Assessment and monitoring of foliage projected cover and canopy height across native vegetation in Queensland, Australia, using laser profiler data

The aim of this project was to demonstrate the potential of laser profiling for monitoring forest structure. Data were captured from flights at 30, 60, and 100 m above the canopy over three study sites in south-east Queensland at regular intervals over a 2-year period. Field measurements of foliage projected cover (FPC) and tree height were found to be highly correlated with laser derived estimates (R2 from 0.91 to 0.95). Monitoring of changes in FPC and tree height, as a result of logging or growth, was also successful. Tree heights, in particular, were measured accurately over time (residual standard error (RSE) of 0.45 m). The large RSE of the FPC model (from 5.7% to 7.3% FPC) means that subtle changes, such as seasonal variation, may be difficult to monitor. Flying height was found to be a significant explanatory variable in estimating field FPC. A transect of greater than 1000 km was also flown in a single helicopter pass to assess the technology over a range of forest types. Field measurements of FPC were collected for 21 sites along this transect. Strong relationships were observed between laser and field FPC, but these varied with forest type.

[1]  J. Wilson,et al.  INCLINED POINT QUADRATS , 1960 .

[2]  Jw Wilson.  Estimation of foliage denseness and foliage angle by inclined point quadrats , 1963 .

[3]  F. James Rohlf,et al.  Biometry: The Principles and Practice of Statistics in Biological Research , 1969 .

[4]  R. Nelson,et al.  Determining forest canopy characteristics using airborne laser data , 1984 .

[5]  W. Krabill,et al.  Gross-merchantable timber volume estimation using an airborne lidar system , 1986 .

[6]  S. T. Gower,et al.  Rapid Estimation of Leaf Area Index in Conifer and Broad-Leaf Plantations , 1991 .

[7]  James H. Everitt,et al.  MEASURING CANOPY STRUCTURE WITH AN AIRBORNE LASER ALTIMETER , 1993 .

[8]  Jerry C. Ritchie,et al.  Comparison of laser and field measurements of vegetation height and canopy cover , 1994 .

[9]  P. Catling,et al.  Studies of the ground-dwelling mammals of eucalypt forests in South-eastern New South Wales : the effect of habitat variables on distribution and abundance , 1995 .

[10]  M. Nilsson.  Estimation of tree heights and stand volume using an airborne lidar system , 1996 .

[11]  P. Stenberg,et al.  Response of LAI-2000 estimates to changes in plant surface area index in a Scots pine stand. , 1996, Tree physiology.

[12]  Ross Ihaka,et al.  Gentleman R: R: A language for data analysis and graphics , 1996 .

[13]  M. G. Ryan,et al.  Foliage, fine-root, woody-tissue and stand respiration in Pinus radiata in relation to nitrogen status. , 1996, Tree physiology.

[14]  Robert G. Wagner,et al.  Use of remote sensing for forest vegetation management: A problem analysis , 1997 .

[15]  R. G. Oderwald,et al.  Separating the ground and airborne laser sampling phases to estimate tropical forest basal area, volume, and biomass , 1997 .

[16]  M. Battaglia,et al.  Prediction of leaf area index in eucalypt plantations: effects of water stress and temperature , 1998 .

[17]  R. Fensham,et al.  Estimating Clearance of Acacia-dominated Ecosystems in Central Queensland Using Land-system Mapping Data , 1998 .

[18]  S. Magnussen,et al.  Derivations of stand heights from airborne laser scanner data with canopy-based quantile estimators , 1998 .

[19]  Cheryl A. Kuhnell,et al.  Mapping Woody Vegetation Cover over the State of Queensland using Landsat TM Imagery , 1998 .

[20]  J. Means.  Use of Large-Footprint Scanning Airborne Lidar To Estimate Forest Stand Characteristics in the Western Cascades of Oregon , 1999 .

[21]  Steen Magnussen,et al.  Recovering Tree Heights from Airborne Laser Scanner Data , 1999, Forest Science.

[22]  B. M. Goulevitch,et al.  The Statewide Landcover and Trees Study (SLATS) monitoring land cover change and greenhouse gas emissions in Queensland , 1999, IEEE 1999 International Geoscience and Remote Sensing Symposium. IGARSS'99 (Cat. No.99CH36293).

[23]  W. Cohen,et al.  Lidar Remote Sensing of the Canopy Structure and Biophysical Properties of Douglas-Fir Western Hemlock Forests , 1999 .

[24]  J. Means,et al.  Predicting forest stand characteristics with airborne scanning lidar , 2000 .

[25]  M. Cherry,et al.  Calibrating the LI-COR LAI-2000 for estimating leaf area index in eucalypt plantations , 2000 .

[26]  William E. Winner,et al.  Leaf area index of an old-growth Douglas-fir forest estimated from direct structural measurements in the canopy , 2000 .

[27]  Martin Flood,et al.  Laser altimetry : From science to commercial lidar mapping , 2001 .

[28]  M. Lefsky,et al.  Laser altimeter canopy height profiles: methods and validation for closed-canopy, broadleaf forests , 2001 .

[29]  Ronald L. Plaster.  LIDAR: TRANSITIONING TECHNOLOGIES FROM LAB TO APPLICATIONS AROUND THE GLOBE , 2001 .

[30]  E. Næsset,et al.  Estimating tree heights and number of stems in young forest stands using airborne laser scanner data , 2001 .

[31]  Scott D. Roberts,et al.  Detection of regularly spaced targets in small-footprint LIDAR data: Research issues for consideration , 2001 .

[32]  R. Dubayah,et al.  Estimation of tropical forest structural characteristics using large-footprint lidar , 2002 .

[33]  R. Dubayah,et al.  Sensitivity of large-footprint lidar to canopy structure and biomass in a neotropical rainforest , 2002 .

[34]  W. Cohen,et al.  Lidar Remote Sensing for Ecosystem Studies , 2002 .

[35]  E. Næsset.  Predicting forest stand characteristics with airborne scanning laser using a practical two-stage procedure and field data , 2002 .

[36]  E. Næsset,et al.  Estimating tree height and tree crown properties using airborne scanning laser in a boreal nature reserve , 2002 .

[37]  H. Lee Allen,et al.  Direct and indirect estimates of Leaf Area Index (LAI) for lodgepole and loblolly pine stands , 2006, Trees.