Linear compressors with clearance seals and flexure bearings have been used for many years for space applications, and this article describes the development of linear compressors at Oxford. A new design of moving magnet motor is introduced and the use of flexure springs, linear motors, valves and their integration are all discussed. A ring down test indicates that the ‘viscous’ damping in the linear compressor is acceptable (in terms of the decay ratio against the number of periods). The measured motor characteristics compared well with the vector fields electromagnetic finite element model. With a revised structural design it is predicted that the motor efficiency would be ∼86% for the rated power (200 W shaft power at 50 Hz) enabling the linear compressor to have a high overall efficiency. The companion paper covers the experimental evaluation of the linear compressor.
[1]
G. Davey.
Review of the Oxford Cryocooler
,
1990
.
[2]
J. Delderfield,et al.
Performance of the Oxford miniature stirling cycle refrigerator
,
1986
.
[3]
Israel Urieli,et al.
Stirling Cycle Engine Analysis
,
1983
.
[4]
E. Tward,et al.
High Performance Flight Cryocooler Compressor
,
2002
.
[5]
Ion Boldea,et al.
Linear electrodynamic machine and methods for their use
,
1993
.
[6]
Paul Bailey,et al.
Development of a valved linear compressor for a satellite borne J-T cryocooler
,
2005
.
[7]
リリー，デイートマー・エリツヒ・ベルンハルト.
Reciprocating compressor driven by a linear motor
,
2003
.
[8]
P. C. T. de Boer.
Basic Limitations on the Performance of Stirling Cryocoolers
,
2004
.