Micromachined Hot-Wire Thermal Conductivity Probe for Biomedical Applications

This paper presents the design, fabrication, numerical simulation, and experimental validation of a micromachined probe that measures thermal conductivity of biological tissues. The probe consists of a pair of resistive line heating elements and resistance temperature detector sensors, which were fabricated by using planar photolithography on a glass substrate. The numerical analysis revealed that the thermal conductivity and diffusivity can be determined by the temperature response induced by the uniform heat flux in the heating elements. After calibrating the probe using a material (agar gel) of known thermal conductivity, the probe was deployed to calculate the thermal conductivity of Crisco. The measured value is in agreement with that determined by the macro-hot-wire probe method to within 3%. Finally, the micro thermal probe was used to investigate the change of thermal conductivity of pig liver before and after RF ablation treatment. The results show an increase in thermal conductivity of liver after the RF ablation.

[1]  J A Pearce,et al.  A self-heated thermistor technique to measure effective thermal properties from the tissue surface. , 1987, Journal of biomechanical engineering.

[2]  H. F. Bowman,et al.  The simultaneous measurement of thermal conductivity, thermal diffusivity, and perfusion in small volumes of tissue. , 1984, Journal of biomechanical engineering.

[3]  V. Lysenko,et al.  Thick oxidised porous silicon layers for the design of a biomedical thermal conductivity microsensor , 1999 .

[4]  Francis A. Duck,et al.  Physical properties of tissue : a comprehensive reference book , 1990 .

[5]  H. F. Bowman,et al.  Thermal Conductivity and Thermal Diffusivity of Biomaterials: A Simultaneous Measurement Technique , 1977 .

[6]  E. D. Sloan,et al.  A computer-controlled transient needle-probe thermal conductivity instrument for liquids , 1986 .

[7]  S. Goldberg,et al.  Characterization of the RF ablation-induced ‘oven effect’: The importance of background tissue thermal conductivity on tissue heating , 2006, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[8]  Kenneth R. Diller,et al.  Heat Transfer in Living Systems: Current Opportunities , 1998 .

[9]  X G Liang,et al.  A convenient method of measuring the thermal conductivity of biological tissue. , 1991, Physics in medicine and biology.

[10]  R B Roemer,et al.  Engineering aspects of hyperthermia therapy. , 1999, Annual review of biomedical engineering.

[11]  Ming Yi,et al.  A novel microthermal probe for the measurement of perfusion , 2009, BiOS.

[12]  J. Chato.  A method for the measurement of the thermal properties of biological materials. , 1968 .

[13]  Y. Jaluria,et al.  An Introduction to Heat Transfer , 1950 .

[14]  Ming Yi,et al.  Micromachined Hot-Wire Thermal Conductivity Probe for Biomedical Applications , 2007, IEEE Transactions on Biomedical Engineering.

[15]  F. Kreith,et al.  Principles of heat transfer , 1962 .

[16]  P. Andersson,et al.  Thermal conductivity of solids under pressure by the transient hot wire method , 1976 .

[17]  J. C. Jaeger,et al.  Conduction of Heat in Solids , 1952 .

[18]  J. W. Valvano,et al.  Thermal conductivity and diffusivity of arterial wall and atherosclerotic plaque , 1987 .

[19]  Jonathan W. Valvano,et al.  Thermal conductivity and diffusivity of biomaterials measured with self-heated thermistors , 1985 .

[20]  Hong Cao,et al.  Measurement of directional thermal properties of biomaterials , 2001, IEEE Transactions on Biomedical Engineering.

[21]  R L Mahajan,et al.  Temperature dependence of thermal conductivity of biological tissues , 2003, Physiological measurement.