Recent Advances in Axial-Flux Permanent-Magnet Machine Technology

This paper reviews the progress that has been made in the analysis and design of axial-flux permanent-magnet machines over the past decade, with particular attention to aspects such as electromagnetic and thermal modeling, materials, manufacturing, pulsating torque, and extended speed range. Comparisons with other machine types and applications are also reviewed.

[1]  F. Caricchi,et al.  Integral-Slot Versus Fractional-Slot Concentrated-Winding Axial-Flux Permanent-Magnet Machines: Comparative Design, FEA, and Experimental Tests , 2012, IEEE Transactions on Industry Applications.

[2]  A.J.A. Vandenput,et al.  Design, development and testing of a high-speed axial-flux permanent-magnet machine , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[3]  Thomas A. Lipo,et al.  Performance evaluation of an axial flux consequent pole PM motor using finite element analysis , 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..

[4]  F. Crescimbini,et al.  Advances in the design of TORUS machines , 1998, 1998 International Conference on Power Electronic Drives and Energy Systems for Industrial Growth, 1998. Proceedings..

[5]  Rong-Jie Wang,et al.  Analysis and Performance of Axial Flux Permanent-Magnet Machine With Air-Cored Nonoverlapping Concentrated Stator Windings , 2008, IEEE Transactions on Industry Applications.

[6]  Thomas A. Lipo,et al.  Design, Analysis, and Control of a Hybrid Field-Controlled Axial-Flux Permanent-Magnet Motor , 2010, IEEE Transactions on Industrial Electronics.

[7]  Y. Zhilichev,et al.  Three-dimensional analytic model of permanent magnet axial flux machine , 1998 .

[8]  Jerry L. Hudgins,et al.  Rotor losses in axial-flux permanent-magnet machines with non-overlapped windings , 2010 .

[9]  Weizhong Fei,et al.  Rotor Integrity Design for a High-Speed Modular Air-Cored Axial-Flux Permanent-Magnet Generator , 2011, IEEE Transactions on Industrial Electronics.

[10]  Roberto H. Moncada,et al.  Analysis of Negative-Saliency Permanent-Magnet Machines , 2010, IEEE Transactions on Industrial Electronics.

[11]  Thomas A. Lipo,et al.  Cogging torque minimization technique for multiple-rotor, axial-flux, surface-mounted-PM motors: alternating magnet pole-arcs in facing rotors , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..

[12]  R. Wallace,et al.  Design and Test of an Axial Flux Permanent-Magnet Machine With Field Control Capability , 2008, IEEE Transactions on Magnetics.

[13]  A. Hewitt,et al.  Magnetic flux density distribution in axial flux machine cores , 2005 .

[14]  J. Pyrhonen,et al.  Performance comparison between low-speed axial-flux and radial-flux permanent-magnet machines including mechanical constraints , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[15]  Dean J. Patterson,et al.  A comparison of radial and axial flux structures in electrical machines , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[16]  Y. Enomoto,et al.  Development of a high speed motor using amorphous metal cores , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[17]  M.A. Valenzuela,et al.  Cogging Torque Reduction in an Axial Flux PM Machine via Stator Slot Displacement and Skewing , 2007, IEEE Transactions on Industry Applications.

[18]  I. Csáki,et al.  Test Results of a Compact Disk-Type Motor/Generator Unit With Superconducting Bearings for Flywheel Energy Storage Systems With Ultra-Low Idling Losses , 2011, IEEE Transactions on Applied Superconductivity.

[19]  F. Caricchi,et al.  Analysis and comparison of a speed-dependant and a torque-dependant mechanical device for wide constant power speed range in AFPM starter/alternators , 2006, IEEE Transactions on Power Electronics.

[20]  F. Marignetti,et al.  Comparison of Axial Flux PM Synchronous Machines With Different Rotor Back Cores , 2010, IEEE Transactions on Magnetics.

[21]  Federico Caricchi,et al.  Nonconventional three-wheel electric vehicle for urban mobility , 2001, IEEE Trans. Veh. Technol..

[22]  Seung-Ki Sul,et al.  Design and Control of an Axial-Flux Machine for a Wide Flux-Weakening Operation Region , 2007, IEEE Transactions on Industry Applications.

[23]  J.A. Tapia,et al.  Design Consideration to Reduce Cogging Torque in Axial Flux Permanent-Magnet Machines , 2007, IEEE Transactions on Magnetics.

[24]  Markus Mueller,et al.  Structural analysis of low-speed axial-flux permanent-magnet machines , 2005 .

[25]  Thomas A. Lipo,et al.  Performance comparison of dual-rotor radial-flux and axial-flux permanent-magnet BLDC machines , 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..

[26]  Satoshi Ueno,et al.  Analysis and Control of Nonsalient Permanent Magnet Axial Gap Self-Bearing Motor , 2011, IEEE Transactions on Industrial Electronics.

[27]  Fabio Giulii Capponi,et al.  Axial-Flux Permanent-Magnet Generator for Induction Heating Gensets , 2010, IEEE Transactions on Industrial Electronics.

[28]  F. Caricchi,et al.  Active Output Voltage Regulation for an Ironless Axial-Flux PM Automotive Alternator with Electromechanical Flux Weakening , 2007, 2007 IEEE Industry Applications Annual Meeting.

[29]  T.J. Woolmer,et al.  Analysis of the Yokeless And Segmented Armature Machine , 2007, 2007 IEEE International Electric Machines & Drives Conference.

[30]  P. Pillay,et al.  Performance Assessment of a PM Wind Generator with Machined SMC Cores , 2007, 2007 IEEE International Electric Machines & Drives Conference.

[31]  G. Barakat,et al.  Quasi-3-D analytical modeling of the magnetic field of an axial flux permanent-magnet synchronous machine , 2005, IEEE Transactions on Energy Conversion.

[32]  F. Crescimbini,et al.  Compact wheel direct drive for EVs , 1996 .

[33]  P. Virtic,et al.  Analytical Analysis of Magnetic Field and Back Electromotive Force Calculation of an Axial-Flux Permanent Magnet Synchronous Generator With Coreless Stator , 2008, IEEE Transactions on Magnetics.

[34]  D. A. Howey,et al.  Measurement and CFD Prediction of Heat Transfer in Air-Cooled Disc-Type Electrical Machines , 2011, IEEE Transactions on Industry Applications.

[35]  T. Lipo,et al.  AXIAL FLUX PERMANENT MAGNET DISC MACHINES: A REVIEW , 2004 .

[36]  B. Chalmers,et al.  Electromagnetic design of axial-flux permanent magnet machines , 2004 .

[37]  F. Caricchi,et al.  Influence of magnetic wedges on the load performance of axial flux permanent magnet machines , 2010, IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society.

[38]  Fabrizio Marignetti,et al.  Electromagnetic Analysis of Axial-Flux Permanent Magnet Synchronous Machines With Fractional Windings With Experimental Validation , 2012, IEEE Transactions on Industrial Electronics.

[39]  F. Profumo,et al.  "Plastic" electric motors: a viable solution for axial flux machines , 2002, Industrial Electronics, 2002. ISIE 2002. Proceedings of the 2002 IEEE International Symposium on.

[40]  Z.Q. Zhu,et al.  Minimization of Cogging Torque in Axial-Flux Permanent-Magnet Machines: Design Concepts , 2007, IEEE Transactions on Magnetics.

[41]  S. Brisset,et al.  Design and Optimization of a Nine-Phase Axial-Flux PM Synchronous Generator With Concentrated Winding for Direct-Drive Wind Turbine , 2006, IEEE Transactions on Industry Applications.

[42]  Matteo Felice Iacchetti,et al.  Axial Flux PM Machines With Concentrated Armature Windings: Design Analysis and Test Validation of Wind Energy Generators , 2011, IEEE Transactions on Industrial Electronics.

[43]  Y. Enomoto,et al.  Development of an Axial Gap Motor With Amorphous Metal Cores , 2011, IEEE Transactions on Industry Applications.

[44]  J. Nerg,et al.  Concentrated winding axial flux permanent magnet motor with plastic bonded magnets and sintered segmented magnets , 2008, 2008 18th International Conference on Electrical Machines.

[45]  P. Barendse,et al.  A simple core structure for small axial-flux PMSGs , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[46]  L. Haydock,et al.  New brushless synchronous alternator , 2003 .

[47]  Mi-Ching Tsai,et al.  Design of a Miniature Axial-Flux Spindle Motor With Rhomboidal PCB Winding , 2006, IEEE Transactions on Magnetics.

[48]  Fabio Giulii Capponi,et al.  No-Load Performance of Axial Flux Permanent Magnet Machines Mounting Magnetic Wedges , 2012, IEEE Transactions on Industrial Electronics.

[49]  Thomas A. Lipo,et al.  Sizing equation analysis for field controlled PM machines: a unified approach , 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..

[50]  Cheng-Tsung Liu,et al.  Field-oriented control evaluations of a single-sided permanent magnet axial-flux motor for an electric vehicle , 2003 .

[51]  J. Pyrhonen,et al.  Modeling of axial flux permanent-magnet machines , 2004, IEEE Transactions on Industry Applications.

[52]  Thomas A. Lipo,et al.  A comparison of power density for axial flux machines based on general purpose sizing equations , 1999 .

[53]  Satoshi Ogasawara,et al.  A ferrite permanent magnet axial gap motor with segmented rotor structure for the next generation hybrid vehicle , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[54]  T.A. Lipo,et al.  A new axial flux surface mounted permanent magnet machine capable of field control , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[55]  W. Fei,et al.  A new axial flux permanent magnet Segmented-Armature-Torus machine for in-wheel direct drive applications , 2008, 2008 IEEE Power Electronics Specialists Conference.

[56]  L. Lai,et al.  Field Computation for an Axial Flux Permanent-Magnet Synchronous Generator , 2009, IEEE Transactions on Energy Conversion.

[57]  Pascal Brochet,et al.  Design and Optimization of a Nine-Phase Axial-Flux PM Synchronous Generator With Concentrated Winding for Direct-Drive Wind Turbine , 2006 .

[58]  P. Virtic,et al.  Torque Analysis of an Axial Flux Permanent Magnet Synchronous Machine by Using Analytical Magnetic Field Calculation , 2009, IEEE Transactions on Magnetics.

[59]  M.A. Khan,et al.  Prototyping a Composite SMC/Steel Axial-flux PM Wind Generator , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[60]  Jerry L. Hudgins,et al.  Design of a low-cost and efficient integrated starter-alternator , 2008 .

[61]  K. Mahkamov,et al.  2-D lumped-parameter thermal modelling of axial flux permanent magnet generators , 2008, 2008 18th International Conference on Electrical Machines.

[62]  Peter Sergeant,et al.  Optimized Design Considering the Mass Influence of an Axial Flux Permanent-Magnet Synchronous Generator With Concentrated Pole Windings , 2010, IEEE Transactions on Magnetics.

[64]  F. Caricchi,et al.  Axial-flux PM starter/alternator machine with a novel mechanical device for extended flux weakening capabilities , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[65]  F. Crescimbini,et al.  Permanent-magnet, direct-drive, starter/alternator machine with weakened flux linkage for constant-power operation over extremely wide speed range , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[66]  Roberto H. Moncada,et al.  Inverse-saliency PM motor performance under vector control operation , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[67]  F. Crescimbini,et al.  Experimental study on reducing cogging torque and core power loss in axial-flux permanent-magnet machines with slotted winding , 2002 .

[68]  Fabrizio Marignetti,et al.  Design of Axial Flux PM Synchronous Machines Through 3-D Coupled Electromagnetic Thermal and Fluid-Dynamical Finite-Element Analysis , 2008, IEEE Transactions on Industrial Electronics.

[69]  G. Heins,et al.  Cogging torque prediction for mass-produced axial flux PMSM stators , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[70]  M. Gabsi,et al.  3-D Formal Resolution of Maxwell Equations for the Computation of the No-Load Flux in an Axial Flux Permanent-Magnet Synchronous Machine , 2012, IEEE Transactions on Magnetics.

[71]  F. Crescimbini,et al.  Experimental study on reducing cogging torque and core power loss in axial-flux permanent-magnet machines with slotted winding , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[72]  F. Profumo,et al.  A comparison between the axial flux and the radial flux structures for PM synchronous motors , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[73]  F. Caricchi,et al.  Fractional-slot concentrated-winding axial-flux permanent-magnet machine with tooth-wound coils , 2012, 2012 XXth International Conference on Electrical Machines.

[74]  R. Nilssen,et al.  Performance Comparisons Among Radial-Flux, Multistage Axial-Flux, and Three-Phase Transverse-Flux PM Machines for Downhole Applications , 2010, IEEE Transactions on Industry Applications.

[75]  H. Tiegna,et al.  Analytical Modeling of the Open-Circuit Magnetic Field in Axial Flux Permanent-Magnet Machines With Semi-Closed Slots , 2012, IEEE Transactions on Magnetics.

[76]  Thomas A. Lipo,et al.  Torque quality and comparison of internal and external rotor axial flux surface-magnet disc machines , 2006, IEEE Transactions on Industrial Electronics.

[77]  Federico Caricchi,et al.  Compact permanent-magnet generator for hybrid vehicle applications , 2003 .

[78]  P. Tixador,et al.  Design of HTS Axial Flux Motor for Aircraft Propulsion , 2007, IEEE Transactions on Applied Superconductivity.

[79]  N. Bianchi,et al.  Rotor Losses Measurements in an Axial Flux Permanent Magnet Machine , 2011, IEEE Transactions on Energy Conversion.

[80]  E. Spooner,et al.  TORUS' : a slotless, toroidal-stator, permanent-magnet generator , 1992 .

[81]  Jacek F. Gieras,et al.  Axial Flux Permanent Magnet Brushless Machines , 2005 .

[82]  L. Dupré,et al.  Comparison of Nonoriented and Grain-Oriented Material in an Axial Flux Permanent-Magnet Machine , 2010, IEEE Transactions on Magnetics.

[83]  O. Honorati,et al.  Ironless Axial Flux PM Machine With Active Mechanical Flux Weakening For Automotive Applications , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[84]  W. Fei,et al.  Design and performance analysis of a high-speed air-cored axial-flux permanent-magnet generator with circular magnets and coils , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[85]  B.C. Mecrow,et al.  Axial Flux Motors Using Compacted Insulated Iron Powder and Laminations - Design and Test Results , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[86]  K. Sitapati,et al.  Performance comparisons of radial and axial field, permanent magnet, brushless machines , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[87]  A. Ahfock,et al.  Curvature-related eddy-current losses in laminated axial flux machine cores , 2005 .

[88]  F. Caricchi,et al.  Fractional-Slot Concentrated-Winding Axial-Flux Permanent-Magnet Machine With Core-Wound Coils , 2012, IEEE Transactions on Industry Applications.

[89]  Karuna Kalita,et al.  Active Axial-Magnetomotive Force Parallel-Airgap Serial Flux Magnetic Bearings , 2010, IEEE Transactions on Magnetics.