Enhanced Molecular Packing of a Conjugated Polymer with High Organic Thermoelectric Power Factor.

The detailed relationship between film morphology and the performance of solution processed n-type organic thermoelectric (TE) devices is investigated. It is interesting to find that the better ordered molecular packing of n-type polymer can be achieved by adding a small fraction of dopant molecules, which is not observed before. The better ordered structure will be favorable for the charge carrier mobility. Meanwhile, dopant molecules improve free carrier concentration via doping reaction. As a result, a significantly enhanced electrical conductivity (12 S cm(-1)) and power factor (25.5 μW m(-1) K(-2)) of TE devices are obtained. Furthermore, the phase separation of conjugated polymer/dopants is observed for the first time with resonant soft X-ray scattering. Our results indicate that the miscibility of conjugated polymers and dopants plays an important role on controlling the morphology and doping efficiency of TE devices.

[1]  Daoben Zhu,et al.  Toward High Performance n-Type Thermoelectric Materials by Rational Modification of BDPPV Backbones. , 2015, Journal of the American Chemical Society.

[2]  A. Sehirlioglu,et al.  Polymer composites for thermoelectric applications. , 2015, Angewandte Chemie.

[3]  M. Chabinyc,et al.  Impact of the Doping Method on Conductivity and Thermopower in Semiconducting Polythiophenes , 2015 .

[4]  He Yan,et al.  Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells , 2014, Nature Communications.

[5]  W. Xu,et al.  Organic Thermoelectric Materials: Emerging Green Energy Materials Converting Heat to Electricity Directly and Efficiently , 2014, Advanced materials.

[6]  M. Toney,et al.  Molecular Interactions and Ordering in Electrically Doped Polymers: Blends of PBTTT and F4TCNQ , 2014 .

[7]  G. Bazan,et al.  Side-chain effects on the conductivity, morphology, and thermoelectric properties of self-doped narrow-band-gap conjugated polyelectrolytes. , 2014, Journal of the American Chemical Society.

[8]  H. Ade,et al.  Quantification of Nano‐ and Mesoscale Phase Separation and Relation to Donor and Acceptor Quantum Efficiency, Jsc, and FF in Polymer:Fullerene Solar Cells , 2014, Advanced materials.

[9]  S. Mannsfeld,et al.  High Performance All‐Polymer Solar Cell via Polymer Side‐Chain Engineering , 2014, Advanced materials.

[10]  C. Hawker,et al.  Solubility‐Limited Extrinsic n‐Type Doping of a High Electron Mobility Polymer for Thermoelectric Applications , 2014, Advanced materials.

[11]  Z. Bao,et al.  Mechanistic study on the solution-phase n-doping of 1,3-dimethyl-2-aryl-2,3-dihydro-1H-benzoimidazole derivatives. , 2013, Journal of the American Chemical Society.

[12]  H. Ade,et al.  Competition between morphological attributes in the thermal annealing and additive processing of polymer solar cells , 2013 .

[13]  K. Pipe,et al.  Engineered doping of organic semiconductors for enhanced thermoelectric efficiency. , 2013, Nature materials.

[14]  John R. Tumbleston,et al.  Domain Purity, Miscibility, and Molecular Orientation at Donor/Acceptor Interfaces in High Performance Organic Solar Cells: Paths to Further Improvement , 2013 .

[15]  Long Ye,et al.  Molecular design toward efficient polymer solar cells with high polymer content. , 2013, Journal of the American Chemical Society.

[16]  Erin Antono,et al.  The chemical and structural origin of efficient p-type doping in P3HT , 2013 .

[17]  Daoben Zhu,et al.  Thermoelectric energy from flexible P3HT films doped with a ferric salt of triflimide anions , 2012 .

[18]  X. Crispin,et al.  Towards polymer-based organic thermoelectric generators , 2012 .

[19]  N. Koch,et al.  Fluorinated copolymer PCPDTBT with enhanced open-circuit voltage and reduced recombination for highly efficient polymer solar cells. , 2012, Journal of the American Chemical Society.

[20]  Feng Liu,et al.  On the morphology of polymer‐based photovoltaics , 2012 .

[21]  H. Katz,et al.  Prospects for polymer-based thermoelectrics: state of the art and theoretical analysis , 2012 .

[22]  B. Collins,et al.  Polarized X-ray scattering reveals non-crystalline orientational ordering in organic films. , 2012, Nature materials.

[23]  A. Hexemer,et al.  Soft x-ray scattering facility at the Advanced Light Source with real-time data processing and analysis. , 2012, The Review of scientific instruments.

[24]  B. Collins,et al.  Correlating the efficiency and nanomorphology of polymer blend solar cells utilizing resonant soft X-ray scattering. , 2012, ACS nano.

[25]  Wei Zhao,et al.  Defining the nanostructured morphology of triblock copolymers using resonant soft X-ray scattering. , 2011, Nano letters.

[26]  X. Crispin,et al.  Optimization of the thermoelectric figure of merit in the conducting polymer poly(3,4-ethylenedioxythiophene). , 2011, Nature materials.

[27]  Howard A. Padmore,et al.  A SAXS/WAXS/GISAXS Beamline with Multilayer Monochromator , 2010 .

[28]  F. E. Karasz,et al.  Crystalline phases of electrically conductive poly(p‐phenylene vinylene) , 1989 .

[29]  G. G. Miller,et al.  Structure of polyacetylene–iodine complexes , 1988 .

[30]  John R. Tumbleston,et al.  Absolute Measurement of Domain Composition and Nanoscale Size Distribution Explains Performance in PTB7:PC71BM Solar Cells , 2013 .