Numerical investigation of the separation behaviours of fine particles in large dense medium cyclones

Abstract Use of large dense medium cyclones (DMCs) is a potential trend in the coal industry but its usage is limited by the poor separation efficiency of fine particles. This paper presents a numerical study of the multiphase flows and performance of DMCs used for coal preparation by means of the two-fluid model. The validity of the model has been verified by various applications. It is used here to study the behaviours of fine particles in a 2-m DMC that is larger than the biggest DMCs reported thus far in the coal industry. The numerical results show that in the extra-large DMC, the poor separation efficiency of fine particles gets worse compared to that of a widely used 1-m DMC. This deficiency is found to be attributed to the strong vortexes developed and the asymmetrical separation zone that can be characterised by the correlation between pressure gradient and tangential velocity. Several modifications with respect to mounting degree, operational Head, conical section length, and inlet number are introduced to improve the performance of the 2-m DMC. It is shown that the separation efficiency of fine particles in the 2-m DMC can be better compared to the 1-m DMC by increasing the Head or conical section length, because such modifications reduce the asymmetrical separation zone and/or amount of vortexes.

[1]  Aibing Yu,et al.  Numerical study of particle–fluid flow in hydrocyclones with different body dimensions , 2006 .

[2]  M. P. Schwarz,et al.  Numerical and experimental investigations of wear in heavy medium cyclones , 1991 .

[3]  A. Yu,et al.  Discrete particle simulation of particle–fluid flow: model formulations and their applicability , 2010, Journal of Fluid Mechanics.

[4]  Peter N. Holtham,et al.  Numerical simulation of magnetite segregation in a dense medium cyclone , 2006 .

[5]  A. F. Najafi,et al.  Influence of geometry on separation efficiency in a hydrocyclone , 2009 .

[6]  Experimental Investigation of Flow Patterns in Cyclones with Conventional and Symmetrical Inlet Geometries , 2005 .

[7]  David Winfield,et al.  Performance comparison of a single and triple tangential inlet gas separation cyclone: A CFD Study , 2013 .

[8]  Aibing Yu,et al.  Particle scale modelling of the multiphase flow in a dense medium cyclone: Effect of fluctuation of solids flowrate , 2012 .

[9]  Mamoru Ishii,et al.  Two-fluid model and hydrodynamic constitutive relations , 1984 .

[10]  M. Brennan,et al.  CFD Simulations of Hydrocyclones with an Air Core: Comparison Between Large Eddy Simulations and a Second Moment Closure , 2006 .

[11]  Aibing Yu,et al.  Particle scale modelling of the multiphase flow in a dense medium cyclone: Effect of vortex finder outlet pressure , 2012 .

[12]  Aibing Yu,et al.  Computational study of the multiphase flow and performance of dense medium cyclones: Effect of body dimensions , 2011 .

[13]  Aibing Yu,et al.  Numerical analysis of hydrocyclones with different conical section designs , 2014 .

[14]  Pradip Kumar Banerjee,et al.  Critical evaluation of factors affecting the operation of dense medium cyclones treating medium coking coals , 2001 .

[15]  Aibing Yu,et al.  CFD–DEM study of the effect of particle density distribution on the multiphase flow and performance of dense medium cyclone , 2009 .

[16]  M. S. Brennan,et al.  Multiphase CFD simulations of dense medium and classifying hydrocyclones , 2003 .

[17]  Aibing Yu,et al.  CFD modeling and analysis of the multiphase flow and performance of dense medium cyclones , 2014 .

[18]  S. Ergun.  Fluid flow through packed columns , 1952 .

[19]  Jonathan James Davis.  A study of coal washing dense medium cyclones , 1987 .

[20]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[21]  Aibing Yu,et al.  Modeling the Multiphase Flow in a Dense Medium Cyclone , 2009 .

[22]  Christopher John Wood.  A performance model for coal-washing dense medium cyclones , 1990 .

[23]  Timothy J. Napier-Munn,et al.  Modelling and simulating dense medium separation processes — A progress report , 1991 .

[24]  Aibing Yu,et al.  Numerical study of liquid–gas–solid flow in classifying hydrocyclones: Effect of feed solids concentration , 2012 .

[25]  B. Govindarajan,et al.  Application of dense-medium in an enhanced gravity separator for fine coal cleaning , 2000 .

[26]  Aibing Yu,et al.  How to optimize design and operation of dense medium cyclones in coal preparation , 2014 .

[27]  C. J. Restarick,et al.  The effect of underflow/overflow ratio on dense medium cyclone operation , 1991 .

[28]  C. J. Barbee,et al.  Simulation of heavy medium cyclone performance , 2005 .

[29]  Aibing Yu,et al.  Numerical studies of the effects of medium properties in dense medium cyclone operations , 2009 .

[30]  Fábio Luı́s Fassani,et al.  A study of the effect of high inlet solids loading on a cyclone separator pressure drop and collection efficiency , 2000 .

[31]  Bo Wang,et al.  Computational investigation of the mechanisms of the “breakaway” effect in a dense medium cyclone , 2014 .

[32]  P.V.T Rao,et al.  Effect of increase in feed inlet pressure on feed rate of dense media cyclone , 2003 .

[33]  Aibing Yu,et al.  Prediction of the performance of dense medium cyclones in coal preparation , 2012 .

[34]  Aibing Yu,et al.  CFD-DEM modelling of multiphase flow in dense medium cyclones , 2009 .

[35]  Aibing Yu,et al.  Prediction of wear and its effect on the multiphase flow and separation performance of dense medium cyclone , 2014 .

[36]  Timothy J. Napier-Munn,et al.  A comprehensive CFD model of dense medium cyclone performance , 2007 .

[37]  Vijay S. Subramanian.  Measuring medium segregation in the dense-medium cyclone using gamma-ray tomography , 2002 .