Magnetic Field Models and their Application in Optimal Magnetic Divertor Design

In recent automated design studies, optimal design methods were introduced to successfully reduce the often excessive heat loads that threaten the divertor target surface. To this end, divertor coils were controlled to improve the magnetic configuration. The divertor performance was then evaluated using a plasma edge transport code and a “vacuum approach” for magnetic field perturbations. Recent integration of a free boundary equilibrium (FBE) solver allows to assess the validity of the vacuum approach. It is found that the absence of plasma response currents significantly limits the accuracy of the vacuum approach. Therefore, the optimal magnetic divertor design procedure is extended to incorporate full FBE solutions. The novel procedure is applied to obtain first results for the new WEST (Tungsten Environment in Steady-state Tokamak) divertor currently under construction in the Tore Supra tokamak at CEA (Commissariat a l’Energie Atomique, France). The sensitivities and the related divertor optimization paths are strongly affected by the extension of the magnetic model

[1]  Martine Baelmans,et al.  An automated approach to magnetic divertor configuration design, using an efficient optimization methodology (presentation) , 2015 .

[2]  J. Blum.  Numerical simulation and optimal control in plasma physics , 1989 .

[3]  A. Taroni,et al.  Models and Numerics in the Multi-Fluid 2-D Edge Plasma Code EDGE2D/U , 1994 .

[4]  D. P. Kostomarov,et al.  Controlled Fusion and Numerical Simulation , 1986 .

[5]  N. Fedorczak,et al.  Numerical modelling for divertor design of the WEST device with a focus on plasma–wall interactions , 2015 .

[6]  E. Joffrin,et al.  WEST Physics Basis , 2015 .

[7]  Sylvain Brémond,et al.  Quasi-static free-boundary equilibrium of toroidal plasma with CEDRES++: Computational methods and applications , 2015 .

[8]  J. L. Luxon,et al.  Magnetic analysis of non-circular cross-section tokamaks , 1982 .

[9]  P. Valanju,et al.  On heat loading, novel divertors, and fusion reactors , 2006 .

[10]  C. Gil,et al.  The WEST project: Testing ITER divertor high heat flux component technology in a steady state tokamak environment , 2014 .

[11]  Jérôme Bucalossi,et al.  Density Regimes and Heat Flux Deposition in the WEST Shallow Divertor Configuration , 2013 .

[12]  T. Pütterich,et al.  First EMC3-Eirene simulations of the impact of the edge magnetic perturbations at ASDEX Upgrade compared with the experiment , 2012 .

[13]  Daren P. Stotler,et al.  Coupling of Parallelized DEGAS 2 and UEDGE Codes , 1999 .

[14]  Martine Baelmans,et al.  Divertor target shape optimization in realistic edge plasma geometry , 2014 .

[15]  D. Reiter,et al.  The EIRENE and B2-EIRENE Codes , 2005 .

[16]  Martine Baelmans,et al.  A novel approach to magnetic divertor configuration design , 2014 .