Nanoindentation of compliant materials using Berkovich tips and flat tips

Nanoindentation testing of compliant materials has recently attracted substantial attention. However, nanoindentation is not readily applicable to softer materials, as numerous challenges remain to be overcome. One key concern is the significant effect of adhesion between the indenter tip and the sample, leading to larger contact areas and higher contact stiffness for a given applied force relative to the Hertz model. Although the nano-Johnson–Kendall–Roberts (JKR) force curve method has demonstrated its capabilities to correct for errors due to adhesion, it has not been widely adopted, mainly because it works only with perfectly spherical tips. In this paper, we successfully extend the nano-JKR force curve method to include Berkovich and flat indenter tips by conducting numerical simulations in which the adhesive interactions are represented by an interaction potential and the surface deformations are coupled by using half-space Green’s functions discretized on the surface.

[1]  Jessica D. Kaufman,et al.  Time-dependent mechanical characterization of poly(2-hydroxyethyl methacrylate) hydrogels using nanoindentation and unconfined compression , 2008, Journal of materials research.

[2]  K. Johnson.  Contact Mechanics: Frontmatter , 1985 .

[3]  Andrea M. Hodge,et al.  The nanoindentation of soft tissue: Current and developing approaches , 2008 .

[4]  J. Israelachvili.  Intermolecular and surface forces , 1985 .

[5]  I. N. Sneddon.  The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile , 1965 .

[6]  E. Morgan,et al.  Measurement of fracture callus material properties via nanoindentation. , 2008, Acta biomaterialia.

[7]  K. Komvopoulos,et al.  Nanomechanical properties of energetically treated polyethylene surfaces , 2002 .

[8]  F. Borodich.  The Hertz-Type and Adhesive Contact Problems for Depth-Sensing Indentation , 2014 .

[9]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[10]  D. Ebenstein,et al.  Eliminating adhesion errors in nanoindentation of compliant polymers and hydrogels. , 2013, Journal of the mechanical behavior of biomedical materials.

[11]  A. Jagota,et al.  Adhesive contact between a rippled elastic surface and a rigid spherical indenter: from partial to full contact , 2011 .

[12]  Izhak Etsion,et al.  Adhesion in elastic-plastic spherical microcontact. , 2003, Journal of colloid and interface science.

[13]  Chung-Souk Han,et al.  On the time and indentation depth dependence of hardness, dissipation and stiffness in polydimethylsiloxane , 2013 .

[14]  A. Ngan,et al.  Nanoindentation Measurement of Mechanical Properties of Soft Solid Covered By a Thin Liquid Film , 2007 .

[15]  Etienne Barthel,et al.  Adhesive elastic contacts: JKR and more , 2008 .

[16]  G. Marshall,et al.  Nanoindentation of polydimethylsiloxane elastomers: Effect of crosslinking, work of adhesion, and fluid environment on elastic modulus , 2005 .

[17]  J. Vlassak,et al.  Determination of indenter tip geometry and indentation contact area for depth-sensing indentation experiments , 1998 .

[18]  Gao Yi-fei,et al.  INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS OF METALLIC MATERIALS , 2003 .

[19]  Alex A. Volinsky,et al.  Nanoindentation study of polydimethylsiloxane elastic modulus using Berkovich and flat punch tips , 2015 .

[20]  D. Tabor.  Surface Forces and Surface Interactions , 1977 .

[21]  Jagota,et al.  An Intersurface Stress Tensor , 1997, Journal of colloid and interface science.

[22]  John S. Villarrubia,et al.  Nanoindentation of polymers: an overview , 2001 .

[23]  A. Polycarpou,et al.  Adhesive contact based on the Lennard-Jones potential: a correction to the value of the equilibrium distance as used in the potential. , 2004, Journal of colloid and interface science.

[24]  B. Galanov,et al.  Non-direct estimations of adhesive and elastic properties of materials by depth-sensing indentation , 2008, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[25]  A. Volinsky,et al.  Comparison of the macroscale and microscale tests for measuring elastic properties of polydimethylsiloxane , 2015 .

[26]  B. Massicotte,et al.  Geometrical interpretation of the arc-length method , 1993 .

[27]  Elise M Buffinton,et al.  Comparison of mechanical testing methods for biomaterials: Pipette aspiration, nanoindentation, and macroscale testing. , 2015, Journal of the mechanical behavior of biomedical materials.

[28]  Nanshu Lu,et al.  Work of adhesion/separation between soft elastomers of different mixing ratios , 2015 .

[29]  K. Shull.  Contact mechanics and the adhesion of soft solids , 2002 .

[30]  A. Giannakopoulos,et al.  Analysis of Vickers indentation , 1994 .

[31]  M. Chaudhury,et al.  Thermal Fluctuations Limit the Adhesive Strength of Compliant Solids , 2006 .

[32]  Ke Tong,et al.  Comparison of Spherical and Flat Tips for Indentation of Hydrogels , 2015 .

[33]  M. Oyen.  Handbook of Nanoindentation: With Biological Applications , 2010 .

[34]  L. Pruitt,et al.  Adhesive forces significantly affect elastic modulus determination of soft polymeric materials in nanoindentation , 2007 .

[35]  Johnson,et al.  An Adhesion Map for the Contact of Elastic Spheres , 1997, Journal of colloid and interface science.

[36]  A. Volinsky,et al.  Obtaining full contact for measuring polydimethylsiloxane mechanical properties with flat punch nanoindentation , 2015, MethodsX.

[37]  E. Arzt,et al.  Surface detection in nanoindentation of soft polymers , 2007 .

[38]  K. Komvopoulos,et al.  Adhesion-induced instabilities in elastic and elastic–plastic contacts during single and repetitive normal loading , 2011 .

[39]  Dehua Yang,et al.  Nanoindentation method for determining the initial contact and adhesion characteristics of soft polydimethylsiloxane , 2005 .

[40]  N. Jennett,et al.  Higher accuracy analysis of instrumented indentation data obtained with pointed indenters , 2008 .

[41]  V. M. Muller,et al.  On the influence of molecular forces on the deformation of an elastic sphere and its sticking to a rigid plane , 1994 .

[42]  D. Ebenstein.  Nano-JKR force curve method overcomes challenges of surface detection and adhesion for nanoindentation of a compliant polymer in air and water , 2011 .

[43]  A. Jagota,et al.  Crack blunting and the strength of soft elastic solids , 2003, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[44]  L. Keer,et al.  The JKR-type adhesive contact problems for transversely isotropic elastic solids , 2014 .

[45]  A. Jagota,et al.  An easy-to-implement numerical simulation method for adhesive contact problems involving asymmetric adhesive contact , 2011 .

[46]  K. Wahl,et al.  A comparison of JKR-based methods to analyze quasi-static and dynamic indentation force curves. , 2006, Journal of colloid and interface science.

[47]  Jessica D. Kaufman,et al.  Surface detection errors cause overestimation of the modulus in nanoindentation on soft materials. , 2009, Journal of the mechanical behavior of biomedical materials.

[48]  W. Gerberich,et al.  Preparation and evaluation of tungsten tips relative to diamond for nanoindentation of soft materials , 2001 .

[49]  B. Galanov,et al.  The JKR-type adhesive contact problems for power-law shaped axisymmetric punches , 2014 .

[50]  Lisa A. Pruitt,et al.  Nanoindentation of biological materials , 2006 .

[51]  D. Ebenstein.  Nanoindentation of Soft Tissues and Other Biological Materials , 2010, Handbook of Nanoindentation with biological applications.

[52]  W. B. Emerson,et al.  A sensitive pyramidal-diamond tool for indentation measurements , 1939 .

[53]  A. E. Giannakopoulos,et al.  Analysis of Berkovich indentation , 1996 .

[54]  A. Boyde,et al.  Nanomechanical properties and mineral concentration in articular calcified cartilage and subchondral bone , 2003, Journal of anatomy.

[55]  M. C. Tracey,et al.  Mechanical characterization of bulk Sylgard 184 for microfluidics and microengineering , 2014 .

[56]  N. McGruer,et al.  A finite element model of loading and unloading of an asperity contact with adhesion and plasticity. , 2007, Journal of colloid and interface science.

[57]  Huajian Gao,et al.  Effects of contact shape on the scaling of biological attachments , 2005, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[58]  F. Borodich.  Hertz type contact problems for power-law shaped bodies , 2008 .

[59]  H. Matthias Deuschle,et al.  In situ indentation testing of elastomers , 2008 .

[60]  J. A. Greenwood,et al.  Adhesion of elastic spheres , 1997, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.