Selectivity of Copper by Amine-Based Ion Recognition Polymer Adsorbent with Different Aliphatic Amines

This paper investigates the selectivity of GMA-based-non-woven fabrics adsorbent towards copper ion (Cu) functionalized with several aliphatic amines. The aliphatic amines used in this study were ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetetramine (TETA), and tetraethylenepentamine (TEPA). The non-woven polyethylene/polypropylene fabrics (NWF) were grafted with glycidyl methacrylate (GMA) via pre-radiation grafting technique, followed by chemical functionalization with the aliphatic amine. To prepare the ion recognition polymer (IRP), the functionalized amine GMA-grafted-NWF sample was subjected to radiation crosslinking process along with the crosslinking agent, divinylbenzene (DVB), in the presence of Cu ion as a template in the matrix of the adsorbent. Functionalization with different aliphatic amine was carried out at different amine concentrations, grafting yield, reaction temperature, and reaction time to study the effect of different aliphatic amine onto amine density yield. At a concentration of 50% of amine and 50% of isopropanol, EDA, DETA, TETA, and TEPA had attained amine density around 5.12, 4.06, 3.04, and 2.56 mmol/g-ad, respectively. The amine density yield decreases further as the aliphatic amine chain grows longer. The experimental condition for amine functionalization process was fixed at 70% amine, 30% isopropanol, 60 °C for grafting temperature, and 2 h of grafting time for attaining 100% of grafting yield (Dg). The prepared adsorbents were characterized comprehensively in terms of structural and morphology with multiple analytical tools. An adsorptive removal and selectivity of Cu ion by the prepared adsorbent was investigated in a binary metal ion system. The IRP samples with a functional precursor of EDA, the smallest aliphatic amine had given the higher adsorption capacity and selectivity towards Cu ion. The selectivity of IRP samples reduces as the aliphatic amine chain grows longer, EDA to TEPA. However, IRP samples still exhibited remarkably higher selectivity in comparison to the amine immobilized GMA-g-NWF at similar adsorption experimental conditions. This observation indicates that IRP samples possess higher selectivity after incorporation of the ion recognition imprint technique via the radiation crosslinking process.

[1]  S. Selambakkannu,et al.  A kinetic and mechanistic study of adsorptive removal of metal ions by imidazole-functionalized polymer graft banana fiber , 2018, Radiation Physics and Chemistry.

[2]  Adil Denizli,et al.  Molecularly Imprinted Polymers for Removal of Metal Ions: An Alternative Treatment Method , 2018, Biomimetics.

[3]  B. Rivas,et al.  Polystyrene degraded and functionalized with acrylamide for removal of Pb(II) metal ions , 2018, Polymer Bulletin.

[4]  C. Tarley,et al.  Insight into the performance of molecularly imprinted poly(methacrylic acid) and polyvinylimidazole for extraction of imazethapyr in aqueous medium , 2018, Chemical Engineering Journal.

[5]  Jianhua Xiong,et al.  Preparation and application of novel chitosan-cellulose composite materials to adsorb Pb(II)and Cr(VI) ions from water , 2017 .

[6]  Yuanfeng Pan,et al.  Single and binary adsorption of heavy metal ions from aqueous solutions using sugarcane cellulose-based adsorbent. , 2017, Bioresource technology.

[7]  T. Vijaya,et al.  NOVEL METHOD FOR REMOVAL OF HEAVY METALS BY USING LOW COST ABSORBENTS , 2016 .

[8]  L. Ye,et al.  Covalent immobilization of molecularly imprinted polymer nanoparticles on a gold surface using carbodiimide coupling for chemical sensing. , 2016, Journal of colloid and interface science.

[9]  B. Mathew,et al.  DESIGN OF COPPER ION SELECTIVE POLYMERS BY MOLECULAR IMPRINTING APPROACH , 2015 .

[10]  J. Petrovich FTIR and DSC of polymer films used for packaging : LLDPE , PP and PVDC , 2015 .

[11]  Guillermo M. Nuesca,et al.  Amine functionalized radiation-induced grafted water hyacinth fibers for Pb2+, Cu2+ and Cr3+ uptake , 2014 .

[12]  Omar M Yaghi,et al.  Water adsorption in porous metal-organic frameworks and related materials. , 2014, Journal of the American Chemical Society.

[13]  P. Wyman,et al.  Amine-functionalization of glycidyl methacrylate-containing emulsion-templated porous polymers and immobilization of proteinase K for biocatalysis , 2014 .

[14]  P. Supaphol,et al.  The Study of Competitive Adsorption of Heavy Metal Ions from Aqueous Solution by Aminated Polyacrylonitrile Nanofiber Mats , 2014 .

[15]  O. Güven,et al.  Graft copolymerization of glycidyl methacrylate onto delignified kenaf fibers through pre-irradiation technique , 2013 .

[16]  André Margaillan,et al.  Recent advances on ion-imprinted polymers , 2013 .

[17]  Guillermo M. Nuesca,et al.  Gamma radiation-induced grafting of glycidyl methacrylate (GMA) onto water hyacinth fibers , 2013 .

[18]  Z. Hubicki,et al.  Selective Removal of Heavy Metal Ions from Waters and Waste Waters Using Ion Exchange Methods , 2012 .

[19]  Min Wang,et al.  A mild method of amine-type adsorbents syntheses with emulsion graft polymerization of glycidyl methacrylate on polyethylene non-woven fabric by pre-irradiation , 2012 .

[20]  幕内 恵三,et al.  Radiation processing of polymer materials and its industrial applications , 2012 .

[21]  Hongjuan Ma,et al.  Synthesis of Amine-type Adsorbents with Emulsion Graft Polymerization of 4-hydroxybutyl Acrylate Glycidylether , 2011 .

[22]  Soojin Park,et al.  Interface Science and Composites , 2011 .

[23]  D. Bhattacharyya,et al.  EXAFS study of binuclear hydroxo-bridged copper(II) complexes , 2011 .

[24]  Changkun Liu,et al.  Extended study of DETA-functionalized PGMA adsorbent in the selective adsorption behaviors and mechanisms for heavy metal ions of Cu, Co, Ni, Zn, and Cd. , 2010, Journal of colloid and interface science.

[25]  L. Hong,et al.  Functionalization of adsorbent with different aliphatic polyamines for heavy metal ion removal: characteristics and performance. , 2010, Journal of colloid and interface science.

[26]  S. Bajpai,et al.  Removal of copper(II) from aqueous solution using spent tea leaves (STL) as a potential sorbent. , 2010 .

[27]  M. Tamada,et al.  Biodegradable metal adsorbent synthesized by graft polymerization onto nonwoven cotton fabric , 2010 .

[28]  I. Mondragon,et al.  Effects of amine molecular structure on carbon nanotubes functionalization. , 2009, Journal of Nanoscience and Nanotechnology.

[29]  Y. Yagcı,et al.  Functionalization of Poly(divinylbenzene) Microspheres by Combination of Hydrobromination and Click Chemistry Processes: A Model Study , 2009 .

[30]  Changkun Liu,et al.  Selective removal of copper and lead ions by diethylenetriamine-functionalized adsorbent: behaviors and mechanisms. , 2008, Water research.

[31]  M. Tamada,et al.  Synthesis of Graft Adsorbent with N-Methyl-D-glucamine for Boron Adsorption , 2007 .

[32]  J. L. Garnett,et al.  The role of additives in the radiation induced copolymerization of monomers to cellulose , 2007 .

[33]  A. Donia,et al.  Effect of Chain Length of Aliphatic Amines Immobilized on a Magnetic Glycidyl Methacrylate Resin towards the Uptake Behavior of Hg(II) from Aqueous Solutions , 2007 .

[34]  C. Pradier,et al.  Adsorption on stainless steel surfaces of biosurfactants produced by gram-negative and gram-positive bacteria: consequence on the bioadhesive behavior of Listeria monocytogenes. , 2006, Colloids and surfaces. B, Biointerfaces.

[35]  U. Bergmann,et al.  High-resolution Mn EXAFS of the oxygen-evolving complex in photosystem II: structural implications for the Mn4Ca cluster. , 2005, Journal of the American Chemical Society.

[36]  G. Bayramoglu,et al.  Ethylenediamine grafted poly(glycidylmethacrylate-co-methylmethacrylate) adsorbent for removal of chromate anions , 2005 .

[37]  A. Denizli,et al.  Selective preconcentration of thorium in the presence of UO(2)(2+), Ce(3+) and La(3+) using Th(IV)-imprinted polymer. , 2005, Talanta.

[38]  S. Vicini,et al.  Grafting polymerization on cellulose based textiles: A 13C solid state NMR characterization , 2005 .

[39]  T. Chuah,et al.  Rice husk as a potentially low-cost biosorbent for heavy metal and dye removal : an overview , 2005 .

[40]  M. Díaz,et al.  Influence of the amination conditions on the textural properties and chromatographic behaviour of amino-functionalized glycidyl methacrylate-based particulate supports , 2003 .

[41]  L. Bubacco,et al.  Oxidized derivatives of Octopus vulgaris and Carcinus aestuarii hemocyanins at pH 7.5 and related models by x-ray absorption spectroscopy. , 2002, Biophysical journal.

[42]  G. Ozolins,et al.  WHO guidelines for drinking-water quality. , 1984, WHO chronicle.