Water content is one of the most important factors influencing rock strength. Considerable research has been carried out to investigate rock strength under both dry and water saturated conditions. According to these results, the petrophysical properties of rocks decrease with increasing moisture and this can result in an increase in the mechanical compliance in some cases. In several cases, the strength decrease is remarkable after only 1% water saturation. For rock mechanics and rock engineering projects, it is strongly recommended that the dry uniaxial compressive strength is used for the purposes of strength classification, while for the actual engineering design it is essential to establish the wet strength and ideally the water sensitivity of the rock, in order to asses their potential change in strength and deformability. The goal of this paper is to show a method for estimating the sensitivity of sandstone rocks to water content, using the published data.
[1]
A. B. Hawkins,et al.
Sensitivity of sandstone strength and deformability to changes in moisture content
,
1992,
Quarterly Journal of Engineering Geology.
[2]
F G Bell,et al.
8 – Laboratory testing of rocks
,
1992
.
[3]
F. Bell.
The physical and mechanical properties of the fell sandstones, Northumberland, England
,
1978
.
[4]
B. Vásárhelyi,et al.
Statistical Analysis of the Influence of Water Content on the Strength of the Miocene Limestone
,
2005
.
[5]
B. Vásárhelyi,et al.
Some observations regarding the strength and deformability of sandstones in dry and saturated conditions
,
2003
.