Dynamically Tunable Attenuator on a Graphene-Based Microstrip Line

In this paper, a novel type of dynamically tunable attenuator based on graphene is proposed. This type of attenuator is composed of one or two graphene sandwich structures (GSSs) and a microstrip line. The GSSs are spread on the substrate of microstrip line near the signal strip along the direction of propagation to dissipate electromagnetic field. By the application of biased voltage, the surface impedance of graphene can be tuned, and consequently, the insertion loss of microstrip line can also be adjusted while the return loss maintains relatively low level. A transverse equivalent network and a closed form of attenuation of each attenuator are also proposed, which can be utilized to analyze the performance of attenuator with different critical parameters of graphene in detail. According to the analysis, there is a maximum value of the attenuation as the surface impedance of graphene rises from 0 to $3000~\Omega /\Box $ . As an example, a prototype of each tunable microstrip line attenuator operating at gigahertz frequencies is fabricated and measured. The fabricated attenuator present favorable attenuation ranges from 3 to 15 dB, at the operating frequency from 9 to 40 GHz, and with a stable wideband attenuation corresponding to bias voltage changing from 0 to 4.0 V.

[1]  M. Bozzi,et al.  Highly tunable and large bandwidth attenuator based on few-layer graphene , 2017, 2017 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP).

[2]  R. Harrington.  Time-Harmonic Electromagnetic Fields , 1961 .

[3]  G. Dambrine,et al.  RF characterization of epitaxial graphene nano ribbon field effect transistor , 2011, 2011 IEEE MTT-S International Microwave Symposium.

[4]  M. Bozzi,et al.  Broadband Microwave Attenuator Based on Few Layer Graphene Flakes , 2015, IEEE Transactions on Microwave Theory and Techniques.

[5]  George W. Hanson,et al.  Quasi-transverse electromagnetic modes supported by a graphene parallel-plate waveguide , 2008 .

[6]  M. Bozzi,et al.  On the use of electrostatically doped graphene: Analysis of microwave attenuators , 2014, 2014 International Conference on Numerical Electromagnetic Modeling and Optimization for RF, Microwave, and Terahertz Applications (NEMO).

[7]  M. Bozzi,et al.  Tunable and input-matched attenuator based on few-layer graphene , 2017, 2017 47th European Microwave Conference (EuMC).

[8]  Maurizio Bozzi,et al.  Applications of Graphene at Microwave Frequencies , 2015 .

[9]  Wei-Bing Lu,et al.  Dynamically Tunable Substrate-Integrated-Waveguide Attenuator Using Graphene , 2018, IEEE Transactions on Microwave Theory and Techniques.

[10]  Ruo Feng Xu,et al.  Analysis of Loaded Substrate Integrated Waveguides and Attenuators , 2014, IEEE Microwave and Wireless Components Letters.

[11]  M. Dragoman,et al.  Graphene for Microwaves , 2010, IEEE Microwave Magazine.

[12]  J. S. Gomez-Diaz,et al.  Non-contact characterization of graphene surface impedance at micro and millimeter waves , 2012 .

[13]  David C. Chang,et al.  The thin-substrate approximation for reflection from the end of a slab-loaded parallel-plate waveguide with application to microstrip patch antennas , 1982 .

[14]  M. Bozzi,et al.  Microwave applications of graphene for tunable devices , 2014, 2014 9th European Microwave Integrated Circuit Conference.

[15]  S. Pei,et al.  Graphene segregated on Ni surfaces and transferred to insulators , 2008, 0804.1778.

[16]  M. Bozzi,et al.  Enhanced Tunable Microstrip Attenuator Based on Few Layer Graphene Flakes , 2017, IEEE Microwave and Wireless Components Letters.

[17]  M. Bozzi,et al.  Graphene-based electronically tunable microstrip attenuator , 2014, 2014 IEEE MTT-S International Microwave Symposium (IMS2014).

[18]  E. Denlinger.  A Frequency Dependent Solution for Microstrip Transmission Lines , 1971 .

[19]  A. Obraztsov,et al.  Chemical vapor deposition of thin graphite films of nanometer thickness , 2007 .