MICROWAVE TREATMENT ACCELERATES SOLAR TIMBER DRYING

Drying is essential before wood can be used. The tortuosity of the moisture transport path in wood profoundly affects drying speed and timber quality. Solar drying can reduce drying costs and energy consumption while producing high-quality timber. Unfortunately, solar drying is much slower than many other kiln systems. Intense microwave heating rapidly generates steam inside moist wood. The resulting internal pressure selectively ruptures the wood structure, creating radial pathways through which moisture may readily move. This modification process does not dry the wood, but vastly increases its permeability, allowing the wood to dry faster with minimal degradation of the timber quality. Subsequent experimentation in a solar kiln resulted in a 17% reduction in drying time for microwave-treated Populus alba samples, compared with untreated samples dried in the kiln at the same time. In a second experiment, microwave-treated Eucalyptus regnans samples dried in 33% less time than untreated samples dried in the solar kiln at the same time. There was no difference in timber quality between treated or control samples during either experiments. These reductions in drying time are attributable to a combination of wood modification and the initial moisture loss associated with microwave treatment. The energy requirements for microwave treatment were approximately 104 kW-h m −3 .

[1]  PETER STEINHAGEN,et al.  THERMAL CONDUCTIVE PROPERTIES OF WOOD, GREEN OR DRY, FROM -40° TO +100° C: A LITERATURE REVIEW , 1998 .

[2]  Wang Xi,et al.  Preliminary Study on Microwave Modified Wood , 2002 .

[3]  S. A. Drury.  Images of the Earth: A Guide to Remote Sensing , 1998 .

[4]  Timothy R. Marchant,et al.  Modelling microwave heating , 1996 .

[5]  Grigoriy I. Torgovnikov,et al.  Dielectric Properties of Wood and Wood-Based Materials , 1993, Springer Series in Wood Science.

[6]  Graham Brodie.  Simultaneous heat and moisture movement during microwave heating , 2006 .

[7]  Graeme C. Wake,et al.  THE MULTIPLICITY OF STEADY-STATE SOLUTIONS ARISING FROM MICROWAVE HEATING. I. INFINITE BIOT NUMBER AND SMALL PENETRATION DEPTH , 2001 .

[8]  K. Ayappa,et al.  Microwave heating: an evaluation of power formulations , 1991 .

[9]  H Peter Steinhagen,et al.  Thermal Conductive Properties of Wood, Green or Dry, from -40 deg to +100 deg C: A Literature Review. , 1977 .

[10]  J. Westwater,et al.  The Mathematics of Diffusion. , 1957 .

[11]  P. S. H. Henry,et al.  The diffusion of moisture and heat through textiles , 1948 .

[12]  C. A. Vriezinga.  Thermal runaway in microwave heated isothermal slabs, cylinders and spheres. , 1998 .

[13]  W. Mühlbauer,et al.  Solar-assisted drying of timber at industrial scale , 2001 .

[14]  W. Palz,et al.  Solar energy in agriculture and industry: Potential of solar heat in European agriculture, an assessment , 1986 .

[15]  Graham Brodie.  Microwave Treatment Accelerates Solar Timber Drying , 2006 .

[16]  I. W. Turner,et al.  The use of numerical simulation as a cognitive tool for studying the microwave drying of softwood in an over-sized waveguide , 1999, Wood Science and Technology.