Upcycling: converting waste plastics into paramagnetic, conducting, solid, pure carbon microspheres.

The recent tremendous increase in the volume of waste plastics (WP) will have a harmful environmental impact on the health of living beings. Hundreds of years are required to degrade WP in atmospheric conditions. Hence, in coming years, in addition to traditional recycling services, innovative "upcycling" processes are necessary. This article presents an environmentally benign, solvent-free autogenic process that converts various WP [low density polyethylene (LDPE), high density polyethylene (HDPE), polyethylene terephthalate (PET), polystyrene (PS), or their mixtures] into carbon microspheres (CMSs), an industrially significant, value-added product. The thermal dissociation of these individual or mixed WP in a closed reactor under autogenic pressure ( approximately 1000 psi) produced dry, pure powder of CMSs. In this paper, the optimization of process parameters such as the effect of mixing of WP with other materials, and the role of reaction temperature and time are reported. Employing advanced analytical techniques, the atomic structure, composition, and morphology of as-obtained CMSs were analyzed. The room-temperature paramagnetism in CMSs prepared from waste LDPE, HDPE, and PS was further studied by electron paramagnetic resonance (EPR). The conducting and paramagnetic nature of CMSs holds promise for their potential applications in toners, printers, paints, batteries, lubricants, and tires.

[1]  V. Pol,et al.  Synthesis of monodispersed prolate spheroid shaped paramagnetic carbon , 2009 .

[2]  Stuart Ross,et al.  The environmental effect of reusing and recycling a plastic-based packaging system , 2003 .

[3]  C. R. Martin,et al.  Carbon nanotubule membranes for electrochemical energy storage and production , 1998, Nature.

[4]  N. Fraunholcz,et al.  Separation of waste plastics by froth flotation––a review, part I , 2004 .

[5]  V. Pol,et al.  Magnetic properties of dense graphitic filaments formed via thermal decomposition of mesitylene in an applied electric field , 2006 .

[6]  P. Serp,et al.  A chemical vapour deposition process for the production of carbon nanospheres , 2001 .

[7]  M. Inagaki,et al.  Carbon materials Structure, texture and intercalation , 1996 .

[8]  Y. Qian,et al.  Olivary particles: unique carbon microstructure synthesized by catalytic pyrolysis of acetone. , 2005, The journal of physical chemistry. B.

[9]  Y. Qian,et al.  A chemical route from PTFE to amorphous carbon nanospheres in supercritical water. , 2004, Chemical communications.

[10]  V. Pol,et al.  High yield one-step synthesis of carbon spheres produced by dissociating individual hydrocarbons at their autogenic pressure at low temperatures , 2006 .

[11]  A. Salmiaton,et al.  Waste catalysts for waste polymer. , 2007, Waste management.

[12]  V. Pol,et al.  Remediating plastic waste into carbon nanotubes. , 2010, Journal of environmental monitoring : JEM.

[13]  M. Fujii,et al.  Structure and electronic properties of carbon onions , 2001 .

[14]  Philip G. Collins,et al.  Nanotube Nanodevice , 1997 .

[15]  H. S. Park,et al.  Characteristics of PE Gasification by Steam Plasma , 2006 .

[16]  V. Pol,et al.  Measurement of Autogenous Pressure and Dissociated Species during the Thermolysis of Mesitylene for the Synthesis of Monodispersed, Pure, Paramagnetic Carbon Particles , 2009 .

[17]  M. Inagaki,et al.  Pressure carbonization of polyethylene-polyvinylchloride mixtures , 1983 .

[18]  Y. Qian,et al.  A Mild Reduction Route to PTFE Degradation at Low Temperature , 2004 .

[19]  V. Pol,et al.  Carbon spherules: synthesis, properties and mechanistic elucidation , 2004 .

[20]  V. Pol,et al.  A solvent free process for the generation of strong, conducting carbon spheres by the thermal degradation of waste polyethylene terephthalate , 2009 .

[21]  H. C. Foley,et al.  Ultrasonic deposition of high-selectivity nanoporous carbon membranes , 1999, Science.