Realization of Plus-Type CCCIIs Based Voltage Mode Universal Filter

A voltage mode universal filter with three-input and one-output using only two plus type current conveyors (CCII+), two resistors and two capacitors is presented. By replacing each CCII+ and a resistor at x port with plus type second generation current controlled conveyor (CCCII+) a new filter is proposed. The proposed structure has low sensitivity performance, low component spread and minimum requirement of hardware. Experimental and PSPICE simulation results confirm the workability of the proposed structure.

[1]  J. Horng.  Novel universal voltage-mode biquad filter with three inputs and one output using only two current conveyors , 1996 .

[2]  東村 正巳.  A Realization of Voltage-Mode Biquads Using CCIIs , 1997 .

[3]  A. Fabre,et al.  Low power current-mode second-order bandpass IF filter , 1997 .

[4]  D. R. Frey,et al.  Log-domain filtering: An approach to current-mode fil-tering , 1993 .

[5]  J. Horng,et al.  New CCII-based voltage-mode universal biquadratic filter , 1997 .

[6]  M. Higashimura.  Realisation of voltage-mode biquads using CCIIs , 1991 .

[7]  Hua-Pin Chen,et al.  Universal capacitor-grounded voltage-mode filter with three inputs and a single output , 2003 .

[8]  Chun-Ming Chang,et al.  Universal voltage-mode filter with three inputs and one output using three current conveyors and one voltage follower , 1994 .

[9]  A. Fabre,et al.  High frequency applications based on a new current controlled conveyor , 1996 .

[10]  Jiun-Wei Horng,et al.  High-input impedance voltage-mode universal biquadratic filter using three plus-type CCIIs , 2001 .

[11]  J. A. Svoboda.  A comparison of RC op amp and RC current conveyor filters , 1993, Proceedings of 36th Midwest Symposium on Circuits and Systems.

[12]  Christofer Toumazou,et al.  Universal active filter using current conveyors , 1986 .

[13]  Serdar Ozoguz,et al.  Universal filter with three inputs using CCII , 1996 .

[14]  Yutaka Fukui,et al.  Universal filter using plus-type CCIIs , 1996 .

[15]  Shen-Iuan Liu.  High input impedance filters with low component spread using current-feedback amplifiers , 1995 .

[16]  F. Anday,et al.  Voltage transfer function synthesis using current conveyors , 1989 .

[17]  Shen-Iuan Liu,et al.  Voltage-mode universal filters using two current conveyors , 1997 .

[18]  V. Conclusion , .

[19]  Chun-Ming Chang,et al.  Universal voltage-mode filter with four inputs and one output using two CCII s , 1999 .