论文信息 - Electrochemical H2S sensor with H2SO4 pre-treated Nafion membrane as solid polymer electrolyte

Electrochemical H2S sensor with H2SO4 pre-treated Nafion membrane as solid polymer electrolyte

It is reported for the first time that the performance of the electrochemical H2S sensor with the Nation membrane pre-treated with the concentrated H2SO4 as the solid electrolyte is much more stable than that for the sensor with the Nation membrane without H2SO4 pretreatment. The sensitivity of the sensor is about 2.92 muA/ppm. The response time of the sensor is about 9 s. The detection limit is about 0.1 ppm. Therefore, this kind of the electrochemical H2S gas sensor may be desirable for the practical application.

Wei Xing | Yujiang Wang | Tianhong Lu | Chunbo Yu | Kaifeng Hua

[1] A. Kroll,et al. Electrochemical sensors for hydrogen and hydrogen sulfide determination , 1994 .

[2] Rosanna Toniolo,et al. Electrochemical Detection of Trace Hydrogen Sulfide in Gaseous Samples by Porous Silver Electrodes Supported on Ion-Exchange Membranes (Solid Polymer Electrolytes) , 1995 .

[3] Jeanne Burbank,et al. Atlas D-Equilibres Electrochimiques , 1964 .

[4] Karel Štulík,et al. Electrochemical sensors with solid polymer electrolytes , 1999 .

[5] L. Burke,et al. Novel view of the electrochemistry of gold , 1994 .

[6] Peter C. Hauser,et al. Electrochemical Sensor for the Detection of SO2 in the Low-ppb Range , 1999 .

[7] F. Opekar. An amperometric solid‐state sensor for Nitrogen dioxide based on a solid polymer electrolyte , 1992 .

[8] C. Liu,et al. A solid polymer electrolyte-bases electrochemical carbon monoxide sensor , 1994 .

[9] A. Bettelheim,et al. Conductivity response of porous electrodes supported on perfluorosulfonic acid membranes to acidic gas mixtures. , 1991, Analytical chemistry.

[10] C. Gardner,et al. Studies on ion-exchange membranes. Part 1. Effect of humidity on the conductivity of Nafion® , 1996 .