Model-based controllers for indoor climate control in office buildings – Complexity and performance evaluation

Model-based controllers are equipped with an integrated control model and utilize information about disturbances that act on the process. It is well established that the performance of building automation systems can be drastically improved by model-based controllers, but, they also lead to a substantial increase of complexity which is an obstacle for large scale implementation. In this work, model-based controllers with different measured disturbances as exogenous inputs and different types of control models were evaluated to explore the possibility of reducing complexity without compromising performance. The work was performed in a simulated environment and focuses on temperature and CO2 concentration control in individual office rooms during periods that are dominated by occupancy. All relevant internal and external disturbances in office environments were considered as both single input and combined inputs to six different control models. The key finding is that controllers with simplified control models and fewer exogenous inputs can perform almost as well as more complex controllers.

[1]  Elias B. Kosmatopoulos,et al.  A roadmap towards intelligent net zero- and positive-energy buildings , 2011 .

[2]  Prabir Barooah,et al.  Occupancy-based zone-climate control for energy-efficient buildings: Complexity vs. performance , 2013 .

[3]  M. Kintner-Meyer,et al.  Optimal control of an HVAC system using cold storage and building thermal capacitance , 1995 .

[4]  Benjamin Paris,et al.  Heating control schemes for energy management in buildings , 2010 .

[5]  Frauke Oldewurtel,et al.  Experimental analysis of model predictive control for an energy efficient building heating system , 2011 .

[6]  Filip Kulic,et al.  HVAC system optimization with CO2 concentration control using genetic algorithms , 2009 .

[7]  Chi-Chuan Wang,et al.  An airside correlation for plain fin-and-tube heat exchangers in wet conditions , 2000 .

[8]  Bjørn R. Sørensen.  Applications and energy consumption of demand controlled ventilation systems : modelling, simulation and implementation of modular builtdynamical VAV systems and control strategies , 2002 .

[9]  Shengwei Wang,et al.  A model-based optimal ventilation control strategy of multi-zone VAV air-conditioning systems , 2009 .

[10]  James E. Braun,et al.  A methodology for estimating occupant CO2 source generation rates from measurements in small commercial buildings , 2007 .

[11]  O. G. Martynenko,et al.  Handbook of hydraulic resistance , 1986 .

[12]  Manfred Morari,et al.  Importance of occupancy information for building climate control , 2013 .

[13]  Shengwei Wang,et al.  Experimental Validation of CO2-Based Occupancy Detection for Demand-Controlled Ventilation , 1999 .

[14]  Francisco Rodríguez,et al.  A comparison of thermal comfort predictive control strategies , 2011 .

[15]  Mats Sandberg,et al.  Air Movements through Horizontal Openings in Buildings - A Model Study , 2004 .

[16]  Tao Lu,et al.  A novel and dynamic demand-controlled ventilation strategy for CO2 control and energy saving in buildings , 2011 .

[17]  Petru-Daniel Morosan,et al.  Building temperature regulation using a distributed model predictive control , 2010 .

[18]  Manfred Morari,et al.  Use of model predictive control and weather forecasts for energy efficient building climate control , 2012 .

[19]  Lukas Ferkl,et al.  Model predictive control of a building heating system: The first experience , 2011 .

[20]  Douglas C. Hittle,et al.  An Experimental System for Advanced Heating, Ventilating and Air Conditioning (HVAC) Control , 2007 .

[21]  Bo Fan,et al.  Evaluation of four control strategies for building VAV air-conditioning systems , 2011 .