An overview of buckling and ultimate strength of spherical pressure hull under external pressure

The load-carrying capability of spherical shells under external pressure has been the subject of a long history and many theoretical and experimental studies have been carried out. However, from a comparative study on the design rules for the minimum thickness of the deep manned spherical shells from various classification societies, significant differences have been found. This indicates that these design rules need to be updated and unified like Common Structural Rules for tankers and bulk carriers. In order to lay a foundation for this target, a systematic study is carried out to develop a consistent calculation method for predicting the ultimate strength of spherical pressure hull under external pressure. This is the first paper of a series of three for reporting this study and in this paper, a critical review on the buckling and ultimate strength of spherical pressure hulls is carried out and further problems to be studied are identified. This could lay a solid foundation for the further study.

[1]  Nicholas F. Morris,et al.  Inelastic Buckling of Spherical Shells , 1974 .

[2]  James M. Hill.  CRITICAL PRESSURES FOR THE BUCKLING OF THICK-WALLED SPHERICAL SHELLS UNDER UNIFORM EXTERNAL PRESSURE , 1976 .

[3]  Martin A. Krenzke,et al.  TESTS OF STIFFENED AND UNSTIFFENED MACHINED SPHERICAL SHELLS UNDER EXTERNAL HYDROSTATIC PRESSURE , 1963 .

[4]  Lallit Anand,et al.  Analysis of strain-hardening viscoplastic thick-walled sphere and cylinder under external pressure , 1991 .

[5]  Q. S. Fan.  Post-buckling behaviour and imperfection sensitivity of spherical shells based on nonlinear elastic stability theory , 1989 .

[6]  Jan Błachut,et al.  Plastic Buckling of Imperfect Hemispherical Shells Subjected to External Pressure , 1987 .

[7]  James G.A. Croll.  Towards a rationally based elastic-plastic shell buckling design methodology , 1995 .

[8]  Norman Jones,et al.  Axisymmetric and bifurcation creep buckling of externally pressurised spherical shells , 1980 .

[9]  S. Timoshenko.  Theory of Elastic Stability , 1936 .

[10]  Robert Zoelly,et al.  Ueber ein Knickungsproblem an der Kugelschale , 1915 .

[11]  Weicheng Cui,et al.  Further study on the ultimate strength analysis of spherical pressure hulls , 2010 .

[12]  A. C. Walker,et al.  An analytical study of the rotationally symmetric non-linear buckling of a complete spherical shell under external pressure , 1968 .

[13]  Md. Wahhaj Uddin,et al.  Buckling of general spherical shells under external pressure , 1987 .

[14]  Tatsuzo Koga,et al.  The axisymmetric buckling of initially imperfect complete spherical shells , 1969 .

[15]  G D Galletly,et al.  Buckling strength of imperfect steel hemispheres , 1995 .

[16]  Nicholas F. Morris,et al.  Symmetric Buckling of Inelastic Spherical Shells , 1972 .

[17]  Walter Wunderlich,et al.  Buckling behaviour of imperfect spherical shells , 2002 .

[18]  John Morton,et al.  On the Buckling Design of Spherical Shells , 1981 .

[19]  Jan Błachut,et al.  Strength, Stability, and Optimization of Pressure Vessels: Review of Selected Problems , 2008 .

[20]  M. Hamid,et al.  Reductions in the collapse strength of spherical shells due to plate misalignment , 1987 .

[21]  Jørgen Juncher Jensen,et al.  Buckling behaviour of imperfect spherical shells subjected to different load conditions , 1995 .

[22]  Jan Błachut,et al.  Buckling Design of Imperfect Welded Hemispherical Shells Subjected to External Pressure , 1991 .

[23]  Robert Kao.  A Note on Buckling of Spherical Caps With Initial Asymmetric Imperfections , 1972 .

[24]  J Blachut.  Pressure vessel components: some recent developments in strength and buckling , 1998 .

[25]  Kunio Kokubo,et al.  Effects of geometrical imperfections and boundaries on the buckling strength of a spherical shell , 1984 .

[26]  Roy Nersesian,et al.  International Association Of Classification Societies , 2010 .

[27]  M.Iu. Zhukov,et al.  Post-buckling behavior of a closed spherical shell: PMM vol. 35, n≗ 5, 1971, pp. 840–847 , 1971 .

[28]  W. H. Horton,et al.  Imperfections, a main contributor to scatter in experimental values of buckling load , 1965 .

[29]  J.D.W. Hossack.  Experimental investigation of the nonlinear behaviour of shallow spherical shells , 1965 .

[30]  Cui Wei-cheng,et al.  A Comparison of Different Rules for the Spherical Pressure Hull of Deep Manned Submersibles , 2011 .

[31]  S. F. Eggwertz,et al.  Buckling strength of spherical shells , 1990 .

[32]  G. Knightly,et al.  Existence and stability of axisymmetric buckled states of spherical shells , 1976 .

[33]  J Bachut.  Developments in strength and stability of shell components used in submersibles , 2009 .

[34]  William L. Cleghorn,et al.  Axisymmetric buckling of thin shallow circular spherical shells under uniform pressure for large values of geometric parameter λ , 1994 .

[35]  Li Liang-bi.  Research on the Ultimate Strength of Pressure Spherical Shell with Openings in Manned Deep-sea Submersible , 2005 .

[36]  A. M. Vinogradov,et al.  Buckling of Spherical Viscoelastic Shells , 1980 .

[37]  N C Huang,et al.  Inelastic Buckling of a Deep Spherical Shell Subject to External Pressure , 1974 .

[38]  John D. Renton,et al.  On the buckling of thick spherical shells under normal pressure , 1981 .

[39]  健 宗像,et al.  Application of the Finite Element Method to Elastic-Plastic Creep Buckling Analysis of Partial Spherical Shell , 1988 .

[40]  Christopher J. Earls,et al.  A posteriori initial imperfection identification in shell buckling problems , 2008 .

[41]  Yibin Fu,et al.  Some asymptotic results concerning the buckling of a spherical shell of arbitrary thickness , 1998 .

[42]  Wang Ren-hua.  Development of Research on the Pressure Shell Structure of Deep Manned Submersible , 2004 .

[43]  Liu Tao.  Research on the design of spherical pressure hull in manned deep-sea submersible , 2007 .

[44]  Li Liang-bi.  The Influence of the Initial Imperfections on the Ultimate Strength of Manned Deep-sea Submersible Pressure Sphere Hull , 2007 .

[45]  Clifford Goodman,et al.  American Society of Mechanical Engineers , 1988 .

[46]  Harry E. Rauch,et al.  Buckling of a Complete Spherical Shell Under Uniform External Pressure , 1978 .

[47]  K Yokota,et al.  RESEARCH ON PRESSURE HULL FOR DEEP SUBMERGENCE RESEARCH VEHICLES MADE OF TITANIUM ALLOY , 1986 .

[48]  K Yokota,et al.  COLLAPSE STRENGTH OF SPHERICAL PRESSURE HULL FOR DEEP SUBMERGENCE RESEARCH VEHICLE MADE OF TITANIUM ALLOY , 1985 .

[49]  Zili Wang,et al.  Nonlinear Finite Element Analysis of Pressurized Spherical Shell for Deep Water Structure , 2007 .

[50]  I. Trendafilova,et al.  A stochastic approach to the problem of stability of a spherical shell with initial imperfections , 1992 .

[51]  Norman Jones.  Creep Buckling of a Complete Spherical Shell , 1976 .

[52]  Cui Wei-cheng.  Ultimate strength of pressure spherical hull in deep-sea manned submersibles , 2004 .