Application of gradient severe shot peening as a novel mechanical surface treatment on fatigue behavior of additively manufactured AlSi10Mg

[1]  N. Shamsaei,et al.  Superior effects of hybrid laser shock peening and ultrasonic nanocrystalline surface modification on fatigue behavior of additive manufactured AlSi10Mg , 2023, Surface and Coatings Technology.

[2]  N. Shamsaei,et al.  Assessing the efficacy of several impact-based mechanical techniques on fatigue behavior of additive manufactured AlSi10Mg , 2023, Materials Science and Engineering: A.

[3]  S. Bagherifard,et al.  Correlation of crack initiation and fatigue behavior of surface treated additive manufactured AlSi10Mg: experimental and machine learning approaches , 2023, Journal of Materials Research and Technology.

[4]  M. Bandini,et al.  On the effects of laser shock peening on fatigue behavior of V-notched AlSi10Mg manufactured by laser powder bed fusion , 2022, International Journal of Fatigue.

[5]  S. Martínez,et al.  Ultrasonic Surface Post-Processing of Hot Isostatic Pressed and Heat Treated Superalloy Parts Manufactured by Laser Powder Bed Fusion , 2022, SSRN Electronic Journal.

[6]  M. Bandini,et al.  Effects of different mechanical and chemical surface post-treatments on mechanical and surface properties of as-built laser powder bed fusion AlSi10Mg , 2022, Surface and Coatings Technology.

[7]  M. Bandini,et al.  The effects of microstructural and chemical surface gradients on fatigue performance of laser powder bed fusion AlSi10Mg , 2022, Materials Science and Engineering: A.

[8]  A. du Plessis,et al.  Fatigue behaviour of notched laser powder bed fusion AlSi10Mg after thermal and mechanical surface post-processing , 2022, Materials Science and Engineering: A.

[9]  Bi Zhang,et al.  Effects of laser shock peening on the ultra-high cycle fatigue performance of additively manufactured Ti6Al4V alloy , 2021 .

[10]  M. Bandini,et al.  Individual and synergistic effects of thermal and mechanical surface post-treatments on wear and corrosion behavior of laser powder bed fusion AlSi10Mg , 2021, Journal of Materials Processing Technology.

[11]  G. Farrahi,et al.  Introducing gradient severe shot peening as a novel mechanical surface treatment , 2021, Scientific Reports.

[12]  M. Bandini,et al.  Hybrid thermal, mechanical and chemical surface post-treatments for improved fatigue behavior of laser powder bed fusion AlSi10Mg samples with notched geometry , 2021, Surface and Coatings Technology.

[13]  A. Lamikiz,et al.  Surface Shot Peening Post-processing of Inconel 718 Alloy Parts Printed by Laser Powder Bed Fusion Additive Manufacturing , 2021, Journal of Materials Engineering and Performance.

[14]  J. Punch,et al.  Effects of processing parameters and heat treatment on thermal conductivity of additively manufactured AlSi10Mg by selective laser melting , 2021 .

[15]  S. Bagherifard,et al.  Mechanical characterization and interfacial enzymatic activity of AISI 316L stainless steel after surface nanocrystallization , 2021 .

[16]  G. Farrahi,et al.  Effects of Conventional and Severe Shot Peening on Residual Stress and Fatigue Strength of Steel AISI 1060 and Residual Stress Relaxation Due to Fatigue Loading: Experimental and Numerical Simulation , 2020, Metals and Materials International.

[17]  Huaiju Liu,et al.  Effect of shot peening coverage on residual stress and surface roughness of 18CrNiMo7-6 steel , 2020 .

[18]  M. Bandini,et al.  Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities , 2020 .

[19]  P. Prangnell,et al.  Quantification of strain fields and grain refinement in Ti-6Al-4V inter-pass rolled wire-arc AM by EBSD misorientation analysis , 2020 .

[20]  A. Amanov,et al.  Effect of Laser Shock Peening on Properties of Heat-Treated Ti–6Al–4V Manufactured by Laser Powder Bed Fusion , 2020, International Journal of Precision Engineering and Manufacturing-Green Technology.

[21]  M. Mohammadi,et al.  Post heat treatment of additive manufactured AlSi10Mg: On silicon morphology, texture and small-scale properties , 2020 .

[22]  A. Lutz,et al.  A Tailored AlSiMg Alloy for Laser Powder Bed Fusion , 2020, Metals.

[23]  Y. G. Liu,et al.  Characteristics and formation mechanisms of defects in surface layer of TC17 subjected to high energy shot peening , 2020 .

[24]  R. Ren,et al.  An EBSD Investigation on the Evolution of the Surface Microstructure of D2 Wheel Steel During Rolling Contact Fatigue , 2020, Tribology Letters.

[25]  J. Gong,et al.  Effect of shot peening coverage on hydrogen embrittlement of a ferrite-pearlite steel , 2020 .

[26]  Zhanqiang Liu,et al.  Tool wear-induced microstructure evolution in localized deformation layer of machined Ti–6Al–4V , 2019, Journal of Materials Science.

[27]  Kazem Reza Kashyzadeh,et al.  Efficiency Analysis of Shot Peening Parameters on Variations of Hardness, Grain Size and Residual Stress via Taguchi Approach , 2019, Metals and Materials International.

[28]  Kazem Reza Kashyzadeh,et al.  Surface layer nanocrystallization of carbon steels subjected to severe shot peening: Analysis and optimization , 2019, Materials Characterization.

[29]  D. Glaser,et al.  Pore Closure Effect of Laser Shock Peening of Additively Manufactured AlSi10Mg , 2019, 3D Printing and Additive Manufacturing.

[30]  A. N. Jinoop,et al.  Post-processing of Laser Additive Manufactured Inconel 718 Using Laser Shock Peening , 2019, International Journal of Precision Engineering and Manufacturing.

[31]  B. Gan,et al.  Effect of high energy shot peening on the wear resistance of TiN films on a TA2 surface , 2019, Surface and Coatings Technology.

[32]  F. Jiang,et al.  Ultrasonic Peening Treatment Used to Improve Stress Corrosion Resistance of AlSi10Mg Components Fabricated Using Selective Laser Melting , 2019, Metals.

[33]  Yingang Liu,et al.  Structure response characteristics and surface nanocrystallization mechanism of alpha phase in Ti-6Al-4V subjected to high energy shot peening , 2019, Journal of Alloys and Compounds.

[34]  Milad Hamidi Nasab,et al.  On morphological surface features of the parts printed by selective laser melting (SLM) , 2018, Additive Manufacturing.

[35]  H. Soyama,et al.  The use of various peening methods to improve the fatigue strength of titanium alloy Ti6Al4V manufactured by electron beam melting , 2018 .

[36]  Jian Li,et al.  Columnar to equiaxed transition during direct metal laser sintering of AlSi10Mg alloy: Effect of building direction , 2018, Additive Manufacturing.

[37]  J. Moverare,et al.  Influence of defects and as-built surface roughness on fatigue properties of additively manufactured Alloy 718 , 2018, Materials Science and Engineering: A.

[38]  Hao Zhang,et al.  The effects of electrically-assisted ultrasonic nanocrystal surface modification on 3D-printed Ti-6Al-4V alloy , 2018, Additive Manufacturing.

[39]  M. Elbestawi,et al.  Influence of Shot Peening on AlSi10Mg Parts Fabricated by Additive Manufacturing , 2018, Journal of Manufacturing and Materials Processing.

[40]  Kazem Reza Kashyzadeh,et al.  Effects of conventional, severe, over, and re-shot peening processes on the fatigue behavior of mild carbon steel , 2018, Surface and Coatings Technology.

[41]  Mario Guagliano,et al.  On the fatigue strength enhancement of additive manufactured AlSi10Mg parts by mechanical and thermal post-processing , 2018 .

[42]  S. Virtanen,et al.  Correlation between the surface coverage of severe shot peening and surface microstructural evolutions in AISI 321: A TEM, FE-SEM and GI-XRD study , 2018 .

[43]  Felix H. Kim,et al.  Investigation of pore structure in cobalt chrome additively manufactured parts using X-ray computed tomography and three-dimensional image analysis. , 2017, Additive manufacturing.

[44]  Alexander M. Korsunsky,et al.  submitter : Eigenstrain reconstruction of residual strains in an additively manufactured and shot peened nickel superalloy compressor blade , 2017 .

[45]  T. Nakamoto,et al.  Effect of silicon content on densification, mechanical and thermal properties of Al-xSi binary alloys fabricated using selective laser melting , 2017 .

[46]  C. Emmelmann,et al.  Additive manufacturing of metals , 2016 .

[47]  Amrita Basak,et al.  Epitaxy and Microstructure Evolution in Metal Additive Manufacturing , 2016 .

[48]  Masaaki Nakai,et al.  Using Cavitation Peening to Improve the Fatigue Life of Titanium Alloy Ti-6Al-4V Manufactured by Electron Beam Melting , 2016 .

[49]  J. Kruth,et al.  Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder , 2013 .

[50]  B. Twomey,et al.  Comparison between shot peening and abrasive blasting processes as deposition methods for hydroxyapatite coatings onto a titanium alloy , 2013 .

[51]  S. Bagherifard,et al.  Fatigue behavior of a low-alloy steel with nanostructured surface obtained by severe shot peening , 2012 .

[52]  Y. Gao.  Influence of shot peening on tension–tension fatigue property of two high strength Ti alloys , 2006 .

[53]  K. Tsuchiya,et al.  Formation of Nanocrystalline Structure in Steels by Air Blast Shot Peening and Particle Impact Processing , 2004 .

[54]  S. N. Tiwari,et al.  Wear characteristics of Al-Si alloys , 1994 .

[55]  E. Hall,et al.  The Deformation and Ageing of Mild Steel: III Discussion of Results , 1951 .

[56]  Tarasankar DebRoy,et al.  An improved prediction of residual stresses and distortion in additive manufacturing , 2017 .

[57]  D. K. Dwivedi.  Wear behaviour of cast hypereutectic aluminium silicon alloys , 2006 .