A brief introduction to ceramic capacitors

A century of diligent R&D has resulted in a wide range of ceramic dielectrics and processing technologies. The technology used to manufacture an MLCC (multilayer ceramic capacitors) that costs pennies was unimaginable 30 years ago. The present trends of enhanced mobility, connectivity, and reliability in consumer, industrial, and military electronics will continue to drive future innovations in ceramic capacitor technology. In addition, power electronics applications are an emerging market in which ceramic capacitors will play an increasing role through improved breakdown strength, enhanced dielectric stability in harsh environments, and innovative packaging. The investment made by the US government to develop high energy density and high temperature capacitor technology will also contribute to the advancement of dielectric materials technology for pulse and power electronic capacitors.

[1]  Clive A. Randall,et al.  Nanostructural-Property Relations in Complex Lead Perovskites , 1990 .

[2]  Ian Burn,et al.  Flux-sintered BaTiO3 dielectrics , 1982 .

[3]  Evangelista Boni,et al.  Advances in Class-I C0G MLCC and SMD Film Capacitors , 2008 .

[4]  Hiroshi Nakamura,et al.  Low Temperature Sintered BaTiO3Ceramics with Bi4Ti3O12Added , 1981 .

[5]  Bernard Raveau,et al.  BARIUM TITANATE PEROVSKITE SINTERED WITH LITHIUM FLUORIDE , 1984 .

[6]  Takaaki Tsurumi,et al.  Dielectric Properties of BaTiO3-Based Ceramics under High Electric Field , 2002 .

[7]  Ho Gi Kim,et al.  The microstructure analysis of cerium-modified barium titanate having core-shell structured grains , 1997 .

[8]  Mark A. Rodriguez,et al.  Behavior of Silver and Palladium Mixtures during Heating , 2004 .

[9]  Bernard Raveau,et al.  Barium Titanate Perovskite Sintered with Lithium Fluoride , 1983 .

[10]  Kang-Heon Hur,et al.  Formation of Core-Shell Structure of BaTiO3 Grains in MLCC , 2007, 2007 Sixteenth IEEE International Symposium on the Applications of Ferroelectrics.

[11]  Relva C. Buchanan,et al.  Effects of Zirconia on Microstructure and Dielectric Properties of Barium Titanate Ceramics , 1989 .

[12]  Beth Jones,et al.  Crystallization kinetics and phase development of PbO-BaO-SrO-Nb2O5-B2O3-SiO2-based glass-ceramics , 2005 .

[13]  Hiroshi Kishi,et al.  Base-Metal Electrode-Multilayer Ceramic Capacitors: Past, Present and Future Perspectives , 2003 .

[14]  Michael S. Randall,et al.  Thin film MLCC , 2007 .

[15]  Ming-Jen Pan,et al.  Glass-ceramics of barium strontium titanate for high energy density capacitors , 2007 .

[16]  John G. Pepin,et al.  Silver‐Palladium Thick‐Film Conductors , 1994 .

[17]  G. Maher,et al.  High resistivity BaTiO3 ceramics sintered in CO-CO2 atmospheres , 1975 .

[18]  Xiaohui Wang,et al.  Formation of Core‐Shell Structure in Ultrafine‐Grained BaTiO3‐Based Ceramics Through Nanodopant Method , 2010 .

[19]  William J. Borland,et al.  Electrode-based causes of delaminations in multilayer ceramic capacitors , 1989 .

[20]  Hiroshi Kishi,et al.  Influence of the Microstructure Evolution on Electrical Properties of Multilayer Capacitor with Ni Electrode , 1998 .

[21]  D. Hennings,et al.  Temperature‐Stable Dielectrics Based on Chemically Inhomogeneous BaTiO3 , 2006 .

[22]  Michael T. Lanagan,et al.  Alkali-free glass as a high energy density dielectric material , 2009 .

[23]  Kikuo Wakino,et al.  High-Dielectric Constant Ceramics for Base Metal Monolithic Capacitors , 1981 .

[24]  H.-J. Hagemann,et al.  Valence change and phase stability of 3 d -doped BaTi O 3 annealed in oxygen and hydrogen , 1979 .

[25]  Thomas R. Shrout,et al.  Dielectric Characteristics of Perovskite‐Structured High‐Temperature Relaxor Ferroelectrics: The BiScO3–Pb(Mg1/3Nb2/3)O3–PbTiO3 Ternary System , 2008 .

[26]  U. Paik,et al.  The effect of heat-treatment on the suspension stability and gelation behavior of Li2O–BaO–Al2O3–SiO2–CaO (LBASC) , 2006 .

[27]  Matthew Rosseinsky,et al.  Electroceramics , 2009 .