Microfabrication and Characterization of a Selectively Metallized W-Band Meander-Line TWT Circuit

Vacuum electronic devices offer significant potential for increased power and performance at millimeter-wave frequencies. However, new approaches are required to reliably manufacture the miniature electromagnetic circuits used at these high frequencies. In this paper, we describe the design, fabrication, and testing of an innovative meander-line slow-wave structure for a W-band traveling-wave tube (TWT). The unique challenge of metallizing only the top of a high-aspect-ratio serpentine dielectric ridge using conventionally planar microfabrication techniques is overcome using a novel selective masking and metallization process. The procedure is demonstrated by fabricating a W-band meander-line circuit for a 10-W continuous-wave TWT. Cold-test S -parameter measurements are presented.

[1]  A. M. Madni,et al.  Microelectromechanical systems (MEMS): an overview of current state-of-the-art , 1998, 1998 IEEE Aerospace Conference Proceedings (Cat. No.98TH8339).

[2]  Larry R. Barnett,et al.  Intense wideband terahertz amplification using phase shifted periodic electron-plasmon coupling , 2008 .

[3]  M. Afsar,et al.  A novel W-band spectrometer for dielectric measurements , 2000, IMS 2000.

[4]  Andrew A. Bettiol,et al.  ION BEAM LITHOGRAPHY AND NANOFABRICATION: A REVIEW , 2005 .

[5]  L.M. Earley,et al.  Beam Line Design, Beam Alignment Procedure, and Initial Results for the$W$-Band Gain Experiment at Los Alamos , 2006, IEEE Transactions on Plasma Science.

[6]  Weileun Fang,et al.  A three-dimensional microfabrication technology on highly structured surfaces , 2007 .

[7]  Holger Becker,et al.  Hot embossing as a method for the fabrication of polymer high aspect ratio structures , 2000 .

[8]  Christine H. Tsau.  Fabrication and characterization of wafer-level gold thermocompression bonding , 2003 .

[9]  Andre Bossche,et al.  New photoresist coating method for 3-D structured wafers , 2000 .

[10]  Gun-Sik Park,et al.  Investigations on a microfabricated FWTWT oscillator , 2005, IEEE Transactions on Electron Devices.

[11]  G. Kovacs.  Micromachined Transducers Sourcebook , 1998 .

[12]  F. Ayazi,et al.  High aspect-ratio combined poly and single-crystal silicon (HARPSS) MEMS technology , 2000, Journal of Microelectromechanical Systems.

[13]  George Caryotakis,et al.  Design, fabrication and test of the klystrino , 2002 .

[14]  Abu Samah Zuruzi,et al.  High-aspect-ratio bulk micromachining of titanium , 2004, Nature materials.

[15]  John H. Booske,et al.  Plasma physics and related challenges of millimeter-wave-to-terahertz and high power microwave generationa) , 2008 .

[16]  Stella W. Pang,et al.  Controlling sidewall smoothness for micromachined Si mirrors and lenses , 1996 .

[17]  S. M. Spearing,et al.  Materials issues in microelectromechanical systems (MEMS) , 2000 .

[18]  Pasqualina M. Sarro,et al.  Spin , Spray coating and Electrodeposition of photoresist for MEMS structures – A comparison , 2000 .

[19]  H. Guckel,et al.  High-aspect-ratio micromachining via deep X-ray lithography , 1998, Proc. IEEE.

[20]  G. Fedder,et al.  Laminated high-aspect-ratio microstructures in a conventional CMOS process , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[21]  Hongrui Jiang,et al.  A selectively metallized, microfabricated W-band meander line TWT circuit , 2008, 2008 IEEE International Vacuum Electronics Conference.

[22]  Baruch Levush,et al.  Traveling-wave tube devices with nonlinear dielectric elements , 1998 .

[23]  D. van der Weide,et al.  Microfabricated W-band traveling wave tubes , 2005, 2005 Joint 30th International Conference on Infrared and Millimeter Waves and 13th International Conference on Terahertz Electronics.

[24]  S. Sengele,et al.  Overview of W-Band Traveling Wave Tube Programs , 2006, 2006 IEEE International Vacuum Electronics Conference held Jointly with 2006 IEEE International Vacuum Electron Sources.

[25]  K. N. Kocharyan,et al.  Quasi-optical waveguide W-band spectrometer for precision dielectric measurement of absorbing materials , 1998, 1998 Conference on Precision Electromagnetic Measurements Digest (Cat. No.98CH36254).

[26]  M.P. Larsson,et al.  Self-aligning MEMS in-line separable electrical connector , 2004, Journal of Microelectromechanical Systems.

[27]  Thomas Gessner,et al.  A Novel High Aspect Ratio Technology for MEMS Fabrication Using Standard Silicon Wafers , 2002 .

[28]  Mitsuhiro Shikida,et al.  Through-wafer interconnect technology for silicon , 2004 .

[29]  Ciprian Iliescu,et al.  Spray Coating of Photoresist for 3D Microstructures with Different Geometries , 2006 .

[30]  D.A. Gallagher,et al.  Accurate parametric modeling of folded waveguide circuits for millimeter-wave traveling wave tubes , 2005, IEEE Transactions on Electron Devices.

[31]  Ian Ronald Johnston,et al.  Recent advances in silicon etching for MEMS using the ASE™ process , 1999 .

[32]  D. W. van der Weide,et al.  Folded waveguide traveling-wave tube sources for terahertz radiation , 2003, IEEE Transactions on Plasma Science.