High quality biofuel pellet production from pre-compacted low density raw materials.

In this study, pre-compaction was evaluated as a method to enhance stable reed canary grass pellet production. An experimental design of the factors raw material moisture content, steam addition, raw material bulk density, and die temperature was used to find production conditions for high quality pellets by multiple linear regression modelling of responses. Response variables being modelled were variability of pelletizer current (as a measurement of uneven production), pellet bulk density, and pellet durability. By pre-compacting the raw material from a bulk density of 150 kg/m3 to 270kg/m3, continuous production could be obtained at minimum raw material moisture content of 13.8%. Bulk density and durability were both highly correlated to raw material moisture content, but showed different optima. Multiple response optimization was used to target process settings for production of high quality reed canary grass pellets with bulk density >650kg/m3 and durability >97.5%.

[1]  S. Sokhansanj,et al.  Effects of compressive force, particle size and moisture content on mechanical properties of biomass pellets from grasses , 2006 .

[2]  M. J. O'Dogherty,et al.  Compression of straw to high densities in closed cylindrical dies , 1984 .

[3]  A.F.B. van der Poel,et al.  Physical quality of pelleted animal feed. 2. contribution of processes and its conditions , 1997 .

[4]  R. Löwe,et al.  Influence of temperature on wafering in a continuous extrusion process , 1977 .

[5]  R. Moreyra,et al.  COMPRESSIVE DEFORMATION PATTERNS OF SELECTED FOOD POWDERS , 1980 .

[6]  S. Sokhansanj,et al.  Specific energy requirement for compacting corn stover. , 2006, Bioresource technology.

[7]  R. H. Myers,et al.  Response Surface Methodology: Process and Product Optimization Using Designed Experiments , 1995 .

[8]  Shahab Sokhansanj,et al.  Process conditions affecting the physical quality of alfalfa pellets , 1996 .

[9]  N. Mohsenin,et al.  Stress relaxation and energy requirements in compaction of unconsolidated materials , 1976 .

[10]  M. Sjöström,et al.  Effects of raw material moisture content, densification pressure and temperature on some properties of Norway spruce pellets , 2005 .

[11]  P. D. Jensen,et al.  Comparative study of durability test methods for pellets and briquettes , 2006 .

[12]  I. Obernberger,et al.  Physical characterisation and chemical composition of densified biomass fuels with regard to their combustion behaviour , 2004 .

[13]  S. D. Probert,et al.  The briquetting of wheat straw , 1977 .

[14]  A. W. Jenike,et al.  STORAGE AND FLOW OF SOLIDS :(REV. 1980. ) , 1980 .

[15]  N. Mohsenin.  Physical properties of plant and animal materials , 1970 .