Parametric formulae for axial stiffness of CHS X-joints subjected to brace axial tension

Recent research has shown that circular hollow section (CHS) joints may exhibit non-rigid behavior under axial load or bending. The non-rigid behavior significantly affects the mechanical performance of structures. This paper is concerned with the parametric formulae for predicting axial stiffness of CHS X-joints while braces are in tension. The factors influencing the axial stiffness of CHS X-joints under brace axial tension are investigated, including the joint geometric parameters, the axial force of the chord, and bending moments of braces in two directions, etc. Effects of various parameters on axial stiffness of CHS X-joints are examined by systematic single-parameter nonlinear analysis using shell finite element methods. The analysis is implemented in a finite element code, ANSYS. The observed trends form the basis of the formulae for calculating the joint axial stiffness under brace axial tension by multivariate regression technique. In order to simplify the formulae, two non-dimensional variables are introduced. The proposed formulae can be used to calculate the joint axial stiffness in the design of single-layer steel tubular structures.

[1]  Jaap Wardenier,et al.  Static strength of thick-walled CHS X-joints—Part II. Effect of chord stresses , 2003 .

[2]  Alain Nussbaumer,et al.  A critical examination of the size effect correction for welded steel tubular joints , 2009 .

[3]  Chen Yiyi.  Experiments on Bending Rigidity and Resistance of Unstiffened Tubular Joints , 2001 .

[4]  Yoo Sang Choo,et al.  Elastic¿plastic crack driving force for tubular X-joints with mismatched welds , 2005 .

[5]  C. K. Soh,et al.  Limit Analysis of Ultimate Strength of Tubular X-Joints , 2000 .

[6]  Guo-zhi Qiu,et al.  Analysis and calculation of axial stiffness of tubular X-joints under compression on braces , 2009 .

[7]  Temel Türker,et al.  Assessment of semi-rigid connections in steel structures by modal testing , 2009 .

[8]  Tie-Yun Chen,et al.  Stress analysis of spatial frames with consideration of local flexibility of multiplanar tubular joint , 1996 .

[9]  W. M. Gho,et al.  Parametric Equation for Static Strength of Tubular Circular Hollow Section Joints with Complete Overlap of Braces , 2008 .

[10]  Jaap Wardenier,et al.  Effects of boundary conditions and chord stresses on static strength of thick-walled CHS K-joints , 2006 .

[12]  Zhao Jin-cheng.  Experimental Research on Rigidity of Circular Tubular X-Joints , 2008 .

[13]  I. Puente,et al.  Numerical model and experimental tests on single-layer latticed domes with semi-rigid joints , 2007 .

[14]  Messaoud Saidani,et al.  Mechanical model for the analysis of steel frames with semi rigid joints , 2009 .

[15]  Wu,et al.  LOCAL FLEXIBILITY BEHAVIOR OF TUBULAR JOINTS AND ITS EFFECT ON GLOBAL ANALYSIS OF TUBULAR STRUCTURES , 1990 .

[16]  Yiyi Chen,et al.  Modelling and classification of tubular joint rigidity and its effect on the global response of CHS lattice girders , 2005 .

[17]  Shu Xing-ping.  Full-scale experiment research on CHS joints of steel roof of He Long Stadium in Changsha , 2004 .