Synergistic effect of Ti and Al on L12-phase design in CoCrFeNi-based high entropy alloys

[1]  P. Liaw,et al.  Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures , 2019, Acta Materialia.

[2]  B. Han,et al.  Solid solubility, precipitates, and stacking fault energy of micro-alloyed CoCrFeNi high entropy alloys , 2018, Journal of Alloys and Compounds.

[3]  J. Kai,et al.  Tuning the defects in face centered cubic high entropy alloy via temperature-dependent stacking fault energy , 2018, Scripta Materialia.

[4]  L. X. Zhang,et al.  Precipitation-hardened high entropy alloys with excellent tensile properties , 2018, Materials Science and Engineering: A.

[5]  T. Nieh,et al.  Thermal stability and coarsening of coherent particles in a precipitation-hardened (NiCoFeCr)94Ti2Al4 high-entropy alloy , 2018 .

[6]  R. Logé,et al.  The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials , 2018 .

[7]  Kaisheng Ming,et al.  Realizing strength-ductility combination of coarse-grained Al0.2Co1.5CrFeNi1.5Ti0.3 alloy via nano-sized, coherent precipitates , 2018 .

[8]  Ji-Jung Kai,et al.  Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy , 2017 .

[9]  Jonathan D. Poplawsky,et al.  Secondary phases in AlxCoCrFeNi high-entropy alloys: An in-situ TEM heating study and thermodynamic appraisal , 2017 .

[10]  D. Choudhuri,et al.  Cu assisted stabilization and nucleation of L1 2 precipitates in Al 0.3 CuFeCrNi 2 fcc-based high entropy alloy , 2017 .

[11]  N. Tsuji,et al.  Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy , 2017 .

[12]  Sheng Guo,et al.  Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range , 2017 .

[13]  T. Nieh,et al.  Precipitation behavior and its effects on tensile properties of FeCoNiCr high-entropy alloys , 2016 .

[14]  D. Miracle,et al.  A critical review of high entropy alloys and related concepts , 2016 .

[15]  D. Choudhuri,et al.  Stability of ordered L12 and B2 precipitates in face centered cubic based high entropy alloys - Al0.3CoFeCrNi and Al0.3CuFeCrNi2 , 2016 .

[16]  C. Liu,et al.  Kinetic ways of tailoring phases in high entropy alloys , 2016, Scientific Reports.

[17]  C. Tasan,et al.  Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off , 2016, Nature.

[18]  Feng He,et al.  Strengthening the CoCrFeNiNb0.25 high entropy alloy by FCC precipitate , 2016 .

[19]  Qiang Wang,et al.  Designing eutectic high entropy alloys of CoCrFeNiNbx , 2016 .

[20]  K. An,et al.  A precipitation-hardened high-entropy alloy with outstanding tensile properties , 2016 .

[21]  C. Tasan,et al.  Design of a twinning-induced plasticity high entropy alloy , 2015 .

[22]  Anna M. Manzoni,et al.  High-Temperature Tensile Strength of Al10Co25Cr8Fe15Ni36Ti6 Compositionally Complex Alloy (High-Entropy Alloy) , 2015 .

[23]  R. Ritchie,et al.  A fracture-resistant high-entropy alloy for cryogenic applications , 2014, Science.

[24]  Huijun Kang,et al.  A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys , 2014, Scientific Reports.

[25]  K. Dahmen,et al.  Microstructures and properties of high-entropy alloys , 2014 .

[26]  Tongmin Wang,et al.  Annealing effects on the microstructure and properties of bulk high-entropy CoCrFeNiTi0.5 alloy casting ingot , 2014 .

[27]  B. Cantor,et al.  Microstructural development in equiatomic multicomponent alloys , 2004 .

[28]  T. Shun,et al.  Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes , 2004 .

[29]  F. Haider.  Calculation of TEM Contrast of Small Coherent Precipitates , 1989, 16 January.