Auto-Ignition of Iso-Stoichiometric Blends of Gasoline-Ethanol-Methanol (GEM) in SI, HCCI and CI Combustion Modes
暂无分享,去创建一个
Bengt Johansson | Mani Sarathy | Gustav Nyrenstedt | Muhammad Waqas | Kai Morganti | Nimal Naser | Jeroen Feijs | B. Johansson | Gustav Nyrenstedt | N. Naser | M. Sarathy | K. Morganti | Muhammad Waqas | Jeroen Feijs
[1] Sebastian Verhelst,et al. Performance and emissions of iso-stoichiometric ternary GEM blends on a production SI engine , 2014 .
[2] Richard Pearson,et al. Iso-Stoichiometric Ternary Blends of Gasoline, Ethanol and Methanol: Investigations into Exhaust Emissions, Blend Properties and Octane Numbers , 2012 .
[3] Yoann Viollet,et al. Improving the Efficiency of Conventional Spark-Ignition Engines Using Octane-on-Demand Combustion - Part II: Vehicle Studies and Life Cycle Assessment , 2016 .
[4] Jihad Badra,et al. A blending rule for octane numbers of PRFs and TPRFs with ethanol , 2016 .
[5] Richard Pearson,et al. Extending the role of alcohols as transport fuels using iso-stoichiometric ternary blends of gasoline, ethanol and methanol , 2013 .
[6] Yoshihiro Iwashita,et al. Onboard Gasoline Separation for Improved Vehicle Efficiency , 2014 .
[7] William L. Roberts,et al. Primary Reference Fuels (PRFs) as Surrogates for Low Sensitivity Gasoline Fuels , 2016 .
[8] Simeon Iliev,et al. A Comparison of Ethanol and Methanol Blending with Gasoline Using a 1- D Engine Model , 2015 .
[9] Aamir Farooq,et al. Ignition of alkane-rich FACE gasoline fuels and their surrogate mixtures , 2015 .
[10] Roger Sierens,et al. The Physical and the Chemical Part of the Ignition Delay in Diesel Engines , 1996 .
[11] Yoann Viollet,et al. Improving the Efficiency of Conventional Spark-Ignition Engines Using Octane-on-Demand Combustion. Part I: Engine Studies , 2016 .
[12] Derek P. Moran. The Effects of Fuel Evaporation on the Octane Number of Methanol-Gasoline Blended Fuels , 1994 .
[13] Richard Pearson,et al. GEM ternary blends: removing the biomass limit by using iso-stoichiometric mixtures of gasoline, ethanol and methanol , 2011 .
[14] James P. Szybist,et al. Intermediate Alcohol-Gasoline Blends, Fuels for Enabling Increased Engine Efficiency and Powertrain Possibilities , 2014 .
[15] Gautam Kalghatgi,et al. The outlook for fuels for internal combustion engines , 2014 .
[16] Matthew A. Ratcliff,et al. Expanding the Experimental Capabilities of the Ignition Quality Tester for Autoigniting Fuels , 2010 .
[17] John B. Heywood,et al. Benefits of a Higher Octane Standard Gasoline for the U.S. Light-Duty Vehicle Fleet , 2014 .
[18] Z. Stępień,et al. Intake valve and combustion chamber deposits formation – the engine and fuel related factors that impacts their growth , 2014 .
[19] S. M. Sarathy,et al. Alcohol combustion chemistry , 2014 .
[20] Guillaume Bourhis,et al. Understanding octane number evolution for enabling alternative low RON refinery streams and octane boosters as transportation fuels , 2015 .
[21] Michael J. Brear,et al. The octane numbers of ethanol blended with gasoline and its surrogates , 2014 .
[22] William L. Roberts,et al. A computational methodology for formulating gasoline surrogate fuels with accurate physical and chemical kinetic properties , 2015 .
[23] Richard Pearson,et al. Evolution of alcohol fuel blends towards a sustainable transport energy economy , 2012 .
[24] I Yahuza,et al. A Performance Review of Ethanol-Diesel Blended Fuel Samples in Compression-Ignition Engine , 2015 .
[25] James G. Speight,et al. Handbook of Alternative Fuel Technologies, Second Edition , 2014 .
[26] Richard J Pearson,et al. Iso-stoichiometric fuel blends: characterisation of physicochemical properties for mixtures of gasoline, ethanol, methanol and water , 2015 .
[27] Hui Xie,et al. Comparison of HCCI Combustion Respectively Fueled with Gasoline, Ethanol and Methanol through the Trapped Residual Gas Strategy , 2006 .
[28] William Cannella,et al. HCCI Operability Limits: The Impact of Refinery Stream Gasoline Property Variation , 2012 .
[29] Timothy J. Wallington,et al. Octane Numbers of Ethanol− and Methanol−Gasoline Blends Estimated from Molar Concentrations , 2010 .
[30] Michael Howard Shelby,et al. Octane Numbers of Ethanol-Gasoline Blends: Measurements and Novel Estimation Method from Molar Composition , 2012 .
[31] N. Naser,et al. Effect of Temperature, Pressure and Equivalence Ratio on Ignition Delay in Ignition Quality Tester (IQT): Diesel, n-Heptane, and iso-Octane Fuels under Low Temperature Conditions , 2015 .
[32] Suk Ho Chung,et al. Relating the octane numbers of fuels to ignition delay times measured in an ignition quality tester (IQT) , 2017 .
[33] Bengt Johansson,et al. Blending Octane Number of Ethanol in HCCI, SI and CI Combustion Modes , 2016 .
[34] William L. Roberts,et al. Compositional effects on the ignition of FACE gasolines , 2016 .
[35] Robert L. McCormick,et al. Heat of Vaporization Measurements for Ethanol Blends Up to 50 Volume Percent in Several Hydrocarbon Blendstocks and Implications for Knock in SI Engines , 2015 .
[36] Michael J. Brear,et al. The Effect of Charge Cooling on the RON of Ethanol/Gasoline Blends , 2013 .
[37] S. Mani Sarathy,et al. Jet-stirred reactor oxidation of alkane-rich FACE gasoline fuels , 2017 .
[38] Gautam Kalghatgi,et al. Fuel Anti-Knock Quality - Part I. Engine Studies. , 2001 .
[39] James William Griffith Turner,et al. GEM Ternary Blends: Testing Iso-Stoichiometric Mixtures of Gasoline, Ethanol and Methanol in a Production Flex-Fuel Vehicle Fitted with a Physical Alcohol Sensor , 2012 .
[40] Richard Pearson,et al. Gasoline-ethanol-methanol tri-fuel vehicle development and its role in expediting sustainable organic fuels for transport , 2009 .
[41] Martin Tuner,et al. Development of New Test Method for Evaluating HCCI Fuel Performance , 2014 .
[42] S. Mani Sarathy,et al. Fuel Class Higher Alcohols , 2016 .
[43] L Bromberg,et al. Methanol as an Alternative Transportation Fuel in the U.S.: Options for Sustainable and/or Energy-Secure Transportation , 2010 .