FDCCII‐based electronically tunable voltage‐mode biquad filter

In this work, a voltage-mode biquad filter realizing low-pass, band-pass and high-pass characteristics is presented. The proposed filter, which employs two FDCCIIs, two grounded capacitors and two NMOS transistors, provides electronic tunability with the control voltage applied to the gate. NMOS transistors act as linear resistor. Furthermore, the proposed circuit still enjoys realization using a low number of active and passive components, no requirement with the component choice conditions to realize specific filtering functions, high input impedance, and low active and passive sensitivities performance. Simulation results using SPICE program are given to show the performance of the filter and verify the theory. Copyright © 2010 John Wiley & Sons, Ltd.

[1]  Jiun-Wei Horng,et al.  High-input impedance voltage-mode universal biquadratic filter using three plus-type CCIIs , 2001 .

[2]  Hassan Elwan,et al.  A novel fully differential current conveyor and applications for analog VLSI , 2000 .

[3]  Hua-Pin Chen,et al.  A Versatile Universal Capacitor-Grounded Voltage-Mode Filter Using DVCCs , 2007 .

[4]  Hua-Pin Chen.  Voltage-mode FDCCII-based universal filters , 2008 .

[5]  Montree Kumngern,et al.  Electronically tunable high-input impedance voltage-mode universal biquadratic filter based on simple CMOS OTAs , 2010 .

[6]  O. Cicekoglu,et al.  Current-mode multifunction filters using a single FDCCII , 2009, 2009 International Conference on Electrical and Electronics Engineering - ELECO 2009.

[7]  Fuat Anday,et al.  Simulation of a novel current-mode universal filter using FDCCIIs , 2009 .

[8]  Gordon W. Roberts,et al.  All current-mode frequency selective circuits , 1989 .

[9]  Chun-Ming Chang,et al.  Single fully differential current conveyor biquad filters , 2003 .

[10]  M. Sagbas,et al.  An electronically tunable voltage-mode universal filter using two current conveyors , 2006, 2006 Ph.D. Research in Microelectronics and Electronics.

[11]  Yannis Tsividis,et al.  Continuous-time MOSFET-C filters in VLSI , 1986 .

[12]  Shahram Minaei,et al.  Electronically Tunable Current-Mode Universal biquad Filter Using Dual-X Current Conveyors , 2009, J. Circuits Syst. Comput..

[13]  Shahram Minaei,et al.  Input mapping algorithm for parallel transistor structures , 2009 .

[14]  Hua-Pin Chen.  Single FDCCII-based universal voltage-mode filter , 2009 .

[15]  Fırat Kaçar,et al.  Voltage mode universal filters employing single FDCCII , 2010 .

[16]  Kamil Vrba,et al.  A new electronically tunable voltage-mode active-C phase shifter using UVC and OTA , 2009, IEICE Electron. Express.

[17]  Chun-Ming Chang,et al.  Voltage-mode universal biquadratic filters with one input and five outputs using MOCCIIs , 2005, Comput. Electr. Eng..

[18]  Shahram Minaei,et al.  Universal current-mode filters and parasitic impedance effects on the filter performances , 2008 .

[19]  Shahram Minaei,et al.  Electronically tunable multi-input single-output voltage-mode filter , 2005, Proceedings of the 2005 European Conference on Circuit Theory and Design, 2005..

[20]  Hua-Pin Chen,et al.  Single FDCCII-Based Tunable Universal Voltage-Mode Filter , 2005 .

[21]  A. Toker,et al.  The dual-X current conveyor (DXCCII): a new active device for tunable continuous-time filters , 2003 .

[22]  Hua-Pin Chen,et al.  High-Input and Low-Output Impedance Voltage-Mode Universal DDCC and FDCCII Filter , 2008, IEICE Trans. Electron..

[23]  Chun-Ming Chang,et al.  Single FDCCII-based mixed-mode biquad filter with eight outputs , 2009 .

[24]  B. Wilson,et al.  Recent developments in current conveyors and current-mode circuits , 1990 .

[25]  Hakan Kuntman,et al.  Resistorless KHN biquad using an DDA (difference diffference amplifier) and two CCCIIs (controlled current conveyor) , 2005, Proceedings of the 2005 European Conference on Circuit Theory and Design, 2005..

[26]  Giuseppe Ferri,et al.  Low-Voltage Low-Power CMOS Current Conveyors , 2003 .