Extraction of Dielectric Constant and Loss Tangent Using New Rapid Plane Solver and Analytical Debye Modeling for Printed Circuit Boards

Dielectric material properties of printed circuit boards (PCBs) are needed by designers working in various areas such as signal integrity, antennas, and embedded RF components. Among many methods to extract the material properties, the full sheet resonance technique is commonly used on PCBs due to its simplicity. The disadvantage of this method is that an analytical equation is used to extract the dielectric constant, which is accurate only for lossless dielectrics. In this paper, a new method is presented to solve the inaccuracy issue of the extraction of the dielectric constant by applying customized electromagnetic simulation based on a new rapid plane solver instead of analytical equations. For PCB dielectrics, the loss tangent tends to be flat over several decades. The dielectric constant then varies as a function of frequency based on the Kronig-Kramers relations. This paper introduces a new Debye type of a model for the complex permittivity of such dielectrics. The parameters of the Debye model can be obtained analytically without requiring any curve fitting. The resulting Debye model can then be easily integrated in SPICE or a finite-difference time-domain simulator.

[1]  Chad Morgan.  Solutions for Causal Modeling and A Technique for Measuring Causal , 2008 .

[2]  Ali Akdagli,et al.  A Method for Determining the Dielectric Constant of Microwave PCB Substrates , 2008 .

[3]  A. Cangellaris,et al.  A methodology for incorporating metallization loss in the electromagnetic modeling of the power distribution network , 2008, 2008 IEEE-EPEP Electrical Performance of Electronic Packaging.

[4]  Chris Walker,et al.  Dielectric constant characterization using a numerical method for the microstrip ring resonator , 2004 .

[5]  Reinmut K. Hoffmann,et al.  Handbook of microwave integrated circuits , 1987 .

[6]  R. Morrison,et al.  RC Constant-Argument Driving-Point Admittances , 1959 .

[7]  J. Howell.  A Quick Accurate Method to Measure the Dielectric Constant of Microwave Integrated-Circuit Substrates (Short Papers) , 1973 .

[8]  Herbert Reichl,et al.  Closed‐form network representations of frequency‐dependent RLGC parameters , 2005, Int. J. Circuit Theory Appl..

[9]  Howard W. Johnson,et al.  High Speed Signal Propagation: Advanced Black Magic , 2003 .

[11]  Accuracy of dielectric constant measurement using the full-sheet-resonance technique IPC-TM-650 2.5.5.6 , 2002, Electrical Performance of Electronic Packaging,.

[12]  T.-M. Winkel,et al.  Extraction of /spl epsiv//sub r/(f) and tan/spl delta/(f) for printed circuit board insulators up to 30 GHz using the short-pulse propagation technique , 2005, IEEE Transactions on Advanced Packaging.

[14]  Istvan Novak,et al.  Impact of PCB Laminate Parameters on Suppressing Modal Resonances , 2008 .

[15]  T. Sarkar,et al.  Wideband frequency-domain characterization of FR-4 and time-domain causality , 2001, IEEE Transactions on Electromagnetic Compatibility.

[16]  Gerard V. Kopcsay,et al.  and for Printed Circuit Board Insulators Up to 30 GHz Using the Short-Pulse Propagation Technique , 2005 .

[17]  K. Tolsa,et al.  Dielectric characterization of printed wiring board materials using ring resonator techniques: a comparison of calculation models , 2006, IEEE Transactions on Dielectrics and Electrical Insulation.

[18]  L. Giacoletto,et al.  Frequency- and time-domain analysis of skin effects , 1996 .

[19]  T. K. Sarkar,et al.  On the modeling of conductor and substrate losses in multiconductor, multidielectric transmission line systems , 1991 .

[20]  Gilbert Strang,et al.  Introduction to applied mathematics , 1988 .

[21]  A. Semlyen,et al.  Rational approximation of frequency domain responses by vector fitting , 1999 .

[22]  Christer Svensson,et al.  Time domain modeling of lossy interconnects , 2001, ECTC 2001.