Generation of Pad Debris during Oxide CMP Process and Its Role in Scratch Formation

[1]  Yuzhuo Li,et al.  Microelectronic Applications of Chemical Mechanical Planarization , 2007 .

[2]  K. Maex,et al.  Copper CMP with Composite Polymer Core–Silica Shell Abrasives: A Defectivity Study , 2009 .

[3]  Krishnashree Achuthan,et al.  Investigation of pad deformation and conditioning during the CMP of silicon dioxide films , 1996 .

[4]  Gerry Byrne,et al.  Pad conditioning in chemical mechanical polishing , 2002 .

[5]  W. Kim,et al.  The Dependence of Chemical Mechanical Polishing Residue Removal on Post-Cleaning Treatments , 2007 .

[6]  Woo-Sun Lee,et al.  Effects of slurry filter size on the chemical mechanical polishing (CMP) defect density , 2004 .

[7]  A. Philipossian,et al.  Investigation of high-pressure micro jet technology as an alternative to diamond disc conditioning in ILD CMP , 2006 .

[8]  Jin-Goo Park,et al.  Effect of Polish By-Products on Copper Chemical Mechanical Polishing Behavior , 2007 .

[9]  Joon-Yong Yoon,et al.  Chemical mechanical polishing by colloidal silica-based slurry for micro-scratch reduction , 2004 .

[10]  Tetsuya Hoshino,et al.  Mechanism of polishing of SiO2 films by CeO2 particles , 2001 .

[11]  The Synergetic Role of Pores and Grooves of the Pad on the Scratch Formation during STI CMP , 2010 .

[12]  P. Kramer,et al.  A theory of pad conditioning for chemical-mechanical polishing , 2004 .

[13]  N. Kim,et al.  Chemical mechanical polishing performances by filtering and retreatment of used silica abrasives slurry , 2005 .

[14]  Hyosang Lee,et al.  Development of a Pad Conditioning Process for Interlayer Dielectric CMP Using High-Pressure Micro Jet Technology , 2006 .

[15]  Yunn-Shiuan Liao,et al.  Novel diamond conditioner dressing characteristics of CMP polishing pad , 2009 .

[16]  Jin-Goo Park,et al.  Fundamentals of Post-CMP Cleaning , 2007 .

[17]  Haedo Jeong,et al.  Pad Surface Characterization and its Effect on the Tribological State in Chemical Mechanical Polishing , 2004 .

[18]  Pavan Karra,et al.  Prediction of Scratch Generation in Chemical Mechanical Planarization , 2008 .

[19]  Y. Obeng,et al.  Quantitative analysis of physical and chemical changes in CMP polyurethane pad surfaces , 2002 .

[20]  L. Borucki,et al.  Effect of Slurry Injection Position on Slurry Mixing, Friction, Removal Rate, and Temperature in Copper CMP , 2005 .

[21]  A. Busnaina,et al.  Effect of Polysilicon Wettability on Polishing and Organic Defects during CMP , 2009 .

[22]  Brigid Mullany,et al.  The Effect of Pad Wear on the Chemical Mechanical Polishing of Silicon Wafers , 1999 .

[23]  B. Moudgil,et al.  Effect of Soft Agglomerates on CMP Slurry Performance , 2002 .

[24]  John A. Adams,et al.  CMP CoO reduction: slurry reprocessing , 1997 .

[25]  Y. Liao,et al.  DRESSING CHARACTERISTICS OF ORIENTED SINGLE DIAMOND ON CMP POLYURETHANE PAD , 2009 .

[26]  John McGrath,et al.  Polishing pad surface characterisation in chemical mechanical planarisation , 2004 .

[27]  Yun Zhuang,et al.  Investigating the effect of diamond size and conditioning force on chemical mechanical planarization pad topography , 2010 .

[28]  Woo-Sun Lee,et al.  Advantages of point of use (POU) slurry filter and high spray method for reduction of CMP process defects , 2003 .

[29]  Adhesion and Removal of Silica and Ceria Particles on the Wafer Surfaces in STI and Poly Si CMP , 2007 .

[30]  Pad flattening ratio, coefficient of friction and removal rate analysis during silicon dioxide chemical mechanical planarization , 2010 .

[31]  Minoru Tomozawa,et al.  The effect of the polishing pad treatments on the chemical-mechanical polishing of SiO2 films , 1995 .