Prognosis of fatigue induced stiffness degradation in GFRPs using multi-modal NDE data

Abstract Prediction of expected life of a composite structure especially at the initial stages of degradation is challenging owing to inherent heterogeneity and lack of robust damage growth models. This paper focuses on prognostic study of matrix stiffness degradation in glass fiber reinforced polymers (GFRP) subjected to fatigue testing using data from multi-modal nondestructive evaluation (NDE) techniques, specifically the optical transmission and guided wave sensing. Combining information from multiple sensors exploits advantages of signal complementary and hence effectively improve damage growth modeling and prediction in composites. However, matrix stiffness inferred from two independent NDE techniques varies owing to differences in their sensitivity, measurement noise or model discrepancy, often leading to inconsistent and inaccurate reliability assessment. A joint likelihood updation technique is therefore proposed in existing particle filtering (PF) framework which enables dynamic optimization of Paris-Paris model parameters at every time step by discarding noisy or biased measurements. Comparison of stiffness prediction using multi-sensor data with prognosis results on single sensor or average measurement demonstrates the benefit of joint likelihood based prediction of residual stiffness. An additional advantage of the proposed approach towards reduction of particle count in existing particle filtering framework is discussed, thereby lowering prediction time and computation resources. Overall, multi-sensor NDE and prognosis methodology is discussed for reliable assessment of fatigue life in GFRP composites structures.

[1]  Lalita Udpa,et al.  Optical transmission scanning for damage quantification in impacted GFRP composites , 2016, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[2]  Marcus Reichl Composites meet aviation requirements , 2007 .

[3]  Darryl P Almond,et al.  Impact damage growth in composites under fatigue conditions monitored by acoustography , 2002 .

[4]  H. J. van de Wiel,et al.  Direct strain energy harvesting in automobile tires using piezoelectric PZT–polymer composites , 2011 .

[5]  H. B. Mitchell,et al.  Multi-Sensor Data Fusion: An Introduction , 2007 .

[6]  William J. Owen An Exponential Damage Model for Strength of Fibrous Composite Materials , 2007, IEEE Transactions on Reliability.

[7]  Bin Liu,et al.  A Fatigue Crack Size Evaluation Method Based on Lamb Wave Simulation and Limited Experimental Data , 2017, Sensors.

[8]  Charles R. Farrar,et al.  A reliability-based framework for fatigue damage prognosis of composite aircraft structures , 2012 .

[9]  Lalita Udpa,et al.  Monitoring of fatigue damage in composite lap-joints using guided waves and FBG sensors , 2016 .

[10]  Rick S. Blum,et al.  Multi-sensor image fusion and its applications , 2005 .

[11]  Georgiana Viziteu,et al.  An overview of composite materials technology and their development in multisectorial applications , 2012 .

[12]  Jingmeng Liu,et al.  Multi sensor data fusion method based on fuzzy neural network , 2008, 2008 6th IEEE International Conference on Industrial Informatics.

[13]  M. Ciavarella,et al.  A generalized Paris' law for fatigue crack growth , 2006 .

[14]  Yongming Liu,et al.  In-situ fatigue life prognosis for composite laminates based on stiffness degradation , 2015 .

[15]  Davide Palumbo,et al.  A new rapid thermographic method to assess the fatigue limit in GFRP composites , 2016 .

[16]  Philip J. Withers,et al.  X-Ray Damage Characterisation in Self-Healing Fibre Reinforced Polymers , 2012 .

[17]  Grant P. Steven,et al.  VIBRATION-BASED MODEL-DEPENDENT DAMAGE (DELAMINATION) IDENTIFICATION AND HEALTH MONITORING FOR COMPOSITE STRUCTURES — A REVIEW , 2000 .

[18]  Lalita Udpa,et al.  Data-driven Prognosis of Fatigue-induced Delamination in Composites using Optical and Acoustic NDE methods , 2019, 2019 IEEE International Conference on Prognostics and Health Management (ICPHM).

[19]  Moon Gi Kang,et al.  Super-resolution image reconstruction , 2010, 2010 International Conference on Computer Application and System Modeling (ICCASM 2010).

[20]  Fu Xiao,et al.  A data fusion scheme for building automation systems of building central chilling plants , 2009 .

[21]  Belur V. Dasarathy Industrial applications of multi-sensor multi-source information fusion , 2000, Proceedings of IEEE International Conference on Industrial Technology 2000 (IEEE Cat. No.00TH8482).

[22]  P. C. Paris,et al.  A Critical Analysis of Crack Propagation Laws , 1963 .

[23]  Gangbing Song,et al.  Innovative Data Fusion Enabled Structural Health Monitoring Approach , 2014 .

[24]  S. Tsai,et al.  Introduction to composite materials , 1980 .

[25]  R. Forman,et al.  Numerical Analysis of Crack Propagation in Cyclic-Loaded Structures , 1967 .

[26]  George J. Vachtsevanos,et al.  A particle-filtering approach for on-line fault diagnosis and failure prognosis , 2009 .

[27]  John E. Seem,et al.  Using intelligent data analysis to detect abnormal energy consumption in buildings , 2007 .

[28]  Enrico Zio,et al.  Particle filtering prognostic estimation of the remaining useful life of nonlinear components , 2011, Reliab. Eng. Syst. Saf..

[29]  Rui Seara,et al.  Image segmentation by histogram thresholding using fuzzy sets , 2002, IEEE Trans. Image Process..

[30]  Anne Gégout-Petit,et al.  Stochastic modelling and prediction of fatigue crack propagation using piecewise-deterministic Markov processes , 2015 .

[31]  Eric Moulines,et al.  Comparison of resampling schemes for particle filtering , 2005, ISPA 2005. Proceedings of the 4th International Symposium on Image and Signal Processing and Analysis, 2005..

[32]  Kang Li,et al.  Multisensor Degradation Data Fusion and Remaining Life Prediction , 2017 .

[33]  G. Cloud,et al.  Theory and validation of optical transmission scanning for quantitative NDE of impact damage in GFRP composites , 2016 .

[34]  R. Polikar,et al.  Ensemble based systems in decision making , 2006, IEEE Circuits and Systems Magazine.

[35]  K. Goebel,et al.  Bayesian model selection and parameter estimation for fatigue damage progression models in composites , 2015 .

[36]  Lalita Udpa,et al.  NDE of composite structures using microwave time reversal imaging , 2016 .

[37]  Raimund Rolfes,et al.  A physically based fatigue damage model for fibre-reinforced plastics under plane loading , 2015 .

[38]  P. Djurić,et al.  Particle filtering , 2003, IEEE Signal Process. Mag..

[39]  António Marques,et al.  Health monitoring of FRP using acoustic emission and artificial neural networks , 2008 .

[40]  James Llinas,et al.  An introduction to multisensor data fusion , 1997, Proc. IEEE.

[41]  Victor Giurgiutiu,et al.  Piezoelectric Wafer Embedded Active Sensors for Aging Aircraft Structural Health Monitoring , 2002 .

[42]  Anastasios P. Vassilopoulos,et al.  Fatigue of Fiber-reinforced Composites , 2011 .