A low phase noise W-band InP-HBT monolithic push-push VCO

This paper reports on what is believed to be the highest frequency bipolar VCO MMIC so far reported. The W-band VCO is based on a push-push oscillator topology which employs InP-HBTs with f/sub T/'s and f/sub max/'s of 70 and 200 GHz, respectively. The W-band VCO produces a maximum oscillating frequency of 108 GHz and delivers an output power of +0.92 dBm into 50 /spl Omega/. The VCO also obtains a tuning range of 2.73 GHz or 2.6% using a monolithic varactor. A phase noise of -88 dBc/Hz and -109 dBc/Hz is achieved at 1 MHz and 10 MHz offsets, respectively, and is believed to be the lowest phase noise reported for a monolithic W-band VCO. The push-push VCO design approach enables higher VCO frequency operation, lower noise performance, and smaller size which is attractive for MM-wave frequency source applications.

[1]  G. S. Dow,et al.  Monolithic W-band VCOs using pseudomorphic AlGaAs/InGaAs/GaAs HEMTs , 1992, GaAs IC Symposium Technical Digest 1992.

[2]  T. Block,et al.  Monolithic 77- and 94-GHz InP-based HBT MMIC VCOs , 1997, 1997 IEEE Radio Frequency Integrated Circuits (RFIC) Symposium. Digest of Technical Papers.

[3]  G. S. Dow,et al.  Low phase noise millimeter-wave frequency sources using InP based HBT technology , 1995, GaAs IC Symposium IEEE Gallium Arsenide Integrated Circuit Symposium 17th Annual Technical Digest 1995.

[5]  S. Chen,et al.  U-band MMIC HBT DRO , 1994 .

[6]  I. Aoki,et al.  80 GHz AlGaAs HBT oscillator , 1996, GaAs IC Symposium IEEE Gallium Arsenide Integrated Circuit Symposium. 18th Annual Technical Digest 1996.

[7]  Dimitris Pavlidis,et al.  A D-band monolithic fundamental oscillator using InP-based HEMT's , 1993 .

[8]  G. I. Haddad,et al.  A fully integrated monolithic D-band oscillator-doubler chain using InP-based HEMTs , 1992, GaAs IC Symposium Technical Digest 1992.