Thermodynamic optimisation of the performance of a parabolic trough receiver using synthetic oil–Al2O3 nanofluid

In this paper, results of a thermodynamic analysis using the entropy generation minimisation method for a parabolic trough receiver tube making use of a synthetic oil–Al2O3 nanofluid as a heat transfer fluid are presented. A parabolic trough collector system with a rim angle of 80° and a concentration ratio of 86 was used. The temperature of the nanofluid considered was in the range of 350–600K. The nanofluid thermal physical properties are temperature dependent. The Reynolds number varies from 3,560 to 1,151,000, depending on the temperature considered and volume fraction of nanoparticles in the base fluid. Nanoparticle volume fractions in the range 0⩽ϕ⩽8% were used. The local entropy generation rates due to fluid flow and heat transfer were determined numerically and used for the thermodynamic analysis. The study shows that using nanofluids improves the thermal efficiency of the receiver by up to 7.6%. There is an optimal Reynolds number at each inlet temperature and volume fraction for which the entropy generated is a minimum. The optimal Reynolds number decreases as the volume fraction increases. There is also a Reynolds number at every inlet temperature and volume fraction beyond which use of nanofluids is thermodynamically undesirable.

[1]  J. Eastman,et al.  Measuring Thermal Conductivity of Fluids Containing Oxide Nanoparticles , 1999 .

[2]  H. Herwig,et al.  Local entropy production in turbulent shear flows: a high-Reynolds number model with wall functions , 2004 .

[3]  J. Muñoz,et al.  Analysis of internal helically finned tubes for parabolic trough design by CFD tools , 2011 .

[4]  Wenhua Yu,et al.  Nanofluids: Science and Technology , 2007 .

[5]  S. C. Mullick,et al.  An improved technique for computing the heat loss factor of a tubular absorber , 1989 .

[6]  Aldo Steinfeld,et al.  Potential improvements in the optical and thermal efficiencies of parabolic trough concentrators , 2014 .

[7]  Young I Cho,et al.  HYDRODYNAMIC AND HEAT TRANSFER STUDY OF DISPERSED FLUIDS WITH SUBMICRON METALLIC OXIDE PARTICLES , 1998 .

[8]  Alibakhsh Kasaeian,et al.  Heat transfer enhancement in parabolic trough collector tube using Al2O3/synthetic oil nanofluid , 2014 .

[9]  Somchai Wongwises,et al.  Enhancement of heat transfer using nanofluids—An overview , 2010 .

[10]  A. Bejan.  A Study of Entropy Generation in Fundamental Convective Heat Transfer , 1979 .

[11]  T. Wendelin.  Parabolic Trough VSHOT Optical Characterization in 2005-2006 (Presentation) , 2006 .

[12]  T. Shih,et al.  A new k-ϵ eddy viscosity model for high reynolds number turbulent flows , 1995 .

[13]  S. Kalogirou.  Solar Energy Engineering: Processes and Systems , 2009 .

[14]  F. S. Javadi,et al.  Investigating performance improvement of solar collectors by using nanofluids , 2013 .

[15]  J. Meyer,et al.  Heat transfer and thermodynamic performance of a parabolic trough receiver with centrally placed perforated plate inserts , 2014 .

[16]  Dnyaneshwar R. Waghole,et al.  Experimental Investigations on Heat Transfer and Friction Factor of Silver Nanofliud in Absorber/Receiver of Parabolic Trough Collector with Twisted Tape Inserts , 2014 .

[17]  Christoph Richter,et al.  Concentrating Solar Power - Solar Power on Demand , 2014 .

[18]  D. Kearney,et al.  Test results: SEGS LS-2 solar collector , 1994 .

[19]  Saeed Zeinali Heris,et al.  Analysis of entropy generation between co-rotating cylinders using nanofluids , 2012 .

[20]  Robert A. Taylor,et al.  Applicability of nanofluids in high flux solar collectors , 2011 .

[21]  Josua P. Meyer,et al.  Minimum entropy generation due to heat transfer and fluid friction in a parabolic trough receiver with non-uniform heat flux at different rim angles and concentration ratios , 2014 .

[22]  K. R. Kumar,et al.  Thermal analysis of solar parabolic trough with porous disc receiver , 2009 .

[23]  Soteris A. Kalogirou,et al.  Solar thermal collectors and applications , 2004 .

[24]  Josua P. Meyer,et al.  Numerical investigation of entropy generation in a parabolic trough receiver at different concentration ratios , 2013 .

[25]  D. Cahill,et al.  Nanofluids for thermal transport , 2005 .

[26]  Ching-Jenq Ho,et al.  Numerical simulation of natural convection of nanofluid in a square enclosure: Effects due to uncertainties of viscosity and thermal conductivity , 2008 .

[27]  Eckhard Lüpfert,et al.  Advances in Parabolic Trough Solar Power Technology , 2002 .

[28]  A. Bejan.  Entropy Generation Minimization: The Method of Thermodynamic Optimization of Finite-Size Systems and Finite-Time Processes , 1995 .

[29]  C. Kutscher,et al.  Heat-Loss Testing of Solel's UVAC3 Parabolic Trough Receiver , 2008 .

[30]  H. Blasius,et al.  Das Aehnlichkeitsgesetz bei Reibungsvorgängen in Flüssigkeiten , 1913 .

[31]  O. Manca,et al.  Numerical study of a confined slot impinging jet with nanofluids , 2011, Nanoscale research letters.

[32]  O. García-Valladares,et al.  Numerical simulation of parabolic trough solar collector: Improvement using counter flow concentric circular heat exchangers , 2009 .

[33]  Josua P. Meyer,et al.  Multi-objective and thermodynamic optimisation of a parabolic trough receiver with perforated plate inserts , 2015 .

[34]  S. Wongwises,et al.  An experimental study on the heat transfer performance and pressure drop of TiO2-water nanofluids flowing under a turbulent flow regime , 2010 .

[35]  N. Galanis,et al.  Heat transfer enhancement by using nanofluids in forced convection flows , 2005 .

[36]  H. Herwig,et al.  Entropy production calculation for turbulent shear flows and their implementation in cfd codes , 2005 .

[37]  Wolfgang Schiel,et al.  ULTIMATE TROUGH® - Fabrication, Erection and Commissioning of the World's Largest Parabolic Trough Collector☆ , 2014 .

[38]  H. Herwig,et al.  Direct and indirect methods of calculating entropy generation rates in turbulent convective heat transfer problems , 2006 .

[39]  D. Spalding,et al.  A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows , 1972 .

[40]  Patricia E. Gharagozloo,et al.  A Benchmark Study on the Thermal Conductivity of Nanofluids , 2009 .

[41]  Yangyang He,et al.  Numerical study of heat transfer enhancement by unilateral longitudinal vortex generators inside parabolic trough solar receivers , 2012 .

[42]  K. Ravi Kumar,et al.  Numerical Investigation of Energy-Efficient Receiver for Solar Parabolic Trough Concentrator , 2008 .

[43]  C. T. Nguyen,et al.  Numerical investigation of laminar flow and heat transfer in a radial flow cooling system with the use of nanofluids , 2004 .

[44]  Di Zhang,et al.  Heat transfer and flow analysis of Al2O3–water nanofluids in microchannel with dimple and protrusion , 2014 .