Coupled effect of poly vinyl alcohol and fly ash on mechanical characteristics of concrete

[1]  Imran Mehmood,et al.  Comparative Study of Supervised Machine Learning Algorithms for Predicting the Compressive Strength of Concrete at High Temperature , 2021, Materials.

[2]  Suniti Suparp,et al.  Compressive Strength Prediction via Gene Expression Programming (GEP) and Artificial Neural Network (ANN) for Concrete Containing RCA , 2021, Buildings.

[3]  Fazal E. Jalal,et al.  Computational AI prediction models for residual tensile strength of GFRP bars aged in the alkaline concrete environment , 2021, Ocean Engineering.

[4]  A. A. Awan,et al.  An Experimental and Empirical Study on the Use of Waste Marble Powder in Construction Material , 2021, Materials.

[5]  M. Kohail,et al.  Effect of curing regimes on chloride binding capacity of geopolymer , 2021 .

[6]  B. Tayeh,et al.  Mechanical Properties of Silica Fume Modified High-Volume Fly Ash Rubberized Self-Compacting Concrete , 2021, Sustainability.

[7]  Adeel Zafar,et al.  Sustainable use of fly-ash: Use of gene-expression programming (GEP) and multi-expression programming (MEP) for forecasting the compressive strength geopolymer concrete , 2021 .

[8]  A. Zafar,et al.  Geopolymer Concrete Compressive Strength via Artificial Neural Network, Adaptive Neuro Fuzzy Interface System, and Gene Expression Programming With K-Fold Cross Validation , 2021, Frontiers in Materials.

[9]  S. Czarnecki,et al.  Application of Novel Machine Learning Techniques for Predicting the Surface Chloride Concentration in Concrete Containing Waste Material , 2021, Materials.

[10]  L. Zeng,et al.  Experimental Investigation on the Effect of Rubber Powder on Mechanical Properties of PVA Fiber Concrete , 2021 .

[11]  Wesam Salah Alaloul,et al.  Systematic Review of Life Cycle Assessment and Life Cycle Cost Analysis for Pavement and a Case Study , 2021, Sustainability.

[12]  Wisal Ahmed,et al.  Predictive modeling for sustainable high-performance concrete from industrial wastes: A comparison and optimization of models using ensemble learners , 2021 .

[13]  P. Smarzewski,et al.  Effect of Short Fiber Reinforcements on Fracture Performance of Cement-Based Materials: A Systematic Review Approach , 2021, Materials.

[14]  Muhammad Farjad Iqbal,et al.  Sustainable utilization of foundry waste: Forecasting mechanical properties of foundry sand based concrete using multi-expression programming. , 2021, The Science of the total environment.

[15]  Haider M. Al-Baghdadi.  Experimental study on sulfate resistance of concrete with recycled aggregate modified with polyvinyl alcohol (PVA) , 2021 .

[16]  Rayed Alyousef,et al.  Prediction of Compressive Strength of Fly Ash Based Concrete Using Individual and Ensemble Algorithm , 2021, Materials.

[17]  Shazim Ali Memon,et al.  Compressive Strength of Fly-Ash-Based Geopolymer Concrete by Gene Expression Programming and Random Forest , 2021 .

[18]  K. M. Liew,et al.  Exploring mechanical performance of hybrid MWCNT and GNMP reinforced cementitious composites , 2021, Construction and Building Materials.

[19]  Muhammad Shafique,et al.  Sugarcane bagasse ash-based engineered geopolymer mortar incorporating propylene fibers , 2021 .

[20]  M. El-Hawary,et al.  Internal curing of recycled aggregates concrete , 2020 .

[21]  I. Chung,et al.  Characteristics of fly ash based concrete prepared with bio admixtures as internal curing agents , 2020 .

[22]  M. Kohail,et al.  Bond behavior between concrete and steel rebars for stressed elements , 2020 .

[23]  J. Olek,et al.  Autogenous healing performance of internal curing agent-based self-healing cementitious composite , 2020 .

[24]  V. Mechtcherine,et al.  Tailoring the crack-bridging behavior of strain-hardening cement-based composites (SHCC) by chemical surface modification of poly(vinyl alcohol) (PVA) fibers , 2020 .

[25]  N. Anand,et al.  Influence of Fiber on Shear Behavior of Concrete Exposed to Elevated Temperature , 2020 .

[26]  M. Jameel,et al.  A Review of Microscale, Rheological, Mechanical, Thermoelectrical and Piezoresistive Properties of Graphene Based Cement Composite , 2020, Nanomaterials.

[27]  Muhammad Nasir Amin,et al.  Applications of Gene Expression Programming for Estimating Compressive Strength of High-Strength Concrete , 2020 .

[28]  M. Kohail,et al.  The influence of ingredients on the properties of reactive powder concrete: A review , 2020 .

[29]  Mehtab Alam,et al.  An experimental study on effect of aluminum composite panel waste on performance of cement concrete , 2020 .

[30]  Muhammad Izhar Shah,et al.  Applications of Gene Expression Programming and Regression Techniques for Estimating Compressive Strength of Bagasse Ash based Concrete , 2020, Crystals.

[31]  P. Ravichandran,et al.  Characterisation of ultra-fine fly ash as sustainable cementitious material for masonry construction , 2020 .

[32]  Mini K. Madhavan,et al.  Mechanical and durability properties of hybrid fiber reinforced foam concrete , 2020, Construction and Building Materials.

[33]  Jiang Li,et al.  Novel microcapsules for internal curing of high-performance cementitious system , 2020, Scientific Reports.

[34]  Y. Zhuge,et al.  A comprehensive review on the mechanical properties of waste tire rubber concrete , 2020 .

[35]  M. Usman,et al.  Effect of Coconut Fiber Length and Content on Properties of High Strength Concrete , 2020, Materials.

[36]  Khairunisa Muthusamy,et al.  Mechanical properties of oil palm waste lightweight aggregate concrete with fly ash as fine aggregate replacement , 2020 .

[37]  A. Masum,et al.  Delaying time to corrosion initiation in concrete using brick aggregate as internal curing medium under adverse curing conditions , 2019 .

[38]  P. Ravichandran,et al.  Investigation on grinding impact of fly ash particles and its characterization analysis in cement mortar composites , 2019, Ain Shams Engineering Journal.

[39]  Jiaqing Wang,et al.  Investigation of properties and performances of Polyvinyl Alcohol (PVA) fiber-reinforced rubber concrete , 2018, Construction and Building Materials.

[40]  Shengwen Tang,et al.  Effect of silica fume and PVA fiber on the abrasion resistance and volume stability of concrete , 2017 .

[41]  K. Bisht,et al.  Evaluation of mechanical and durability properties of crumb rubber concrete , 2017 .

[42]  H. Mohamed,et al.  Effect of fly ash and silica fume on compressive strength of self-compacting concrete under different curing conditions , 2011 .