Abstract Grounds beneath large civil engineering structures (bridges, dams, tunnels) that are established in the terrain of rock discontinuities represent a risk of mechanical failure. The surface topology of joint surfaces strongly influences shear strength of these discontinuities. It is the asperities that mainly determine the surface topologies and the asperities are characterized by the so-called joint roughness coefficients. In geotechnical practice the joint roughness coefficients are often evaluated visually using ten standard two-dimensional profiles. The visual assessment is rather a subjective procedure but it may be replaced by a computer. The present paper deals with a computerized assessment of joint roughness coefficients. For this purpose the Fourier formalism is employed and works as an expert system recognizing surface topologies.
[1]
N. Barton,et al.
The shear strength of rock joints in theory and practice
,
1977
.
[2]
T. Ficker.
Fracture surfaces and compressive strength of hydrated cement pastes
,
2012
.
[3]
Dalibor Martisek,et al.
The two-dimensional and three-dimensional processing of images provided by conventional microscopes.
,
2006,
Scanning.
[4]
T. Ficker,et al.
Roughness and fractality of fracture surfaces as indicators of mechanical quantities of porous solids
,
2011
.
[5]
Nick Barton,et al.
Review of a new shear-strength criterion for rock joints
,
1973
.
[6]
H. Jennings,et al.
Roughness of Fracture Surfaces and Compressive Strength of Hydrated Cement Pastes
,
2010
.