Prediction of time-evolving sand ripples in shelf seas

The ability to predict the presence and physical properties of small-scale sand ripples on the sea bed is important for determining the bed roughness felt by currents and waves, for sediment transport applications, and for acoustic applications. A fully time-evolving model is presented for predicting the height, length and orientation of sand ripples generated by currents, waves or both, which includes processes dealing with threshold of motion, ripple wash-out and biological degradation. We believe that this is currently the only predictor to feature all these properties, and is thus more widely applicable to shelf seas than other more sophisticated, but less comprehensive, methods. Tests against a large data-set of observations using an Acoustic Ripple Profiler at a site on the east coast of England, where ripples are generated by both tidal currents and waves, showed that the predictor captures most of the main features observed. A modified criterion for the wave/current dominance in the prediction equations improved some aspects of the agreement. The properties of current-generated ripples are predicted accurately, but the wavelength, and to a lesser extent the height, of wave-generated ripples show some under-prediction. Ripple orientations are modelled in an approximate way, but the main features of the observed orientations are captured. The bio-degradation feature of the predictor could not be tested with this data-set.

[1]  O. Madsen,et al.  Movable bed roughness in unsteady oscillatory flow , 1982 .

[2]  B. Camenen.  Estimation of the wave-related ripple characteristics and induced bed shear stress , 2009 .

[3]  R. Wheatcroft,et al.  Temporal variation in bed configuration and one-dimensional bottom roughness at the mid-shelf STRESS site , 1994 .

[4]  P. Traykovski.  Observations of wave orbital scale ripples and a nonequilibrium time‐dependent model , 2007 .

[5]  Richard Soulsby,et al.  Prediction of Ripple Properties in Shelf Seas. Mark 2 Predictor for Time Evolution (CD-ROM) , 2005 .

[6]  Hitoshi Tanaka,et al.  Geometry of Sand Ripples due to Combined Wave-Current Flows , 1996 .

[7]  J. H. Berg,et al.  A New Bedform Stability Diagram, with Emphasis on the Transition of Ripples to Plane Bed in Flows over Fine Sand and Silt , 2009 .

[8]  A. Khelifa,et al.  Prediction of Sand Ripple Geometry Under Waves and Currents , 2000 .

[9]  J. S. Doucette,et al.  Response of sand ripples to change in oscillatory flow , 2006 .

[10]  C. Amos,et al.  Predicting ripple geometry and bed roughness under combined waves and currents in a continental shelf environment , 1998 .

[11]  Sand Movement Due to Wave-Current Combined Motion , 1984 .

[12]  L. Wright,et al.  Predicting ripple roughness and sand resuspension under combined flows in a shoreface environment , 1996 .

[13]  Alex E. Hay,et al.  Occurrence and orientation of anorbital ripples in near‐shore sands , 2009 .

[14]  S. Wright,et al.  SAND TRANSPORT ON STEEPLY SLOPING PLANE AND RIPPLED BEDS , 2003 .

[15]  Patricia Wiberg.  A Simple, Regional Characterization of Wave-Generated Ripple Geometry and Orientation , 2005 .

[16]  P. Nielsen.  Coastal Bottom Boundary Layers and Sediment Transport , 1992 .

[17]  R. Soulsby,et al.  Threshold of Sediment Motion in Coastal Environments , 1997 .

[18]  G. R. Mogridge,et al.  Geometry prediction for wave-generated bedforms , 1994 .

[19]  D. Smith,et al.  Transient ripples in oscillatory flows , 2005 .

[20]  Jaco H. Baas,et al.  Dimensional analysis of current ripples in recent and ancient depositional environments , 1993 .

[21]  C. Lauchlan,et al.  Experimental investigation of bed-load and suspended-load transport over weirs , 2004 .

[22]  B. Butman,et al.  Sediment movement along the U.S. east coast continental shelf—I. Estimates of bottom stress using the Grant-Madsen model and near-bottom wave and current measurements , 1990 .

[23]  L. Rijn.  Principles of sediment transport in rivers, estuaries and coastal seas , 1993 .

[24]  H. Clifton,et al.  Wave-formed structures and paleoenvironmental reconstruction , 1984 .

[25]  D. Huntley,et al.  Ripple generation under the combined influences of waves and currents on the Canadian continental shelf , 1988 .

[26]  J. F. A. Sleath,et al.  Sea bed mechanics , 1984 .

[27]  C. Harris,et al.  Ripple geometry in wave‐dominated environments , 1994 .

[28]  James D. Irish,et al.  Geometry, migration, and evolution of wave orbital ripples at LEO-15 , 1999 .

[29]  P. Nielsen.  Dynamics and geometry of wave‐generated ripples , 1981 .

[30]  J. Malarkey,et al.  A simple procedure for calculating the mean and maximum bed stress under wave and current conditions for rough turbulent flow based on method , 2012, Comput. Geosci..