Effect of counterpart materials on tribological behaviors of copper impregnated carbon/carbon composite under electric current condition

[1]  Y. Huang,et al.  Rise of flexible high-temperature electronics , 2023, Rare Metals.

[2]  Dongzhi Zhang,et al.  Flexible single-electrode triboelectric nanogenerator with MWCNT/PDMS composite film for environmental energy harvesting and human motion monitoring , 2022, Rare Metals.

[3]  Jongk‐Kuk Kim,et al.  Improvement of running-in process of tetrahedral amorphous carbon film sliding against Si3N4 under humid air by O2 plasma post-irradiation , 2021 .

[4]  Huan Zhang,et al.  Effect of carbon matrix on mechanical and tribological properties of Cf/Cu/C composites , 2020 .

[5]  S. A. Rodríguez,et al.  Running-in period for the abrasive wear of austenitic steels , 2020 .

[6]  Xu-dong Peng,et al.  Frictional characteristics of impregnated graphite with different graphitization degree versus chromium stainless steel under varying PV values , 2020, Tribology International.

[7]  Q. Xue,et al.  The degradation of humidity sensitivity of friction for tetrahedral amorphous carbon film by spin-coating hexagonal boron nitride , 2020 .

[8]  Xinchun Chen,et al.  Atomic-scale insights into the interfacial instability of superlubricity in hydrogenated amorphous carbon films , 2020, Science Advances.

[9]  D. Diao,et al.  Current density effect on current-carrying friction of amorphous carbon film , 2020, Carbon.

[10]  Pei Wang,et al.  Microstructural feature and tribological behaviors of pyrolytic carbon-coated copper foam/carbon composite , 2019, Journal of Materials Science.

[11]  Ziqiu Wang,et al.  Superior mechanical properties of sulfonated graphene reinforced carbon-graphite composites , 2019, Carbon.

[12]  M. Kalin,et al.  Influence of contact parameters on the tribological behaviour of various graphite/graphite sliding electrical contacts , 2018, Wear.

[13]  A. F. Il’yushchenko,et al.  The Application of Fibers and Nanoparticles in the Form of Copper-Based Powder Sintered Friction Material with Lubricant Cooling , 2018 .

[14]  Yicheng Ge,et al.  Microstructural development of a C/C-ZrC-Cu composite prepared by reactive melt infiltration with Zr/Cu powder mixture , 2018 .

[15]  Lihui Cui,et al.  Novel copper-impregnated carbon strip for sliding contact materials , 2018 .

[16]  Hongbo Zhang,et al.  The tribological properties of Cf/Cu/C composites under applied electric current , 2017 .

[17]  Xinchun Chen,et al.  Evolution of tribo-induced interfacial nanostructures governing superlubricity in a-C:H and a-C:H:Si films , 2017, Nature Communications.

[18]  Xiaoxu Liu,et al.  Effect of oil temperature and counterpart material on the wear mechanism of ta-CNx coating under base oil lubrication , 2017 .

[19]  Yicheng Ge,et al.  Effect of carbon fiber reinforcement on the tribological performance and behavior of aircraft carbon brake discs , 2017 .

[20]  T. Fan,et al.  Enhanced wetting and properties of carbon/carbon-Cu composites with Cr3C2 coatings by Cr-solution immersion method , 2017 .

[21]  B. Wetzel,et al.  Exploring the influence of counterpart materials on tribological behaviors of epoxy composites , 2016 .

[22]  S. Greenbaum,et al.  Solid state magnetic resonance investigation of the thermally-induced structural evolution of silicon oxide-doped hydrogenated amorphous carbon , 2016 .

[23]  H. Man,et al.  Laser surface alloying of copper with titanium: Part I. Electrical wear resistance in dry condition. Part II. Electrical wear resistance in wet and corrosive condition , 2016 .

[24]  Yicheng Ge,et al.  Preparation of a C/C–Cu composite with Mo2C coatings as a modification interlayer , 2015 .

[25]  Zhihui Zhang,et al.  Preparation and characterization of TiC particulate locally reinforced steel matrix composites from Cu–Ti–C system with various C particles , 2014 .

[26]  Yuan-zhong Hu,et al.  A shear localization mechanism for lubricity of amorphous carbon materials , 2014, Scientific Reports.

[27]  Chikara Yamashita,et al.  Sliding wear behavior of copper alloy impregnated C/C composites under an electrical current , 2013 .

[28]  Fehim Findik,et al.  Friction and wear behaviours of some industrial polyamides against different polymer counterparts under dry conditions , 2008 .

[29]  Y. Takao,et al.  Tensile strength and fracture toughness of C/C and metal infiltrated composites Si-C/C and Cu-C/C , 2008 .

[30]  Yong Huang,et al.  An investigation of heterogeneity of the degree of graphitization in carbon–carbon composites , 2003 .

[31]  K. Friedrich,et al.  On the friction and wear behaviour of PAN- and pitch-carbon fiber reinforced PEEK composites , 1999 .

[32]  K. Habig,et al.  Unlubricated sliding friction and wear of various Si3N4 pairs between 22° and 1000°C , 1990 .

[33]  Dianrong Gao,et al.  Friction and wear properties of stainless steel sliding against polyetheretherketone and carbon-fiber-reinforced polyetheretherketone under natural seawater lubrication , 2014 .

[34]  Christopher G. Pope,et al.  X-Ray Diffraction and the Bragg Equation , 1997 .