A 14-bit 100-MS/s digitally calibrated binary-weighted current-steering CMOS DAC without calibration ADC
暂无分享,去创建一个
A 14-bit digitally calibrated digital-to-analog converter (DAC) is presented. This DAC uses a simple current comparator for the current measurement during calibration instead of a high-resolution ADC. Therefore, compared to a calibration scheme utilizing a high-resolution ADC, a faster calibration cycle is possible with smaller additional circuits. To reduce the additional area for calibration and error compensation, the lowest 8-bit DAC is used for both error correction and for normal operation; the additional DACs required for calibration are only of 3-bit and of 7-bit resolution. Nevertheless, a large calibration range is attained. Full 14-bit resolution is achieved on a small chip-area (0.72 mm2). The measurement results show that the spurious free dynamic range is 83.4 (46.6) dBc for signals of 6 kHz (30 MHz) at an update rate of 100 MS/s.
[1] Bang-Sup Song,et al. A self-trimming 14-b 100-MS/s CMOS DAC , 2000, IEEE Journal of Solid-State Circuits.
[2] Jiunn-Tsair Chen,et al. A 14-b 150 MS/s CMOS DAC with Digital Background Calibration , 2006, 2006 Symposium on VLSI Circuits, 2006. Digest of Technical Papers..
[3] M. P. Tiilikainen. A 14-bit 1.8-V 20-mW 1-mm/sup 2/ CMOS DAC , 2001 .
[4] Yonghua Cong,et al. A 1.5 V 14 b 100 MS/s self-calibrated DAC , 2003, 2003 IEEE International Solid-State Circuits Conference, 2003. Digest of Technical Papers. ISSCC..