Application of air cooled pipes for reduction of early age cracking risk in a massive RC wall

Abstract The construction of massive concrete structures is often conditioned by the necessity of phasing casting operations in order to avoid excessive heat accumulation due to cement hydration. To accelerate construction and allow larger casting stages (usually increasing lift height), it is usual to adopt internal cooling strategies based on embedding water pipes into concrete, through which water is circulated to minimize temperature development. The present paper reports the use of horizontally placed ventilated prestressing ducts embedded in a massive concrete wall for the same purpose, in line with a preliminary Swedish proposal made in the 1990s. The application herein reported is a holistic approach to the problem under study, encompassing extensive laboratory characterization of the materials (including a technique developed for continuous monitoring of concrete E-modulus since casting), in situ monitoring of temperatures and strains, and 3D thermo-mechanical simulation using the finite element method. Based on the monitored/simulated results, it is concluded that the air-cooling system is feasible and can effectively reduce early cracking risk of concrete, provided adequate planning measures are taken.

[1]  Mats Emborg,et al.  Thermal stresses in concrete structures at early ages , 1989 .

[2]  Farid Benboudjema,et al.  Numerical analysis of the thermal active restrained shrinkage ring test to study the early age behavior of massive concrete structures , 2011 .

[3]  Yu Hu,et al.  Thermal analysis of mass concrete embedded with double-layer staggered heterogeneous cooling water pipes , 2012 .

[4]  J. Zreiki,et al.  Early-age behaviour of concrete in massive structures, experimentation and modelling , 2010 .

[5]  Neville Fowkes,et al.  Modeling the Cooling of Concrete by Piped Water , 2009 .

[6]  Gilles Chanvillard,et al.  Determining the apparent activation energy of concrete Ea: numerical simulations of the heat of hydration of cement , 2002 .

[7]  Nicholas J. Carino,et al.  The Maturity Method: Theory and Application , 1984 .

[8]  Moon C Won,et al.  Thermal Strain and Drying Shrinkage of Concrete Structures in the Field , 2010 .

[9]  Moon C Won,et al.  In situ measurement of coefficient of thermal expansion in hardening concrete and its effect on thermal stress development , 2013 .

[10]  Yanyong Xiang,et al.  Thermal–mechanical analysis of a newly cast concrete wall of a subway structure , 2005 .

[11]  Machida Nobuhiro,et al.  Nonlinear thermal stress analysis of a massive concrete structure , 1987 .

[12]  Olivier Coussy,et al.  Strength growth as chemo-plastic hardening in early age concrete , 1996 .

[13]  Randy J. James,et al.  THERMAL ENGINEERING FOR THE CONSTRUCTION OF LARGE CONCRETE ARCH DAMS , 2003 .

[14]  Chongjiang Du.  Dam Construction--Concrete Temperature Control Using Fly Ash , 1996 .

[15]  J. Jonasson,et al.  Estimation of the risk for early thermal cracking for SCC containing fly ash , 2012 .

[16]  Rui Faria,et al.  Identification of early-age concrete temperatures and strains : monitoring and numerical simulation , 2009 .

[17]  S. Bernander.  Practical measures to avoiding early age thermal cracking in concrete structures , 1998 .

[18]  Robert Otto Rasmussen,et al.  CONCRETE TEMPERATURE MODELING AND STRENGTH PREDICTION USING MATURITY CONCEPTS IN THE FHWA HIPERPAV SOFTWARE , 2001 .

[19]  H. Hedlund,et al.  Air cooling of concrete by means of embedded cooling pipes-Part I: Laboratory tests of heat transfer coefficients , 1998 .

[20]  Marcos M. Silvoso,et al.  Numerical simulation of dam construction using low-CO2-emission concrete , 2010 .

[21]  Masami Ishikawa.  Thermal stress analysis of a concrete dam , 1991 .

[22]  Hongwei Xie,et al.  Influence of the different pipe cooling scheme on temperature distribution in RCC arch dams , 2005 .

[23]  Rui Faria,et al.  Modelling of concrete at early ages: Application to an externally restrained slab , 2006 .

[24]  Luc Taerwe,et al.  Specific heat and thermal diffusivity of hardening concrete , 1995 .

[25]  Zdeněk P. Bažant,et al.  Mathematical modeling of creep and shrinkage of concrete , 1988 .

[26]  C. Boulay,et al.  Mesure des déformations du béton au jeune âge , 1993 .

[27]  Rui Faria,et al.  Measurement of concrete E-modulus evolution since casting: A novel method based on ambient vibration , 2010 .

[28]  Jin-Keun Kim,et al.  Heat Transfer Coefficient in Flow Convection of Pipe-Cooling System in Massive Concrete , 2011 .

[29]  P. F. Hansen,et al.  MATURITY COMPUTER FOR CONTROLLED CURING AND HARDENING OF CONCRETE , 1977 .

[30]  I. F. Blinov,et al.  Field studies of the temperature regime and stress state of the concrete in arch dams subjected to various methods of cooling , 1980 .

[31]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[32]  Ian F. C. Smith,et al.  Separation of thermal and autogenous deformation at varying temperatures using optical fiber sensors , 2007 .

[33]  R. Springenschmid,et al.  Prevention of thermal cracking in concrete at early ages : state-of-the-art report presented by RILEM Technical Committee 119, Avoidance of Thermal Cracking in Concrete at Early Ages , 1998 .

[34]  Dale P. Bentz,et al.  Transient plane source measurements of the thermal properties of hydrating cement pastes , 2007 .

[35]  Miguel Azenha.  Numerical simulation of the structural behaviour of concrete since its early ages , 2012 .

[36]  C. Boulay,et al.  Evolution du coefficient de dilatation thermique du béton en fonction de sa maturité aux tout premiers âges , 1994 .

[37]  A. P. Dolmatov,et al.  Temperature control of the massive concrete of the Krasnoyarsk hydroelectric station dam , 1968 .

[38]  A. Neville,et al.  Integrated View of Shrinkage Deformation , 1997 .

[39]  G. De Schutter,et al.  Minimisation of early age thermal cracking in a J-shaped non-reinforced massive concrete quay wall , 2004 .

[40]  Somnuk Tangtermsirikul,et al.  A model for predicting thermal conductivity of concrete , 2009 .

[41]  F. Cussigh,et al.  Using the maturity method in concrete cracking control at early ages , 2004 .

[42]  Kenneth Roush,et al.  Cooling Concrete with Embedded Pipes , 2005 .

[43]  Jin Keun Kim,et al.  Thermal analysis of hydration heat in concrete structures with pipe-cooling system , 2001 .

[44]  Antonio Nanni,et al.  Concrete Precooling Method by Means of Dry Ice , 1993 .

[45]  Farid Benboudjema,et al.  Early-age behaviour of concrete nuclear containments , 2008 .

[46]  Fernando A. Branco,et al.  Heat of Hydration Effects in Concrete Structures , 1992 .

[47]  Rui Faria,et al.  Temperatures and stresses due to cement hydration on the R/C foundation of a wind tower—A case study , 2008 .

[48]  Jeff St. John.  Construction of the Hoover Dam Bypass , 2011 .

[49]  A W Beeby,et al.  CONCISE EUROCODE FOR THE DESIGN OF CONCRETE BUILDINGS. BASED ON BSI PUBLICATION DD ENV 1992-1-1: 1992. EUROCODE 2: DESIGN OF CONCRETE STRUCTURES. PART 1: GENERAL RULES AND RULES FOR BUILDINGS , 1993 .

[50]  Ric Maggenti,et al.  From Passive to Active Thermal Control , 2007 .

[51]  de R René Borst,et al.  Finite-Element Modeling of Deformation and Cracking in Early-Age Concrete , 1994 .

[52]  M. Azenha,et al.  Continuous monitoring of concrete E-modulus since casting based on modal identification : a case study for in-situ application , 2012 .

[53]  Jin-keun Kim,et al.  An experimental study on thermal conductivity of concrete , 2003 .

[54]  Bart Craeye,et al.  Early age behaviour of concrete supercontainers for radioactive waste disposal , 2009 .