Cellular ceramics by direct foaming of emulsified ceramic powder suspensions

A new direct foaming method to produce macroporous cellular ceramics using surfactants as foam stabilizers is presented. The technology relies on the transition of a stabilized aqueous ceramic powder suspension containing a homogeneously dispersed alkane or air-alkane phase into cellular ceramics. The stabilization of the powder suspension and the emulsion is realized with particular emphasis on the interaction of both mechanisms providing enduring stability of the system up to high foaming degrees. Anionic, cationic, and nonionic surfactants were studied with their stabilization and foaming effects. The presence and influence of air bubbles was proved to be of negligible importance. Foaming is then provided by the evaporation of the emulsified alkane droplets, leading to the expansion of the emerging foam and giving rise to solids foams with cell sizes from 0.5 to 3 mm and porosities up to 97.5% after sintering. The microstructures of these filigree ceramics are stable and rigid with dense struts and uniform distributions of the solid phase and the porosity.

[1]  L. Gauckler,et al.  Processing of Particle‐Stabilized Wet Foams Into Porous Ceramics , 2007 .

[2]  L. Gauckler,et al.  Tailoring the microstructure of particle-stabilized wet foams. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[3]  A. R. Boccaccini,et al.  The surface functionalization of 45S5 Bioglass®-based glass-ceramic scaffolds and its impact on bioactivity , 2006, Journal of materials science. Materials in medicine.

[4]  F. Patcas,et al.  Keramische Schwämme – Anwendungspotenzial monolithischer Netzstrukturen als katalytische Packungen , 2006 .

[5]  André R. Studart,et al.  Processing Routes to Macroporous Ceramics: A Review , 2006 .

[6]  André R Studart,et al.  Ultrastable particle-stabilized foams. , 2006, Angewandte Chemie.

[7]  Aldo R Boccaccini,et al.  45S5 Bioglass-derived glass-ceramic scaffolds for bone tissue engineering. , 2006, Biomaterials.

[8]  D. Fornasiero,et al.  The role of surfactant structure on foam behaviour , 2005 .

[9]  H. Sieber,et al.  Novel Synthetic Route to Biomorphic Al2O3 Ceramics , 2005 .

[10]  P. Colombo,et al.  Micro-/Macroporous Ceramics from Preceramic Precursors , 2004 .

[11]  C. P. Whitby,et al.  Some general features of limited coalescence in solid-stabilized emulsions , 2003, The European physical journal. E, Soft matter.

[12]  P. Colombo,et al.  Ceramic foams from preceramic polymers , 2002 .

[13]  M. Edirisinghe,et al.  A Novel Method of Forming Open Cell Ceramic Foam , 2002 .

[14]  J. Park,et al.  Preparation of Porous Cordierite Using Gelcasting Method and its Feasibility as a Filter , 2002 .

[15]  B. Binks.  Particles as surfactants—similarities and differences , 2002 .

[16]  L. Gauckler,et al.  Ceramic Foam For Molten metal Filtration , 1985 .

[17]  L. Gauckler,et al.  Macroporous Ceramics from Particle-Stabilized Wet Foams , 2007 .

[18]  G. Grathwohl,et al.  Zellularkeramik aus autarken Schaumungsprozessen keramischer Suspensionen, Teil 2 , 2007 .

[19]  M. Fuji,et al.  Effects of surfactants on the microstructure and some intrinsic properties of porous building ceramics fabricated by gelcasting , 2006 .

[20]  E. Bernardo,et al.  Novel Microcellular Ceramics from a Silicone Resin , 2004 .

[21]  H. Sieber,et al.  Manufacturing of microcellular, biomorphous oxide ceramics from native pine wood , 2004 .

[22]  L. Andresen,et al.  Evolution of Porosity by Freeze Casting and Sintering of Sol-Gel Derived Ceramics , 2003 .

[23]  F. S. Ortega,et al.  Surfactants: A necessity for producing porous ceramics , 2001 .

[24]  C. Scott,et al.  Processing of porous ceramics , 1992 .