Reaction between Ti–6Al–4V and Y2O3–SiO2 based face shell for investment casting

[1]  Anders Palmquist,et al.  Commercially pure titanium (cp-Ti) versus titanium alloy (Ti6Al4V) materials as bone anchored implants - Is one truly better than the other? , 2016, Materials science & engineering. C, Materials for biological applications.

[2]  G. Xin,et al.  Mechanism and Influence of Re-dissolution of Zirconium Diacetate-Yttria Shell for Titanium Investment Casting , 2016 .

[3]  M. Ota,et al.  Underwater superoleophobicity of a robust rough titanium dioxide surface formed on titanium substrate by acid treatment , 2015 .

[4]  B. Van Hooreweder,et al.  Crack propagation and fracture toughness of Ti6Al4V alloy produced by selective laser melting , 2015 .

[5]  K. Mutombo,et al.  Interaction between Yttria Fully Stabilized Zirconia or Yttria-Zirconia Blended Face-Coat with Ti6Al4V during Investment Casting , 2014 .

[6]  P. Storozhenko,et al.  High-refractory corundum molds based on a silica-free binder , 2014, Inorganic Materials.

[7]  P. Withey,et al.  The Study of the Oxidation of a Ti–45Al–2Nb–2Mn–0.2B Alloy in the Investment Casting Using an Yttria Face Coat Mould , 2014, Oxidation of Metals.

[8]  Donghong Wang,et al.  Gel-casting of fused silica based core packing for investment casting using silica sol as a binder , 2013 .

[9]  A. Maître,et al.  Microstructural Evolution During Vacuum Sintering of Yttrium Aluminum Garnet Transparent Ceramics: Toward the Origin of Residual Porosity Affecting the Transparency , 2013 .

[10]  P. Withey,et al.  Evaluation of the Inertness of Investment Casting Molds Using Both Sessile Drop and Centrifugal Casting Methods , 2013, Metallurgical and Materials Transactions A.

[11]  Yuyong Chen,et al.  Effect of different primary coating materials and mold temperatures on fluidity of high-temperature titanium alloy , 2012 .

[12]  L. Jia,et al.  Purification in the interaction between yttria mould and Nb-silicide-based alloy during directional solidification: A novel effect of yttrium , 2012 .

[13]  Gao Ming,et al.  Interactions between TiAl alloys and yttria refractory material in casting process , 2010 .

[14]  Zhou Guohong.  Study on Anti-hydration Treatment of Y_2O_3 Powder , 2009 .

[15]  B. Shen,et al.  Reaction between Ti and boron nitride based investment shell molds used for casting titanium alloys , 2008 .

[16]  M. V. Polyakova,et al.  Chelated alkoxyalumoxanes and a silica-free binder based on them , 2007 .

[17]  Lin Yousheng,et al.  The effects of different types of investments on the alpha-case layer of titanium castings. , 2007, The Journal of prosthetic dentistry.

[18]  A. Kostov,et al.  Predicting thermodynamic stability of crucible oxides in molten titanium and titanium alloys , 2006 .

[19]  L. Nastac,et al.  Advances in investment casting of Ti–6Al–4V alloy: a review , 2006 .

[20]  Young-Jig Kim,et al.  Alpha-case formation mechanism on titanium investment castings , 2005 .

[21]  A. Durán,et al.  Yttrium Silicate Coatings for Oxidation Protection of Carbon–Silicon Carbide Composites , 2004 .

[22]  Hui Yang,et al.  Dispersion behavior and stabilization mechanism of alumina powders in silica sol , 2004 .

[23]  L. Guizhong,et al.  Evaporation tendency of components in Ti -6Al -4V alloy melt , 2001 .

[24]  D. Larsen.  Status of investment cast gamma titanium aluminides in the USA , 1996 .

[25]  R. Misra,et al.  On the evaluation of stability of rare earth oxides as face coats for investment casting of titanium , 1990 .

[26]  R. Saha,et al.  Casting of Titanium and its Alloys , 1986 .