Loading frequency effect on the fatigue endurance of structural carbon steels: estimation based on dislocation motion theory and experimental verification of the model

[1]  Q. Yong,et al.  High/very high cycle fatigue behaviors of medium carbon pearlitic wheel steels and the effects of microstructure and non-metallic inclusions , 2019, Materials Science and Engineering: A.

[2]  N. Oguma,et al.  Rate Process Analysis of the Loading Frequency Effect on the Fatigue Endurance of Low Carbon Steel , 2019, Journal of the Society of Materials Science, Japan.

[3]  J. Dirrenberger,et al.  Correlation of the high and very high cycle fatigue response of ferrite based steels with strain rate-temperature conditions , 2017 .

[4]  J. Bach,et al.  On the transition from plastic deformation to crack initiation in the high- and very high-cycle fatigue regimes in plain carbon steels , 2016 .

[5]  K. Sakino.  Deformation Mechanism of SS400 Steel at Very High Strain Rates Using Activation Volume , 2015 .

[6]  A. Ueno,et al.  Dislocation-based interpretation on the effect of the loading frequency on the fatigue properties of JIS S15C low carbon steel , 2015 .

[7]  Tatsuo Sakai,et al.  Effect of the loading frequency on fatigue properties of JIS S15C low carbon steel and some discussions based on micro-plasticity behavior , 2014 .

[8]  Dietmar Eifler,et al.  Cyclic deformation behaviour of railway wheel steels in the very high cycle fatigue (VHCF) regime , 2011 .

[9]  L. Hsiung.  On the mechanism of anomalous slip in bcc metals , 2010 .

[10]  U. Messerschmidt.  Dislocation Dynamics During Plastic Deformation , 2010 .

[11]  D. Caillard.  Kinetics of dislocations in pure Fe. Part II. In situ straining experiments at low temperature , 2010 .

[12]  B. Zettl,et al.  Very high cycle fatigue of normalized carbon steels , 2006 .

[13]  Claude Bathias,et al.  Failure mechanisms of automotive metallic alloys in very high cycle fatigue range , 2006 .

[14]  K. Obrtlík,et al.  Dislocation structures in 16MND5 pressure vessel steel strained in uniaxial tension , 2005 .

[15]  H. Plenk,et al.  Cyclic plastic deformation of tantalum and niobium at very high numbers of cycles , 2002 .

[16]  B. Petukhov,et al.  Temperature dependence of the flow stress and the strain rate sensitivity at the transition from the Peierls mechanism to pinning by localized obstacles , 2000 .

[17]  Meng Zhang,et al.  Micromechanisms of fatigue crack nucleation and short crack growth in a low carbon steel under low cycle impact fatigue loading , 1999 .

[18]  H. Mughrabi,et al.  Influence of temperature and carbon content on the cyclic deformation and fatigue behaviour of α-iron. Part II: Crack initiation and fatigue life , 1998 .

[19]  M. Toyoda,et al.  Dynamic Fracture Toughness Evaluation of Structural Steels Based on the Local Approach , 1998 .

[20]  G. Taylor.  Thermally-activated deformation of BCC metals and alloys , 1992 .

[21]  I. Bernstein,et al.  Influence of deformation substructure on flow and fracture of fully pearlitic steel , 1988 .

[22]  J. Christian,et al.  Stress asymmetries in the deformation behaviour of niobium single crystals , 1983 .

[23]  H. Matsui,et al.  Anomalous slip induced by the surface effect in molybdenum single-crystal foils deformed in a high voltage electron microscope , 1982 .

[24]  S. Hattori,et al.  Effect of Age Hardening by Interstitial Solute Atoms on Behavior of Hysteresis Loop of Low Carbon Steel Under Cyclic Load , 1982 .

[25]  H. Mughrabi,et al.  Cyclic deformation and fatigue behaviour of α-iron mono-and polycrystals , 1981 .

[26]  T. Magnin,et al.  The influence of strain rate on the low cycle fatigue properties of single crystals and polycrystals of two ferritic alloys. , 1979 .

[27]  A. Pus̆kár.  Crack and slip band formation in iron during ultrasonic fatigue at various temperatures , 1978 .

[28]  M. Hori,et al.  The Mixture Rule of Fatigue Strength of Sandwich Type Iron-Copper Composite Plate and the Effect of Thermal Residual Stress , 1978 .

[29]  R. Labusch.  Statistical theory of dislocation configurations in a random array of point obstacles , 1977 .

[30]  H. Matsui,et al.  Anomalous {110} slip in high-purity molybdenum single crystals and its comparison with that in V(a) metals☆ , 1976 .

[31]  H. Mughrabi,et al.  The effect of strain-rate on the cyclic deformation properties of α-iron single crystals , 1976 .

[32]  J. Morris,et al.  Thermally activated dislocation glide through a random array of point obstacles: Computer simulation , 1974 .

[33]  H. Saka,et al.  Direct Observation of Dislocation Multiplication in Iron at Low Temperatures by HVEM , 1973 .

[34]  Ji-Ho Song,et al.  The Cyclic Plastic Strain and Cumulative Fatigue Damage : Fatigue Damage Caused by the Stress Below the Fatigue Limit , 1972 .

[35]  K. Komai,et al.  The Effects of Mean Stress on the Progress of Corrosion Fatigue Damage , 1972 .

[36]  W. Spitzig,et al.  Orientation and temperature dependence of slip in iron single crystals , 1970, Metallurgical and Materials Transactions B.

[37]  U. F. Kocks.  The relation between polycrystal deformation and single-crystal deformation , 1970 .

[38]  M. Makin,et al.  DISLOCATION MOVEMENT THROUGH RANDOM ARRAYS OF OBSTACLES , 1966 .

[39]  G. M. Sinclair,et al.  Parameter Representation of Low-Temperature Yield Behavior of Body-Centered Cubic Transition Metals , 1966 .

[40]  D. F. Stein,et al.  The effect of carbon on the strain-rate sensitivity of iron single crystals , 1966 .

[41]  K. Ohji,et al.  Push-Pull Fatigue Strength of Mild Steel at Very High Frequencies of Stress Up to 100 kc/s , 1965 .

[42]  Masami Yamane,et al.  High Speed Plane Bending Fatigue Test : 4th Report, Theoretical Consideration on the Speed Dependency, Part 2 (the Journal and the Transactions of the Japan Society of Mechanical Engineers) , 1965 .

[43]  J. Michalak.  The influence of temperature on the development of long-range internal stress during the plastic deformation of high-purity iron , 1965 .

[44]  R. Arsenault,et al.  Low-temperature creep of alpha iron , 1964 .

[45]  A. U. Seybolt,et al.  The mechanical properties of iron single crystals containing less than 5 × 10−3 ppm carbon☆ , 1963 .

[46]  K. Emura,et al.  Investigation on the High Frequency Fatigue (The 1st Report) , 1963 .

[47]  H. Conrad,et al.  The effect of temperature and strain rate on the flow stress of iron , 1962 .

[48]  A. M. Turkalo,et al.  Slip band structure and dislocation multiplication in silicon-iron crystals , 1962 .

[49]  D. F. Stein,et al.  Mobility of Edge Dislocations in Silicon‐Iron Crystals , 1960 .

[50]  A. Seeger.  The temperature dependence of the critical shear stress and of work-hardening of metal crystals , 1954 .

[51]  N. Petch,et al.  The Cleavage Strength of Polycrystals , 1953 .

[52]  E. Hall,et al.  The Deformation and Ageing of Mild Steel: III Discussion of Results , 1951 .