Beam Tests of Cold-formed Steel Built-up Sections with Web Perforations

[1]  N. E. Shanmugam.  Openings in Thin-Walled steel structures , 1997 .

[2]  Teoman T Peköz,et al.  Direct Strength Prediction of Cold-formed Steel Members Using Numerical Elastic Buckling Solutions , 1998 .

[3]  N. E. Shanmugam,et al.  Design for openings in cold-formed steel channel stub columns , 2001 .

[4]  N. E. Shanmugam,et al.  Design for openings in equal-angle cold-formed steel stub columns , 2001 .

[5]  Dan Dubina,et al.  Recent research advances on the ECBL approach. Part II: interactive buckling of perforated sections , 2004 .

[6]  K S Sivakumaran,et al.  Flexural strength of cold-formed steel joists with reinforced web openings , 2006 .

[7]  B. Young,et al.  Design of Cold-Formed Steel Built-Up Closed Sections with Intermediate Stiffeners , 2008 .

[8]  Gregory J. Hancock,et al.  Development of the 2005 Edition of the Australian/New Zealand Standard for Cold-Formed Steel Structures AS/NZS 4600 , 2008 .

[9]  Kim J.R. Rasmussen,et al.  Isoparametric spline finite strip method for the bending of perforated plates , 2008 .

[10]  G. Eccher,et al.  Elastic buckling analysis of perforated thin-walled structures by the isoparametric spline finite strip method , 2008 .

[11]  Cristopher D. Moen,et al.  Elastic buckling of cold-formed steel columns and beams with holes , 2009 .

[12]  Benjamin W. Schafer,et al.  Extending Direct Strength Design to Cold-Formed Steel Beams with Holes , 2010 .

[13]  Zhanjie Li,et al.  Buckling Analysis of Cold-formed Steel Members with General Boundary Conditions Using CUFSM Conventional and Constrained Finite Strip Methods , 2010 .

[14]  Ben Young,et al.  Compression tests of cold-formed steel I-shaped open sections with edge and web stiffeners , 2012 .

[15]  Cristopher D. Moen,et al.  Experiments on Cold-Formed Steel C-Section Joists with Unstiffened Web Holes , 2013 .

[16]  Cristopher D. Moen,et al.  Finite strip elastic buckling solutions for thin-walled metal columns with perforation patterns , 2013 .

[17]  Ben Young,et al.  Design of cold-formed steel channels with stiffened webs subjected to bending , 2014 .