The effect of calcination and zirconia addition on HAp hot pressed materials

[1]  Z. Wzorek,et al.  The influence of calcination parameters on free calcium oxide content in natural hydroxyapatite , 2012 .

[2]  J. Venkatesan,et al.  A comparative study of thermal calcination and an alkaline hydrolysis method in the isolation of hydroxyapatite from Thunnus obesus bone , 2011, Biomedical materials.

[3]  M. Barreto,et al.  Tailoring the Microstructure of Sol–Gel Derived Hydroxyapatite/Zirconia Nanocrystalline Composites , 2010, Nanoscale research letters.

[4]  J. Freitas,et al.  Effect of the calcination temperature on the composition and microstructure of hydroxyapatite derived from human and animal bone , 2010 .

[5]  J. Venkatesan,et al.  Effect of Temperature on Isolation and Characterization of Hydroxyapatite from Tuna (Thunnus obesus) Bone , 2010, Materials.

[6]  S. Salehi,et al.  Fabrication and characterization of sol–gel derived hydroxyapatite/zirconia composite nanopowders with various yttria contents , 2010 .

[7]  A. Muñoz,et al.  Mechanical characteristics of porous hydroxyapatite/oxide composites produced by post-sintering hot isostatic pressing , 2009 .

[8]  F. A. Sheikh,et al.  Physiochemical characterizations of hydroxyapatite extracted from bovine bones by three different methods: extraction of biologically desirable Hap , 2008 .

[9]  Iis Sopyan,et al.  Densification behaviour of nanocrystalline hydroxyapatite bioceramics , 2008 .

[10]  M. Fathi,et al.  Preparation and bioactivity evaluation of bone-like hydroxyapatite nanopowder , 2008 .

[11]  F. Oktar,et al.  Composites of bovine hydroxyapatite (BHA) and ZnO , 2008 .

[12]  S. Ramesh,et al.  Properties of hydroxyapatite produced by annealing of bovine bone , 2007 .

[13]  Z. Evis.  Reactions in hydroxylapatite–zirconia composites , 2007 .

[14]  W. Tuan,et al.  Effect of zirconia addition on the microstructural evolution of porous hydroxyapatite , 2007 .

[15]  S. Kim,et al.  Consolidation and mechanical properties of nanostructured hydroxyapatite–(ZrO2 + 3 mol% Y2O3) bioceramics by high-frequency induction heat sintering , 2007 .

[16]  Z. Evis,et al.  Hot-pressed hydroxylapatite/monoclinic zirconia composites with improved mechanical properties , 2007 .

[17]  W. Pan,et al.  Reinforcement of Hydroxyapatite Bioceramic by Addition of Ti3SiC2 , 2006 .

[18]  K. Haberko,et al.  Natural hydroxyapatite - Its behaviour during heat treatment , 2006 .

[19]  N. Mostafa.  Characterization, thermal stability and sintering of hydroxyapatite powders prepared by different routes , 2005 .

[20]  Z. Paszkiewicz,et al.  Calcium Phosphate Materials Prepared from Precipitates with Various Calcium:Phosphorus Molar Ratios , 2005 .

[21]  S. Achour,et al.  Effect of Stabilised ZrO2, Al2O3 and TiO2 on Sintering of Hydroxyapatite , 2005 .

[22]  E. Adolfsson,et al.  Phase Analysis and Thermal Stability of Hot Isostatically Pressed Zirconia–Hydroxyapatite Composites , 2004 .

[23]  M Epple,et al.  A novel method to produce hydroxyapatite objects with interconnecting porosity that avoids sintering. , 2004, Biomaterials.

[24]  Anna Tampieri,et al.  Carbonated hydroxyapatite as bone substitute , 2003 .

[25]  A. Rapacz-Kmita,et al.  Effect of Chemical Composition and Morphology of Zirconia Particles on Properties of HAp-Zirconia Particulate Composites , 2001 .

[26]  C. Piconi,et al.  Zirconia as a ceramic biomaterial. , 1999, Biomaterials.

[27]  L. Hermansson,et al.  Hydroxyapatite-alumina composites and bone-bonding. , 1995, Biomaterials.

[28]  K. Niihara,et al.  A fracture mechanics analysis of indentation-induced Palmqvist crack in ceramics , 1983 .