论文信息 - 12th GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT, GCMM 2014 Process capability analysis and optimization in WEDM of commerci ally pure titanium

12th GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT, GCMM 2014 Process capability analysis and optimization in WEDM of commerci ally pure titanium

In this research , input parameters such as pulse on time (T ON ), pulse off time (T OFF), peak current (IP), wire feed (WF), wire tension (WT), and servo voltage (SV) has been selected for process capability investigation in WEDM process. The process capability index was evaluated for machining characteristics such as machined work-piece dimension (MWD) and surface roughness (SR). Taguchi’s approach to experiment design and analysis was utilized to study the influence of machining parameters on the process capability index. Single response optimization was performed for both machining characteristics to find out the parametric setting which could optimize WEDM process capability. Surface integrity aspects s uch as micr ostructure analysis (including, debris, cracks, and crater size etc.) of the selected machined titanium samples have also been investigated.

Jatinder Kumar | Rupesh Chalisgaonkar

[1] Jatinder Kumar,et al. Optimization of WEDM process of pure titanium with multiple performance characteristics using Taguchi’s DOE approach and utility concept , 2013 .

[2] Xiaoping Li,et al. Study of the surface integrity of the machined workpiece in the EDM of tungsten carbide , 2003 .

[3] Jatinder Kumar,et al. Multi-response optimization of process parameters based on response surface methodology for pure titanium using WEDM process , 2013, The International Journal of Advanced Manufacturing Technology.

[4] R. M. Belokar,et al. Improving the Process Capability of a Boring Operation by the Application of Statistical Techniques , 2012 .

[5] Sandeep Grover,et al. Simultaneous optimization of material removal rate and surface roughness for WEDM of WC-Co composite using grey relational analysis along with Taguchi method , 2011 .

[6] R. Ramakrishnan,et al. Modeling and multi-response optimization of Inconel 718 on machining of CNC WEDM process , 2008 .

[7] Amar Patnaik,et al. Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method , 2007 .

[8] Amar Patnaik,et al. Parametric optimization of wire electrical discharge machining (WEDM) process using taguchi method , 2006 .