Numerical study on the effect of buoyancy-driven pollution source on vortex ventilation performance
暂无分享,去创建一个
Yi Wang | Wenchao Lv | Chen Zhang | Yu Zhou | Chao Zhai | Tongtong Zhao | Songheng Wu | Zhixiang Cao | Yifan An | Yuqing Bai
[1] Xiaohu Yang,et al. Compression effect of metal foam on melting phase change in a shell-and-tube unit , 2022, Applied Thermal Engineering.
[2] Xiaohu Yang,et al. Thermal assessment on solid-liquid energy storage tube packed with non-uniform angled fins , 2021, Solar Energy Materials and Solar Cells.
[3] Xiaohu Yang,et al. Effect of fin number on the melting phase change in a horizontal finned shell-and-tube thermal energy storage unit , 2021, Solar Energy Materials and Solar Cells.
[4] P. Lee,et al. Vortex-enhanced thermal environment for air-cooled data center: An experimental and numerical study , 2021 .
[5] Jinyue Yan,et al. Melting assessment on the angled fin design for a novel latent heat thermal energy storage tube , 2021, Renewable Energy.
[6] Song Mengjie,et al. Modeling study on sessile water droplet during freezing with the consideration of gravity, supercooling, and volume expansion effects , 2021, International Journal of Multiphase Flow.
[7] Mengjie Song,et al. Temporal and spatial frost growth prediction of a tube-finned heat exchanger considering frost distribution characteristics , 2021, International Journal of Heat and Mass Transfer.
[8] H. Park,et al. Characterization of tornado like flows for improving vortex ventilation performance , 2021, Journal of Building Engineering.
[9] Yi Wang,et al. Evaluation of a novel curved vortex exhaust system for pollutant removal , 2021 .
[10] Changling Li,et al. Rapid formation of a shelter-in-place using a combination of vortex flow and chemical oxidation for indoor environments containing neurotoxic gases , 2021 .
[11] S. Cao,et al. Numerical study of compact debris in tornadoes at different stages using large eddy simulations , 2021 .
[12] Changmin Kim,et al. Improvement of Grid Independence Test for Computational Fluid Dynamics Model of Building Based on Grid Resolution , 2020 .
[13] Cho Kwong Charlie Lam,et al. Numerical investigations of Re-independence and influence of wall heating on flow characteristics and ventilation in full-scale 2D street canyons , 2020 .
[14] Yi Wang,et al. Study on ventilation performance of lateral exhaust hood under the influence of two high-temperature buoyant jets , 2020 .
[15] Xin Wang,et al. Particle image velocimetry investigation on air distribution of surface-source buoyancy plume changing heating intensity and structure size in a thermostatic chamber , 2020 .
[16] K. Logachev,et al. A study of separated flows at inlets of flanged slotted hoods , 2020 .
[17] Yi Wang,et al. Experimental study on the performance of hybrid buoyancy-driven natural ventilation with a mechanical exhaust system in an industrial building , 2020, Energy and Buildings.
[18] Yi Wang,et al. Effect of velocity non-uniformity of supply air on the mixing characteristics of push-pull ventilation systems , 2019, Energy.
[19] J. Tu,et al. Characterisation and analysis of indoor tornado for contaminant removal and emergency ventilation , 2019, Building and Environment.
[20] H. Hangan,et al. Wandering corrections from PIV measurements of tornado-like vortices , 2019, Journal of Wind Engineering and Industrial Aerodynamics.
[21] K. Logachev,et al. On the resistance of a round exhaust hood, shaped by outlines of the vortex zones occurring at its inlet , 2019, Building and Environment.
[22] Yi Wang,et al. Predictive accuracy of Boussinesq approximation in opposed mixed convection with a high-temperature heat source inside a building , 2018, Building and Environment.
[23] Yi Wang,et al. Comparison between vortex flow and bottom-supply flow on contaminant removal in a ventilated cavity , 2018 .
[24] Yong Chul Kim,et al. Analytical and empirical models of tornado vortices: A comparative study , 2017 .
[25] Yi Wang,et al. Modeling dispersion mode of high-temperature particles transiently produced from industrial processes , 2017 .
[26] K. Lam,et al. Near-field merging and penetration of triple starting plumes from volumetric heat sources in a calm environment , 2017 .
[27] R. L. Jensen,et al. Performance of constant exhaust ventilation for removal of transient high-temperature contaminated airflows and ventilation-performance comparison between two local exhaust hoods , 2017 .
[28] Yi Wang,et al. Study of the vortex principle for improving the efficiency of an exhaust ventilation system , 2017 .
[29] B. Lin,et al. Numerical investigations of flow and passive pollutant exposure in high-rise deep street canyons with various street aspect ratios and viaduct settings. , 2017, The Science of the total environment.
[30] Yang Yang,et al. An evaluation index for the control effect of the local ventilation systems on indoor air quality in industrial buildings , 2016 .
[31] Angui Li,et al. 1:50 scale modeling study on airflow effectiveness of large spaces mutually connected for underground workshops , 2016 .
[32] Xinyu Zhang,et al. Movement and control of evaporating droplets released from an open surface tank in the push–pull ventilation system , 2016 .
[33] Michele Pinelli,et al. A numerical method for the efficient design of free opening hoods in industrial and domestic applications , 2014 .
[34] Yi Wang,et al. Experimental Investigation on the Flow Characteristics of an Exhaust Hood Assisted by a Jet , 2014 .
[35] A. Dewan,et al. Computational Models for Turbulent Thermal Plumes: Recent Advances and Challenges , 2014 .
[36] Debasis Chakraborty,et al. Optimization of a flight-worthy scramjet combustor through CFD , 2013 .
[37] Ismail Celik,et al. Flow Dynamics and Contaminant Transport in Industrial-Type Enclosing Exhaust Hoods , 2013, Journal of occupational and environmental hygiene.
[38] Ronald Greeley,et al. Dust devil sediment flux on Earth and Mars: Laboratory simulations , 2010 .
[39] Yool Kwon Oh,et al. A Study on Improvement Capture Velocity for Increasing Inhalation Efficiency of Hood in Local Ventilation System , 2008 .
[40] Bahram Moshfegh,et al. Numerical predictions of indoor climate in large industrial premises. A comparison between different k–ε models supported by field measurements , 2007 .
[41] Z. Zhai,et al. Evaluation of Various Turbulence Models in Predicting Airflow and Turbulence in Enclosed Environments by CFD: Part 2—Comparison with Experimental Data from Literature , 2007 .
[42] J. Fontaine,et al. Numerical Simulation and Experimental Validation of Plume Flow from a Heated Disk , 2006 .
[43] Qingyan Chen,et al. Experimental measurements and numerical simulations of particle transport and distribution in ventilated rooms , 2006 .
[44] Tokiyoshi Yamada,et al. Natural ventilation performance of a double-skin façade with a solar chimney , 2005 .
[45] Ronald Greeley,et al. Martian dust devils: Laboratory simulations of particle threshold , 2003 .
[46] D. Ingham,et al. A boundary integral technique for the numerical modelling of the air flow for the Aaberg exhaust system , 2000 .
[47] Qingyan Chen. COMPARISON OF DIFFERENT k-ε MODELS FOR INDOOR AIR FLOW COMPUTATIONS , 1995 .
[48] P. Roache. Perspective: A Method for Uniform Reporting of Grid Refinement Studies , 1994 .
[49] S. Orszag,et al. Renormalization group analysis of turbulence. I. Basic theory , 1986, Physical review letters.
[50] Yi Wang,et al. Flow-field evolution and vortex structure characteristics of a high-temperature buoyant jet , 2021 .
[51] Mahidzal B. Dahari,et al. Eulerian-Lagrangian analysis of solid particle distribution in an internally heated and cooled air-filled cavity , 2015, Appl. Math. Comput..
[52] U. Ghia,et al. Procedure for Estimation and Reporting of Uncertainty Due to Discretization in CFD Applications , 2007 .
[53] R F Huang,et al. Aerodynamic characteristics and design guidelines of push-pull ventilation systems. , 2005, The Annals of occupational hygiene.
[54] Bin Zhao,et al. Comparison of indoor aerosol particle concentration and deposition in different ventilated rooms by numerical method , 2004 .