fuel cells , 2022, Nature Energy.

[10]  Jeremy L. Hitt,et al.  Electrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies. , 2022, Chemical reviews.

[11]  Dario R. Dekel,et al.  Measuring the alkaline stability of anion-exchange membranes , 2022, Journal of Electroanalytical Chemistry.

[12]  Dario R. Dekel,et al.  Recent developments in Pd-CeO2 nano-composite electrocatalysts for anodic reactions in anion exchange membrane fuel cells , 2022, Electrochemistry Communications.

[13]  Dario R. Dekel,et al.  High-performance radiation grafted anion-exchange membranes for fuel cell applications: Effects of irradiation conditions on ETFE-based membranes properties , 2022, Journal of Membrane Science.

[14]  P. Jannasch,et al.  Poly(fluorene alkylene) Anion Exchange Membranes with Pendant Spirocyclic and Bis-Spirocyclic Quaternary Ammonium Cations , 2021, ACS Applied Energy Materials.

[15]  Dario R. Dekel,et al.  Alkaline Stability of Low Oxophilicity Metallopolymer Anion-Exchange Membranes. , 2021, Chemistry.

[16]  Dario R. Dekel,et al.  Understanding how single-atom site density drives the performance and durability of PGM-free Fe–N–C cathodes in anion exchange membrane fuel cells , 2021, Materials Today Advances.

[17]  Dario R. Dekel,et al.  A surprising relation between operating temperature and stability of anion exchange membrane fuel cells , 2021 .

[18]  Dario R. Dekel,et al.  Ligand Valency Effects on the Alkaline Stability of Metallopolymer Anion‐Exchange Membranes , 2021, Macromolecular rapid communications.

[19]  D. Jeyakumar,et al.  Shape-tuned, surface-active and support-free silver oxygen reduction electrocatalyst enabled high performance fully non-PGM alkaline fuel cell , 2021, RSC advances.

[20]  M. Guiver,et al.  Progress in High‐Performance Anion Exchange Membranes Based on the Design of Stable Cations for Alkaline Fuel Cells , 2021, Advanced Materials Technologies.

[21]  Dario R. Dekel,et al.  An Anion‐Exchange Membrane Fuel Cell Containing Only Abundant and Affordable Materials , 2021, Energy Technology.

[22]  Y. Lee,et al.  Anion exchange polyelectrolytes for membranes and ionomers , 2021 .

[23]  S. Adhikari,et al.  Ionomers for electrochemical energy conversion & storage technologies , 2020 .

[24]  Dario R. Dekel,et al.  Increasing the Alkaline Stability of N,N-Diaryl Carbazolium Salts Using Substituent Electronic Effects , 2020, ACS applied materials & interfaces.

[25]  S. Yoon,et al.  Poly(carbazole)-based anion-conducting materials with high performance and durability for energy conversion devices , 2020 .

[26]  F. Speck,et al.  High Performance FeNC and Mn-oxide/FeNC Layers for AEMFC Cathodes , 2020, Journal of The Electrochemical Society.

[27]  P. Kohl,et al.  Poly(norbornene) anion conductive membranes: homopolymer, block copolymer and random copolymer properties and performance , 2020, Journal of Materials Chemistry A.

[28]  Dario R. Dekel,et al.  Unexpected hydroxide ion structure and properties at low hydration , 2020 .

[29]  Dario R. Dekel,et al.  A high-temperature anion-exchange membrane fuel cell , 2020, Journal of Power Sources Advances.

[30]  Dario R. Dekel,et al.  Measuring the true hydroxide conductivity of anion exchange membranes , 2020 .

[31]  Cy H. Fujimoto,et al.  Highly quaternized polystyrene ionomers for high performance anion exchange membrane water electrolysers , 2020 .

[32]  Susan D. Arco,et al.  Density functional theory study on the degradation of fuel cell anion exchange membranes via removal of vinylbenzyl quaternary ammonium head group , 2020 .

[33]  Dario R. Dekel,et al.  Practical ex-Situ Technique To Measure the Chemical Stability of Anion-Exchange Membranes under Conditions Simulating the Fuel Cell Environment , 2020, ACS materials letters.

[34]  G. Coates,et al.  Alkaline-stable anion exchange membranes: A review of synthetic approaches , 2020 .

[35]  S. Adhikari,et al.  Molecular Engineering of Hydroxide Conducting Polymers for Anion Exchange Membranes in Electrochemical Energy Conversion Technology. , 2019, Accounts of chemical research.

[36]  P. Kohl,et al.  Composite Poly(norbornene) Anion Conducting Membranes for Achieving Durability, Water Management and High Power (3.4 W/cm2) in Hydrogen/Oxygen Alkaline Fuel Cells , 2019, Journal of The Electrochemical Society.

[37]  Dario R. Dekel,et al.  Poly(bis-arylimidazoliums) possessing high hydroxide ion exchange capacity and high alkaline stability , 2019, Nature Communications.

[38]  G. Tew,et al.  High Performance Anion Exchange Membrane Fuel Cells Enabled by Fluoropoly(olefin) Membranes , 2019, Advanced Functional Materials.

[39]  W. Mustain,et al.  Radiation-grafted anion-exchange membranes: the switch from low- to high-density polyethylene leads to remarkably enhanced fuel cell performance , 2019, Energy & Environmental Science.

[40]  Yan Shi,et al.  Piperidinium-functionalized anion exchange membranes and their application in alkaline fuel cells and water electrolysis , 2019, Journal of Materials Chemistry A.

[41]  P. Kohl,et al.  Highly Conductive Anion-Exchange Membranes Based on Cross-Linked Poly(norbornene): Vinyl Addition Polymerization , 2019, ACS Applied Energy Materials.

[42]  W. Mustain,et al.  Nitrogen‐doped Carbon–CoO x Nanohybrids: A Precious Metal Free Cathode that Exceeds 1.0 W cm −2 Peak Power and 100 h Life in Anion‐Exchange Membrane Fuel Cells , 2018, Angewandte Chemie.

[43]  Dario R. Dekel,et al.  Chemical stability of poly(phenylene oxide)-based ionomers in an anion exchange-membrane fuel cell environment , 2018 .

[44]  Dario R. Dekel,et al.  Beyond 1.0 W cm −2 Performance without Platinum: The Beginning of a New Era in Anion Exchange Membrane Fuel Cells , 2018 .

[45]  J. Varcoe,et al.  A high conductivity ultrathin anion-exchange membrane with 500+ h alkali stability for use in alkaline membrane fuel cells that can achieve 2 W cm−2 at 80 °C , 2018 .

[46]  Dario R. Dekel,et al.  Water Uptake Study of Anion Exchange Membranes , 2018 .

[47]  Dario R. Dekel,et al.  A practical method for measuring the true hydroxide conductivity of anion exchange membranes , 2018 .

[48]  Dario R. Dekel,et al.  The critical relation between chemical stability of cations and water in anion exchange membrane fuel cells environment , 2018 .

[49]  Dario R. Dekel.  Review of cell performance in anion exchange membrane fuel cells , 2018 .

[50]  P. Jannasch,et al.  A practical method for measuring the ion exchange capacity decrease of hydroxide exchange membranes during intrinsic degradation , 2018 .

[51]  Dario R. Dekel,et al.  Steady state and transient simulation of anion exchange membrane fuel cells , 2018 .

[52]  Zhe Sun,et al.  Anion-Exchange Membranes for Alkaline Fuel-Cell Applications: The Effects of Cations. , 2018, ChemSusChem.

[53]  A. Herring,et al.  Non-fluorinated pre-irradiation-grafted (peroxidated) LDPE-based anion-exchange membranes with high performance and stability , 2017 .

[54]  R. Makuška,et al.  Synthesis and self-assembly of polystyrene-based diblock and triblock coil–brush copolymers , 2017 .

[55]  Dario R. Dekel,et al.  Effect of Water on the Stability of Quaternary Ammonium Groups for Anion Exchange Membrane Fuel Cell Applications , 2017 .

[56]  Himanshu N. Sarode,et al.  High performance aliphatic-heterocyclic benzyl-quaternary ammonium radiation-grafted anion-exchange membranes , 2016 .

[57]  W. Mustain,et al.  An optimised synthesis of high performance radiation-grafted anion-exchange membranes , 2016 .

[58]  Timothy J. Peckham,et al.  Simultaneous, Synergistic Control of Ion Exchange Capacity and Cross-Linking of Sterically-Protected Poly(benzimidazolium)s , 2016 .

[59]  T. Yamaguchi,et al.  Ether cleavage-triggered degradation of benzyl alkylammonium cations for polyethersulfone anion exchange membranes. , 2016, Physical chemistry chemical physics : PCCP.

[60]  Y. Elabd,et al.  Alkaline Chemical Stability of Polymerized Ionic Liquids with Various Cations , 2015 .

[61]  G. Coates,et al.  Imidazolium Cations with Exceptional Alkaline Stability: A Systematic Study of Structure-Stability Relationships. , 2015, Journal of the American Chemical Society.

[62]  K. Kreuer,et al.  Alkaline stability of quaternary ammonium cations for alkaline fuel cell membranes and ionic liquids. , 2015, ChemSusChem.

[63]  Himanshu N. Sarode,et al.  Interplay between water uptake, ion interactions, and conductivity in an e-beam grafted poly(ethylene-co-tetrafluoroethylene) anion exchange membrane. , 2015, Physical chemistry chemical physics : PCCP.

[64]  Chulsung Bae,et al.  Mechanistic analysis of ammonium cation stability for alkaline exchange membrane fuel cells , 2014 .

[65]  Youyong Li,et al.  Effects of substituents and substitution positions on alkaline stability of imidazolium cations and their corresponding anion-exchange membranes. , 2014, ACS applied materials & interfaces.

[66]  L. Gubler.  Polymer Design Strategies for Radiation‐Grafted Fuel Cell Membranes , 2014 .

[67]  Youyong Li,et al.  Highly Stable N3-Substituted Imidazolium-Based Alkaline Anion Exchange Membranes: Experimental Studies and Theoretical Calculations , 2014 .

[68]  L. Pratt,et al.  Stability of Cations for Anion Exchange Membrane Fuel Cells , 2007 .

[69]  Gordon K. Hamer,et al.  Narrow molecular weight resins by a free-radical polymerization process , 1993 .