Geotechnical Solutions for Soil Improvement, Rapid Embankment Construction, and Stabilization of the Pavement Working Platform, Performance Assessment of Lime and Fly Ash Chemically Treated Subgrade

Chemical treatment and stabilization of subgrades is a long-standing method to construct working platforms and improve the support conditions for pavement systems. Lime, cement, and fly ash are common chemical stabilization agents and are often incorporated with subgrade materials to improve volumetric stability, freezethaw performance, and/or subgrade stiffness. Although laboratory test methods and design procedures are relatively well established, the long-term (5+ years) field performance characteristics of treated or stabilized subgrades is poorly documented and was the focus of this study. The main objectives of this project were as follows: • Document engineering properties (in situ strength/stiffness) and mineralogical/micro-structural characteristics of chemical stabilized subgrades, in comparison with natural subgrades at the same sites • Understand factors that contribute to long-term engineering behavior of stabilized subgrade Nine test sections were selected to assess engineering properties of old stabilized subgrades in Texas, Oklahoma, and Kansas. The selection of the test sites was based on the type of subgrade, availability of old construction records, and age. Subgrades at six of these sites were stabilized with lime and the other three with fly ash. Eight of these test sites were more than 10 years old, and one test site was about 5 years old. Eight sites consisted of flexible pavement supported on base and stabilized subgrade or just stabilized subgrade, and one site consisted of concrete pavement supported on cement treated base and stabilized subgrade Results from this study provide new information that should be of great interest to pavement designers dealing with selection of design parameters for chemically stabilized subgrade layers.

[1]  Thomas L. Brandon,et al.  Rapid Chemical Stabilization of Soft Clay Soils , 2007 .

[2]  Marshall B. Addison,et al.  Extending Durability of Lime Modified Clay Subgrades With Cement Stabilization , 2007 .

[3]  W H Zimpfer PLATE BEARING TESTS AND FLEXIBLE PAVEMENT DESIGN IN FLORIDA , 1961 .

[4]  Craig H. Benson,et al.  Soft subgrades' stabilization by using various fly ashes , 2006 .

[5]  Amy B. Cerato,et al.  Evaluation and Field Verification of Strength and Structural Improvement of Chemically Stabilized Subgrade Soil , 2008 .

[6]  Richard G. Thuma Green's Function Analysis of Pavement Deflections Due to Moving Wheel Loads. , 1995 .

[7]  S. Esterby American Society for Testing and Materials , 2006 .

[8]  Ekrem Seyman Laboratory evaluation of in-situ tests as potential quality control/quality assurance tools , 2003 .

[9]  Mark J. Thompson,et al.  Field Validation of Intelligent Compaction Monitoring Technology for Unbound Materials , 2007 .

[10]  H Von Quintus,et al.  DESIGN PAMPHLET FOR THE BACKCALCULATION OF PAVEMENT LAYER MODULI IN SUPPORT OF THE 1993 AASHTO GUIDE FOR THE DESIGN OF PAVEMENT STRUCTURES , 1997 .

[11]  Michael Hewitt,et al.  Innovation in Cement Stabilization of Airfield Subgrades , 2007 .

[12]  I. Diamond Quality assurance and/or quality control. , 1986, Archives of pathology & laboratory medicine.

[13]  Dallas N. Little,et al.  Evaluation of Structural Contribution of Lime Stabilization of Subgrade Soils in Mississippi , 2001 .

[14]  James L. Hanson,et al.  Ultrasonic Testing for Evaluation of Stabilized Mixtures , 2001 .

[15]  R B Smith,et al.  A FIELD STUDY OF IN SITU CALIFORNIA BEARING RATIO AND DYNAMIC CONE PENETROMETER TESTING FOR ROAD SUBGRADE INVESTIGATIONS , 1983 .

[16]  MECHANISTIC DESIGN CONCEPTS FOR STABILIZED BASE PAVEMENTS , 1986 .

[17]  Iowa. Highway Division Standard specifications for highway and bridge construction. , 2012 .

[18]  Mustaque Hossain,et al.  Use of Falling Weight Deflectometer and Dynamic Cone Penetrometer in Pavement Evaluation , 1999 .

[19]  R. Parsons,et al.  Field performance of fly ash stabilised subgrades , 2005 .

[20]  Alex K. Apeagyei,et al.  Evaluation of the Lightweight Deflectometer for In-Situ Determination of Pavement Layer Moduli , 2010 .

[21]  R. Grim,et al.  A QUICK TEST TO DETERMINE LIME REQUIREMENTS FOR LIME STABILIZATION , 1966 .

[22]  R Brazetti,et al.  PERFORMANCE RESULTS OF SOIL STABILIZATION PROGRAMS IN LATIN AMERICA , 2001 .

[23]  J Myre,et al.  THE USE OF DYNAMIC CONE PENETROMETER (DCP) FOR ROAD STRENGTHENING DESIGN IN NORWAY , 1994 .

[24]  H A Todres,et al.  USE OF CEMENT KILN DUST IN STABILIZING CLAY SOILS , 1996 .

[25]  Dallas N. Little Assessment of In Situ Structural Properties of Lime-Stabilized Clay Subgrades , 1996 .

[26]  Y Richard Kim,et al.  TEMPERATURE CORRECTION OF DEFLECTIONS AND BACKCALCULATED ASPHALT CONCRETE MODULI , 1995 .

[27]  R. Parsons,et al.  USE OF CEMENT KILN DUST FOR SUBGRADE STABILIZATION , 2004 .

[28]  J G Laguros,et al.  STABILIZATION OF EXISTING SUBGRADES TO IMPROVE CONSTRUCTIBILITY DURING INTERSTATE PAVEMENT RECONSTRUCTION , 1997 .

[29]  D Johnson,et al.  IN SITU FOUNDATION CHARACTERIZATION USING THE DYNAMIC CONE PENETROMETER. FINAL REPORT , 1993 .

[30]  Tien Fang Fwa,et al.  The Handbook of Highway Engineering , 2005 .

[31]  R. Lytton,et al.  Design of Pavements on Expansive Soils , 2006 .

[32]  Tom Scullion,et al.  IDENTIFICATION OF THE STRUCTURAL BENEFITS OF BASE AND SUBGRADE STABILIZATION , 1995 .

[33]  J. L. Daniels,et al.  Cold Weather Subgrade Stabilization , 2007 .

[34]  Steve L. Webster,et al.  FORCE PROJECTION SITE EVALUATION USING THE ELECTRIC CONE PENETROMETER (ECP) AND THE DYNAMIC CONE PENETROMETER (DCP) , 1994 .

[35]  G. Youdale Guide to stabilisation in roadworks , 1998 .

[36]  Bujang B. K. Huat,et al.  Evaluation, Selection and Assessment of Guidelines for Chemical Stabilization of Tropical Residual Soils , 2008 .

[37]  Ryan R Berg,et al.  Geotechnical Solutions for Soil Improvement, Rapid Embankment Construction, and Stabilization of the Pavement Working Platform , 2012 .

[38]  Pranshoo Solanki,et al.  Engineering Behavior and Microstructure of Soil Stabilized with Cement Kiln Dust , 2007 .

[39]  Russell L. Buhler,et al.  Stabilization of Oklahoma Expansive Soils using Lime and Class C Fly Ash , 2007 .

[40]  Robert D Layton,et al.  EVALUATION OF ALTERNATE SURFACINGS FOR FOREST ROADS , 1987 .

[41]  M Y Shahin,et al.  COMPARISON OF TWO FALLING WEIGHT DEFLECTOMETER DEVICES, DYNATEST 8000 AND KUAB 2M-FWD , 1989 .

[42]  Sirous Alavi,et al.  Falling Weight Deflectometer Usage , 2008 .

[43]  Raymond S. Rollings,et al.  Geotechnical Materials in Construction , 1995 .

[44]  Tom Scullion,et al.  GUIDELINES FOR MIXTURE DESIGN AND THICKNESS DESIGN FOR STABILIZED BASES AND SUBGRADES , 1995 .

[45]  Halil Ceylan,et al.  Fly Ash Soil Stabilization for Non-Uniform Subgrade Soils , 2005 .

[46]  Braja M. Das,et al.  Evaluation of Chemical Modifiers and Stabilizers for Chemically Active Soils—Clays , 2001 .

[47]  Long-Term Performance of a Highway Subgrade Stabilized with an Atmospheric Fluidized Bed Combustion Material , 1999 .

[48]  Dallas N. Little,et al.  Stabilization of Pavement Subgrades and Base Courses with Lime , 1995 .

[49]  A. M. DiGioia,et al.  Fly ash design manual for road and site applications , 1986 .

[50]  Robert D Layton,et al.  AN OVERVIEW OF ALTERNATE SURFACINGS FOR FOREST ROADS , 1987 .

[51]  Barry R. Christopher,et al.  Geotechnical Aspects of Pavements , 2006 .

[52]  Sibel Pamukcu,et al.  Soil Stabilization and Grouting , 1991 .

[53]  Tommy C. Hopkins,et al.  Modification of Highway Soil Subgrades , 1995 .

[54]  Steve L. Webster,et al.  DESCRIPTION AND APPLICATION OF DUAL MASS DYNAMIC CONE PENETROMETER. FINAL REPORT , 1992 .

[55]  Jianchao Li,et al.  Incorporating Subgrade Lime Stabilization into Pavement Design , 2000 .

[56]  Tommy C. Hopkins,et al.  Long-Term Benefits of Stabilizing Soil Subgrades , 2002 .

[57]  Dallas N. Little,et al.  Review of Stabilization of Clays and Expansive Soils in Pavements and Lightly Loaded Structures—History, Practice, and Future , 2002 .

[58]  Chulmin Jung,et al.  Post-Construction Evaluation of Lime-Treated Soils , 2007 .

[59]  D E Newcomb,et al.  MEASURING IN SITU MECHANICAL PROPERTIES OF PAVEMENT SUBGRADE SOILS , 1999 .

[60]  R J McLaren,et al.  FLY ASH DESIGN MANUAL FOR ROAD AND SITE APPLICATIONS. VOLUME II: SLURRIED PLACEMENT , 1986 .

[61]  Moshe Livneh,et al.  Uncertainty Associated with Pre-Defined Correlative Expressions of Various In-Situ Test Outputs , 2007 .

[62]  David White,et al.  Comparison of Light Weight Deflectometer Measurements for Pavement Foundation Materials , 2009 .

[63]  Moshe Livneh,et al.  Quality Assessment During Road Formation and Foundation Construction: Use of Falling-Weight Deflectometer and Light Drop Weight , 2001 .

[64]  H F Southgate Sensitivity Study of 1986 AASHTO Guide for Design of Pavement Structures , 1991 .

[65]  C. Benson,et al.  CASE STUDY OF SUBGRADE STABILIZATION USING FLY ASH: STATE HIGHWAY 32, PORT WASHINGTON, WISCONSIN , 2004 .

[66]  H. Yoon,et al.  Cementation Effects on Rigid-Soft Particle Mixtures , 2007 .

[67]  W. Adaska,et al.  CONTROL OF REFLECTIVE CRACKING IN CEMENT STABILIZED PAVEMENTS , 2004 .

[68]  J A Epps,et al.  SOIL STABILIZATION IN PAVEMENT STRUCTURES, A USER'S MANUAL. VOLUME II: MIXTURE DESIGN CONSIDERATIONS. IMPLEMENTATION PACKAGE , 1979 .

[69]  Darren Hazlett,et al.  Sulfate-Bearing Soils: Problems with Calcium-Based Stabilizers , 1996 .

[70]  Hamad I. Al-Abdul Wahhab,et al.  Performance of a stabilized marl base: a case study , 1998 .

[71]  E A Snedker,et al.  M40 - LIME STABILISATION EXPERIENCES , 1996 .